TOOLCRAFT 2499003 Portable LED Work Light Instruction Manual
- June 3, 2024
- Toolcraft
Table of Contents
TOOLCRAFT 2499003 Portable LED Work Light
Portable LED Work Light
Item no: 2499003
Intended use
The product is a portable LED work light with rechargeable battery. The product has an IP65 ingress protection rating and is protected from dust and low pres-sure water jets from any direction. The product is suitable for outdoor use. Do not submerge the product in water. If you use the product for purposes other than those described, the product may be dam-aged. Improper use can result in short circuits, fires, electric shocks or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Power adaptor
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- This product is constructed according to protection class III.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from direct sunlight
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses
Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
- Never connect or disconnect power adaptors if your hands are wet.
- For safety reasons, disconnect the power adaptor from the mains socket during storms.
- Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
- Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Unplug the power adapter from the mains socket.
- Use a new power adapter of the same design. Do not use the damaged adapter again. .
Li-ion battery
- Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
- Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
- Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
- Never charge the rechargeable battery of the product unattended.
- When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging
LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
- Looking into an LED light in darkness can cause temporarily blindness. This can be dangerous in high-risk environments.
Connected devices
Also observe the safety and operating instructions of any other devices which
are connected to the product.
Ingress protection
The product has an IP65 ingress protection rating and is protected from dust
and low pressure water jets from any direction. The product is suitable for
outdoor use. Do not submerge the product in water
Operation
Important:
To protect the IP65 ingress protection rating, make sure the port cover forms
a good seal when closed.
Charging the battery
Important:
- To prevent overheating, switch the light OFF before charging.
- Fully charge the battery before first use and before storage.
- The light will go OFF when the battery needs to be recharged. Recharge the battery using the included power adaptor.
- The indicators will blink during charging. If the indicators do not light up during charging, disconnect then reconnect the power adaptor.
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth. Moisten the cloth if needed.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall disposeof it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non- destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details onour website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
Product
This product contains a light source of energy efficiency class E.
- Input ……………………………………….. 15 V/DC, 1.5 A
- Power ……………………………………… max. 19 W
- Rechargeable battery ………………… 11.1 V 5200 mAh Li-Ion
- Battery recharge time ………………… approx. 4.5 hrs
- Operating times ………………………… Low: 10.5 hrs, Medium: 5.5 hrs, High: 3 hrs
- Protection class ………………………… III
- Color Temperature ……………………. 6500 K
- LED…………………………………………. 1 pc COB
- Lumen……………………………………… max. 2300 lm
- Low: 500 lm, Medium: 1000 lm, High: 2300 lm
- Ingress protection……………………… IP65
- Operating conditions………………….. -10 to +40 °C
- Storage conditions…………………….. -20 to +50 °C
- Dimensions (W x H x D) …………….. 225 x 200 x 70 mm
- Weight …………………………………….. 1130 g
Power adapter
- Input ………………………………………. 100 – 240 V/AC, 50/60 Hz
- Output …………………………………….. 15 V/DC, 1.5 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2499003_V1_0522_dh_mh_en 529796491-2 I1/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>