VIDEX VLE-BN-36065B LED luminaire User Guide
- June 13, 2024
- VIDEX
Table of Contents
VLE-BN-36065B LED luminaire
User Guide
VLE-BN-36065B LED luminaire
TECHNICAL PARAMETERS
LED LINEAR LIGHT
TECHNICAL PARAMETERS
-
Rated input voltage (V) and frequency (Hz);
-
Rated on-mode power (W) (Pun);
-
Rated light output:
3.1. Rated useful luminous flux (Фuse);
3.2. Energy efficiency class according to European Commission Regulation 2019/2020;
3.3. Energy efficiency class according to the technical regulations of Ukraine;
INTERPRETATION OF THE ICONS -
Correlated color temperature (K).
-
The product is not compatible with light dimmers;
-
Color rendering index;
-
Effective illumination zone (°);
-
Nominal lifetime L70B50 (hours);
-
Class of protection against dust and moisture. Protection against solid foreign objects larger than 12 mm provided;
-
On/off cycles;
-
The light does not have a noticeable flicker;
-
Time to acquire 100% light flux (sec.);
-
No mercury contains;
-
Minimum distance from the illuminated object;
-
The product can be installed and used in/on normally flammable surfaces;
-
Protection against electric shock class I. A product in which the means of protection against electric shock, in addition to the main insulation, is an additional protective circuit connected to the grounding of the power supply network;
-
For indoor use only;
-
Product compliable with standards of eco-design and energy labeling according to Commission Regulation (EU) 2019/2020;
-
Caution, risk of electric shock;
-
A damaged light diff user must be replaced;
-
Replacement of the built-in light source can be performed by an authorized person of the manufacturer;
-
Replacement of the control gear can be performed by an authorized person of the manufacturer;
-
The product complies with the technical regulations of Ukraine;
-
The product meets the requirements of EU directives;
ENVIRONMENTAL PROTECTION -
Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
– Overall dimensions (mm), product weight (g/kg), rated current (mA), operating temperatures range (°C), production date and batch number are indicated on individual packaging;
– Light power curve type: D (cosine).
– Product materials: Aluminum, polycarbonate;
– The shelf life before the start of use is unlimited;
PRODUCT’S PURPOSE AND APPLICATION
The product is intended for general lighting of premises.
CONTENTS OF THE KIT
- Lamp;
- A set of fastening elements;
- User manual;
- Individual packaging.
MOUNTING AND CONNECTION INSTRUCTIONS
Before installation, it is necessary to read the instructions. Installation
must be performed by a specialist with appropriate qualifications. Installation
can be performed only when the power supply is turned off . The product must
be installed on fl at surfaces, primarily on ceiling. Please install and
connect according to the diagram below. The connection must be made using a
screw or self-clamp type terminal block (not included). Before the first use,
it is necessary to check the correctness of the mechanical fastening and
connection. The product can only be used in a network that meets the energy
requirements and quality standards stipulated by law.
FUNCTIONAL CHARACTERISTICS
This product can only be used indoor. The product has no protection against
moisture.
MAINTENANCE AND SAFETY INSTRUCTIONS
Any maintenance works should be carried out with the electricity turned off ,
and the product should be cooled down. Do not cover the lamp with heat-
insulating materials, ensure free access of air. Clean only with soft and dry
cloths. Do not use chemical detergents. The product may only be supplied with
rated voltage or voltage within the given range. It is forbidden to use the
product with a damaged light diff user, damaged wiring or connection points.
WARNING! Do not look directly at the LED beam. Do not attempt to disassemble
the product, as this may impair performance and void the warranty. The product
cannot be used in adverse conditions, e.g. dust, water, moisture, vibration,
explosive atmosphere, fumes or chemical fumes, etc. The LED light source and
the control gear inside the lamp cannot be replaced by end user. The used
product should be disposed of in accordance with current regulations.
Failure to follow these instructions may result into e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
The producer shall not be responsible for any damage resulting from the
failure to follow above instructions.
STORAGE AND TRANSPORTATION
Before delivery to the direct point of sale, the product must be stored in the
manufacturer’s packaging at a temperature from -20°С to +40°С, in a dry room
and without exposure to direct sunlight.
Transportation can be carried out by land, sea, air transport in the
manufacturer’s transport packaging.
WARRANTY
The warranty period for the product is indicated on the individual packaging
and begins from the date of sale. During the warranty period, a faulty product
can be exchanged or returned with prove of purchase and all components and
accessories preserved. The following does not apply with the scope of limited
warranty:
– Misuse the product and cause the products components damage;
– Unauthorized disassemble or the presence of deep mechanical damage to the
product;
– Damage due to force majeure.
The manufacturer reserves the right to make changes to this user’s manual or
technical changes to the product.
not included
Producer/Producent: Allegro opt Sp. z o.o.,
Handload 23, 05-120 Legionowo, Poland.
Made in P.R.C.
www.videx.com.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>