TOOLCRAFT 2522106 Rechargeable LED Work Light Instructions
- June 3, 2024
- Toolcraft
Table of Contents
2522106 Rechargeable LED Work Light
Instructions Manual
Rechargeable LED Work Light
Item no: 2522106
1 Dismantling recommendations
- Disconnect from the power supply.
- Ask for help from a professional if needed.
2 Dismantling instructions
Step 1
Remove 4x screws. Step 2
Open the back shell.
Step 3
Desolder the cables from the battery.
Step 4
Desolder the cables from the PCB board.
Step 5
Remove the screws in the silver part.
Step 6
Take out the COB and PCB board.![TOOLCRAFT 2522106 Rechargeable LED Work Light
- Figure 6](https://manuals.plus/wp-content/uploads/2022/10/TOOLCRAFT-2522106 -Rechargeable-LED-Work-Light-Figure-6.jpg)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2522106_V1_0622_hs_en 569276043 I1/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>