TOOLCRAFT TO-8706357 Kid Earmuffs Instruction Manual

June 1, 2024
Toolcraft

Operating instructions
Earmuffs for kids “KM-2”
Item no. 2902119

Intended use

These earmuffs are intended to protect children‘s ears from hazardous noise, provided they are worn correctly and with due care.
They filter high-frequency noises in very loud surroundings, such as workshops and factories with noisy machinery, and prevent excessive noise exposure when using chain saws or similar equipment.
This product is suitable for children aged 4 and over.
Using the product for purposes other than those described above may damage the product.
Improper product use can cause a short circuit, fire, electric shock, other hazards.
This product complies with statutory, national and European regulations. For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Always provide these operating instructions when giving the product to a third party.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.

Delivery content

  • Earmuffs for kids
  • Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Explanation of symbols

The following symbols appear on the product/device or in the text:
This symbol warns of hazards that can lead to personal injury. Read the information carefully.
Before using the device for the first time, carefully read the operating instructions.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

5.1 General

  •  This product is not a toy. Keep it out of the reach of children and pets.
  • Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
  • Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.

5.2 Handling

  • Please handle the product carefully. Impact, shocks or a fall even from a low height can damage the product.

5.3 Operating environment

  • Do not expose the product to any mechanical stress.
  • Protect the product from extreme temperatures, strong jolts, flammable gases, vapours and solvents.
  • Protect the product from high humidity and moisture.
  • Protect the product from direct sunlight.

5.4 Operation

  • There is a risk of permanent hearing damage due to non-compliance with the specified noise limits.
  • You should carefully select the earmuffs and ensure they fit perfectly. Sound insulation is reduced if they do not fit properly.
  • Make sure you check the earmuffs and sealing rings thoroughly before use. Never use the earmuffs if they or the sealing rings show signs of damage, such as cracks or similar.
  • Ensure that the headband is not bent or deformed, as this can impair the fit and reduce sound attenuation or insulation.
  • The fitting of hygiene covers to the cushions may affect the acoustic performance of the earmuffs.
  • For optimal protection, ear cushions should fit firmly around the head and form a good seal around the ears.
  • Anything that interferes with the seal, such as long hair (pull back as far as possible), thick or poorly fitting eyeglass temples, pencils, or caps, will reduce protection.
  • Put the earmuffs on before entering a noisy environment and leave them on until you are no longer exposed to noise.

Using the earmuffs

  • These earmuffs conform to the size requirements stipulated in EN-352-1:2020 and are suitable for the majority of users.
    Protection against noise cannot be guaranteed if you do not observe the insulation specifications listed in the “Technical data” section.

Putting on the earmuffs

TOOLCRAFT TO-8706357 Kid Earmuffs - earmuffs

  • Pull the two ear cups apart and fit the ear cushions over both ears.
  • The cushions should completely cover your ears and fit firmly around your head.
  • Ensure that the headband sits on top of your head. If necessary, adjust the ear cups by moving them in or out of their holders to fit your head.
  • Ensure that the seal is sufficient to provide effective noise reduction.

Cleaning and maintenance

Important:

  • If the following recommendations are not followed, both attenuation (insulation) and function of the earmuffs may be impaired.
  • Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the housing or cause the product to malfunction.
  • Do not immerse the product in water.
  • Clean the outer surfaces of the earmuffs, headrest and ear cups regularly with mild soap and lukewarm water or alcohol swabs. Leave to dry in the air.
  • Do not store the earmuffs at temperatures above 55 °C, such as behind a windshield or window.
  • The earmuffs must be regularly inspected for cracked or worn parts and replaced as needed.
  • Store the earmuffs in a clean and dry plastic container (bag or box) when you are not using them.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

  • in our Conrad offices
  • at the Conrad collection points
  • at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Declaration of Conformity (DOC)

  • Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads
    Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Technical data

10.1 Earmuffs
SNR value ……………………………… 27 dB; H: 33.0 dB; M: 24.0 dB; L: 17.0 dB
Standard. ……………………………….. EN 352-1:2020
PPE regulation ……………………….. (EU) 2016/425, Category III
Size……………………………………….. medium
Material class………………………….. Code 26-010
Product materials…………………….. ear cups: acrylonitrile butadiene styrene (ABS), spongelike padding made of polyurethane (PU)

10.2 Attenuation data
Insulation specifications at different frequencies
Tested in accordance with EN 352-1:2020:

Frequency (Hz)| 125| 250| 500| 1000| 2000| 4000| 8000
---|---|---|---|---|---|---|---
Average insulation value (dB)| 14.6| 15.5| 22.9| 30.7| 34.4| 41.5| 41
Standard deviation (dB)| 3.2| 2.1| 1.8| 2.3| 2.8| 3.0| 2.7
Assumed insulation value (dB)| 11.4| 13.3| 21.1| 28.4| 31.5| 38.5| 38.3
SNR = 27 dB| H = 33 dB| M = 24 dB| L = 17 dB
SNR m = 38.3| H m = 35.0| M m = 25.4| L m = 18.7
SNR s = 1.3| H s = 1.9| M s = 1.2| L s = 1.8

Example

  1. The ambient noise level as measured at the ear is 92 dBA.
  2. The SNR is 24 decibels (dB).
  3. The level of noise entering the ear is approximately equal to 68 dBA.

The level of noise entering a person’s ear when the earmuffs are worn as instructed is closely approximated by the difference between the A-weighted ambient noise level and the SNR.

10.3 Other
Dimensions (folded)
(W x H x D) …………………………….. approx. 120 x 130 x 100 mm
Dimensions (unfolded)
(W x H x D) …………………………….. approx. 120 x 180 x 100 mm
Weight …………………………………… approx. 200 g

10.4 Ambient conditions
Operating/storage temperature …. 0 to +55 °C, 0 – 90% RH (non-condensing)

Additional information

Manufacturer: Guangzhou J&Y Safety Products
Manufacturer Co., Ltd.
No. 5, Yongle Road, Huachang Town, Huadu
District, Guangzhou, China
Tel.: +86-20-36853918| Distributor
Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirsch au, Germany
---|---
Notified Body: SATRA Technology Europe Ltd.,
Brace town Business Park, Clonee, Dublin,
D15 YN2P, Ireland
Notified Body number: 2777| Notified Body:
SATRA Technology Centre Ltd.,
Wyndham Way, Telford Way,
Kettering Northampton shire NN16 8SD, UK
Notified Body number: 0321

These Notified Bodies are responsible for the EU examination process and ongoing conformity.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *#2902119_V1_1223_02_m_VTP_EN

TOOLCRAFT TO-8706357 Kid Earmuffs - qr code www.conrad.com/downloads
2777
EN 352-1: 2020

Documents / Resources

| TOOLCRAFT TO-8706357 Kid Earmuffs [pdf] Instruction Manual
TO-8706357 Kid Earmuffs, TO-8706357, Kid Earmuffs, Earmuffs
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals