Govee H6181 RGB LED TV Backlight User Manual
- June 9, 2024
- Govee
Table of Contents
Govee H6181 RGB LED TV Backlight
At a Glance
- LED Strip Lights 1
- Control Box 1
- Service Card 1
- User Manual 1
Specifications
- Length 4 x 50cm I 4 x 1.64ft
- Lighting Color RGB
- Waterproof NO
- Control Method App & Control Box
- Power Supply USB SV
Installing Your Strip Lights
- Preparation Before Installing
- Unpack the box and check all items listed in the packing list.
- Plug the adapter into the power outlet to check whether the lights turn on.
- Installing Steps
- Wipe the surface to make sure it’s clean and dry.
- Peel off the protective film on the tape, stick the strip on and press over it firmly.
- Reinforce via clips around corners.
- Peel off the protective film on the control box and stick it on.
- Power on the strip lights and start using.
Controlling with the Control Box
Button
- On/off
- Color Changing
- Music Mode/Brightness Adjusting
Function
- Turn the light on/off.
- Press to cycle through 9 colors.
- Press to enter music mode.
- Press and hold to cycle through the 6 brightness levels.
Downloading the Govee Home App
- You need a smartphone or tablet running iOS 9.3 (or above) or Android 4.3 (or above).
- Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
Connecting the Strip Lights to the App
- Turn on Bluetooth in your mobile phone.
- Open Govee Home app and tap”+” icon in the top right corner.
- Select” H6181 “in the device list.
Troubleshooting
-
The strip light flickers or the light is not bright enough.
-
a. Plug out the USB port and re-plug it in.
-
b. Power on the strip lights with a SV USB adapter. ( Notice : The adapter is NOT included).
-
The adhesive tape is not strong enough.
-
a. Make sure the installation surface is clean and dry.
b. Firmly press over the strip after sticking.
c. Reinforce the installation via more clips and tape. -
The control box doesn’t work. Re-plug in the USB port and try again
-
Cannot connect to Bluetooth.
-
Do not skip Bluetooth connection in the app.
-
Make sure Bluetooth in your mobile phone has been turned on.
-
It may be caused by incompatibility between the phone system and the app. Please change to another mobile phone and connect again.
-
Re-power on the strip and re-turn on Bluetooth in your phone to try again.
-
Keep the distance between the strip and the phone less than 1 m/3.28ft while connecting.
-
Keep obstructions between the strip and the phone as few as possible.
-
The strip doesn’t match the same color /Some lamp beads don’t light up. Please contact Govee support team in time for return.
Customer Service
- Warranty : 12-Month Limited Warranty
- Support : Lifetime Technical Support
- Email : [email protected]
- Official Website : www.govee.com
For FAQs and more information, please visit: www.govee.com