TOOLCRAFT TO-8994309 Magnetic Helping Hands Instruction Manual

TOOLCRAFT TO-8994309 Magnetic Helping Hands

Specifications

• Product Name: Magnetic Helping Hands
• Item Number: 2998103
• Intended Use : For working on small components, such as soldering, electronics repair, crafts, or other detailed tasks Indoor Use Only
• Material: Steel arms with alligator clips, adjustable steel base

FAQ

• Q: Can I use the product outdoors?
• A : No, the product is intended for indoor use only. Outdoor use may lead to damage.
• Q: Can I modify the product?
• A : No, for safety and approval purposes, do not rebuild and/or modify the product as it may result in hazards.
• Q : How should I store the product when not in use?
• A : Store the product in a safe place away from moisture and out of reach of children or pets.

Intended use

• The helping hands are designed with alligator clips and magnetic ends so you can freely place them on the metal base. Use this product to work on small components, such as soldering, electronics repair, crafts, or other detailed tasks.

• The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.
  If you use the product for purposes other than those described, the product may be damaged. Improper use can result in other hazards.

• The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product.

• Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.

• All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery content

• 4 x Steel arms with alligator clips
• 1 x Adjustable steel base
• Operating instructions

Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

• The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General information

• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions that remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
• NOTE: This product contains strong magnets. Keep this product away from electronic devices or magnetic storage media, such as magnetic cards, mobile phones, laptops, etc., to avoid damage to the device.
• WARNING! This product might interfere with hearing aids, pacemakers, or other medical devices. Consult your physician before using this product.

Handling

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Magnets lose magnetism when exposed to high temperatures. To avoid product damage, do not expose the assembled product or helping hands to high temperatures, as this can cause the magnetic ends of the helping hands to weaken or lose their magnetism.

Operation

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to serious transport-related stresses.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the product from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Product Overview

1. Adjustable stand
2. Suede pads
3. Magnetic ends
4. Helping hands with flexible arms
5. Alligator clips

Assembly

Note:
This product contains strong magnets. Keep this product away from electronic devices or magnetic storage media, such as magnetic cards, mobile phones, laptops, etc., to avoid damage to the device.

WARNING! This product might interfere with hearing aids, pacemakers, or other medical devices. Consult your physician before using this product.

1. Place the product on a flat, level and stable work surface.
2. Unfold the sidebars of the magnetic base.
3. Place the helping hands on the metal base. The strong magnets on the ends of the helping hands allow you to freely position the helping hands on the metal base to suit your project.
4. Use the alligator clips to hold the part or object of your task. The alligator clips can be rotated 360 degrees.
5. Adjust the flexible arms and neck to the desired angle.

Cleaning and care

Important

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water
• Wipe the metal base and attachments with a soft cloth, dry or lightly moistened with water. Dry thoroughly after cleaning.
• Store the product in a shaded, cool and dry place.

Technical data

• Materials……………………………………….Metal, magnet
• Operating conditions……………………….-10 to +40 °C, 0 – 85 % RH (non-condensing)
• Storage conditions………………………….0 to +50 °C, 0 – 85 % RH (non-condensing)
• Product dimensions (L x W x H)……….270 x 235 x 255 mm
• Base…………………………………………….270 x 235 x 15 mm
• Helping hand (x4)…………………………..24 x 24 x 240 mm
• Weight………………………………………….0.8 kg

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems requires prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>