AVIANCE Lighting HD04047 28 Inch 3-Light Bronze Cast Brass Hardwired Outdoor Fixture Installation Guide

AVIANCE Lighting HD04047 28 Inch 3-Light Bronze Cast Brass Hardwired

Outdoor Fixture

Product Specifications

• Model: HD04047
• Maximum Wattage: Refer to fixture specifications
• Fixture Finish: Not specified
• Power Source: Electrical wiring

Product Usage Instructions

Assembling the Fixture

1. Shut off the power at the circuit breaker and remove the old fixture, including the single bar.
2. Unpack the new fixture carefully and lay out all parts on a clear area to avoid losing any small parts.
3. Place the candle sleeve (G) over the lamp holder.
4. Install light bulbs (not included) according to the fixture’s specifications. Do not exceed the maximum wattage rating.
5. Attach the pipe thread (C) into the shade of the lamp body (D) by aligning the box top center screw hole with the pipe thread and turning it clockwise until tight. Attach the cove (B) to the lamp  body (D) and secure it with the loop (A).
6. Attach the assembled lamp body to the post (F, not included) and secure it with screws (E).

Connecting the Wires

1. Connect the Black wire from the fixture to the black house (hot) wire and the white wire from the fixture to the white (neutral) house wire. Ensure all wire nuts are secured.
2. If there are ground wires in your outlet box, connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
3. Tuck the wire connections neatly into the post.

FAQ:

• Q: What should I do if I exceed the maximum wattage rating?
  A: It is crucial not to exceed the maximum wattage rating as it can lead to overheating and potential hazards. If you have exceeded the rating, immediately replace the bulbs with ones that meet the specified wattage.

• Q: How do I clean and maintain this fixture?
  A: To clean the fixture, ensure it is turned off and cool before gently wiping it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. Regular dusting can help maintain its appearance.

• Q: Can I use LED bulbs with this fixture?
  A: Yes, you can use LED bulbs as long as they are compatible with the fixture’s specifications and do not exceed the maximum wattage rating.

ASSEMBLING & INSTALLATION INSTRUCTIONS

The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.  HD04047

•   WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
•   ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.

ASSEMBLING THE FIXTURE (Fig.1)

1.  Shut off the power at the circuit breaker and remove old fixture, including the single bar.
2.  Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
3.  Put the candle sleeve(G) over the lamp holder.
4.  Install the light bulbs (No Included) in accordance with the fixture’s specifications. NOTE : DO NOT EXCEED THE MAXIMUM WATTAGE RATING
5. Attach the pipe thread(C) into the shade of the lamp body(D), aligning the box top center screw hole with the pipe thread, by turning it clockwise until tight. Attach the cove (B) to the lamp body(D), then lock it securely with the loop(A).
6.  Attach the assembly lamp body onto the post (F, no included) and lock it securely with the screws (E).

CONNECTING THE WIRES (Fig.2)

1.  Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
2.  Tuck the wire connections neatly into the post.

Your installation is now complete. Return power to the junction box and test the fixture.  Thank you for purchasing an AVIANCE product. Need assistance with parts or assembly? Please email customer service at: info@aviancelighting.net

©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC

Documents / Resources

| AVIANCE Lighting HD04047 28 Inch 3-Light Bronze Cast Brass Hardwired Outdoor Fixture [pdf] Installation Guide
HD04047, HD04047 28 Inch 3-Light Bronze Cast Brass Hardwired, Outdoor Fixture, 28 Inch 3-Light Bronze Cast Brass Hardwired Outdoor Fixture, 3-Light Bronze Cast Brass Hardwired Outdoor Fixture, Cast Brass Hardwired Outdoor Fixture, Hardwired Outdoor Fixture, Outdoor Fixture, Fixture
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>