Altronix RB610 Break Away Relays Instructions
- June 3, 2024
- Altronix
Table of Contents
Altronix RB610 Break Away Relays
Specifications
- Each cluster contains six (6) relay modules that can easily be separated.
- 12VDC or 24VDC selectable operation.
- Current draw 50mA.
- 10A/120VAC or 28VDC SPDT contacts.
- Screw terminals accommodate up to 12 gauge wire.
Board dimensions: (L x W x H): 2” x 1.6” x 0.75” (50.8mm x 40.6mm x 19.05mm ).
Installation Instructions
- In order to break the relay cluster apart (if desired), put a pencil on a flat surface, position the scoring line on top of the pencil and push lightly. Relay should easily break away from cluster.
- Connect trigger input or voltage source to screw terminals marked [POS (+) & NEG (–)]. (Unit is factory set for 12VDC operation – cut jumper for 24VDC operation).
- Connect screw terminals marked [NC] (Normally Closed) or [NO] (Normally Open) and [C] (Common)] to operate desired devices.
Altronix is not responsible for any typographical errors. Product
specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA |
phone: 718-567-8181 |
fax: 718-567-9056
website: www.altronix.com |
e-mail: info@altronix.com |
Lifetime Warranty
IIRB610 – Rev. 012907 F21U
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>