COGNITIVE TPG DLXi ADC Barcode Auto ID Solution User Guide

COGNITIVE TPG DLXi ADC Barcode Auto ID Solution User Guide

PACKAGE CONTENTS:

When a power supply is not provided, select a power supply with the following specification: UL Listed, NEC Class 2 power supply, input rated 100-240 Vac,
1.5/0.8 A, 50/60 Hz; output rated 24 Vdc, 3.125 A, 75 Watts minimum. Ambient Temperature operating range: 5-40 degrees Celsius. Power connector will be a 3-Pin DIN type.
Visit www.CognitiveTPG.com > Support > Drivers & Downloads to find the latest printer drivers, software, and documentation. You may also contact customer service at 888.500.0175, or by emailing support@CognitiveTPG.com.

Connecting Power to the DLXi:

CAUTION!:

Follow power on steps 3 & 4 in sequence or serious electrical damage could occur to the printer and power supply voiding the warranty.

Loading Media:

CAUTION!: ATTENTION!:

Thermal Transfer (TT) model shown. Printer is shown with media cover removed for clarity
For direct thermal printers (DBDxx-xxxx-xxx), go to the “Connecting Data Cable” section of this Guide.
For thermal transfer printers (DBTxx-xxxx-xxx), proceed to the “Loading Ribbon” section of this Guide.

Loading Ribbon (Thermal Transfer Printers):

NOTE: Text on the ribbon leader should be face down in front of the printer.

Loading Ribbon (continued):

DLXi Communication Interfaces:

Connecting Data Cable:

Self-Testing:

Warranty Information:

Please register your printer to activate your warranty.
Go to www.CognitiveTPG.com and click on Warranty Registration.

Helpful Information:

To learn more about CognitiveTPG printers and approved media, please contact your local reseller or CognitiveTPG:
Website: www.CognitiveTPG.com Toll Free: +888.500.0175
For technical support, please call 888.500.0175, Option 4.

Installing the DLXi:

Note: To change printer settings, you can download the CognitiveTPG Printer Administrator Utility (see Downloading
CognitiveTPG Printer Administrator below). To make changes without downloading the Utility, see Changing Printer
Settings Using a USB Flash Drive (memory stick) in the DLXi User’s Guide.
Go to www.CognitiveTPG.com to download the detailed DLXi User’s Guide, Drivers, and other information.

Downloading CognitiveTPG Printer Administrator

In order to easily make printer configuration changes, install the CognitiveTPG Printer Administrator Utility. Follow the CognitiveTPG Printer Administrator installation instructions on http://www.cognitivetpg.com/support/downloads/ DLXi for the DLXi printer. You can also follow this path: http://www.CognitiveTPG.com > Support > Downloads &
Drivers > DLXi. This process will also install Windows drivers for the printer on your computer. Note that USB, Ser/Com, or Ethernet connection is required for configuring your printer via this utility.

Warning – Shock Hazard and Static Discharge

Never operate the printer in a location where it can get wet. Personal injury could result. The discharge of electrostatic energy that accumulates on the surface of the human body or other surfaces can damage or destroy the printhead or electronic components used in this device. DO NOT TOUCH the printhead or the electronic components under the printhead carriage.

Caution – Printer Setup and Handling / Attention – Configuration et

manipulation de l’imprimante

When installing or modifying the printer setup or configuration, ALWAYS TURN THE POWER OFF before: (1) connecting any cables,
(2) performing any cleaning or maintenance operations, or (3) moving the printer.

European Compliance

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RoHS COMPLIANCE: 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).

WEEE:

Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). For WEEE recycling and recovery information, refer to the CognitiveTPG Web site.

Federal Communications Commission (FCC) Radio Frequency Interference

Statement Warning

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense

Information to the User

This equipment must be installed and used in strict accordance with the manufacturer’s instructions. However, there is no guarantee that interference to radio communications will not occur in a particular commercial installation. If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to contact Cognitive LLC immediately. Cognitive LLC. is not responsible for any radio or television interference caused by unauthorized

modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Cognitive LLC. The correction of interferences caused by such unauthorized modification, substitution or attachment will

be the responsibility of the user. In order to ensure compliance with the Product Safety, FCC and CE marking requirements, you must use the power supply, power cord, and interface cable which are sold for use with this product or which meet the following parameters:

This product has been tested for Safety and EMC Compliance as indicated below and is intended for use only with the Power Supply and cables included. If using the parallel interface, please add the enclosed clamp-on ferrite to the parallel cable being used and secure it in place with the cable ties supplied.

Industry Canada (IC) Radio Frequency Interference Statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

EU Declaration of Conformity

Object of the Declaration: Product: Thermal Receipt Printer
Model: LBDXX-XXXX-XXXX LBTXX-XXXX-XXXX DBDXX-XXXX-XXXX
DBTXX-XXXX-XXXX (X = any alphanumeric character or blank space)
Manufacturer: Cognitive LLC
Address: 5750 W. Bloomingdale Ave, Unit 1, Chicago IL 60639
This declaration is issued under the sole responsibility of the manufacturer
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

2014/35/EU The Low Voltage Directive

2014/30/EU The Electromagnetic Compatibility Directive

2011/65/EU The Restriction of Hazardous Substances Directive

2012/19/EU The Waste from Electrical and Electronic Equipment Directive (WEEE) Conformity is shown by compliance with the applicable requirements of the following documents:

Harmonized Standards:

EN 63000:2018 Technical Documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
EN 55024:2010 Information Technology Equipment Immunity Characteristics
EN 55032:2012/AC:2013 Class A ITE emissions requirements (EU)
EN 61000-3-2:2014 Harmonic current conditions
EN 61000-3-3:2013 Limitation of voltage fluctuations and flicker in low- voltage supply systems
EN 62368-1:2014
IEC 62368-1:2014 – Product Safety Standard.
EN 60950-1 : 2006 / A11:2009 / A1:2010 / A12:2011 / A2:2013
IEC 60950-1:2005/AMD2:2013/AMD1: 2009 – Product Safety Standard. Signed for and on behalf of: Cognitive LLC
Place of issue: Chicago IL USA Date of issue: 17 December 2021
Name: Elvin Yavuz
Position: Regulatory Compliance

Copyright 2021 Cognitive LLC. CognitiveTPG and DLXi are trademarks of Cognitive LLC. Other products and corporate names used in this publication may be trademarks or registered trademarks of other companies and are used only for explanation and to their owner’s benefit, without intent to infringe. No part of this guide may be reproduced for any purpose or in any form, including electronic storage and retrieval without the express permission of Cognitive LLC.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>