Luminii LETO-4 Dry Indoor Locations Light Instruction Manual
- June 1, 2024
- luminii
Table of Contents
Luminii LETO-4 Dry Indoor Locations Light Instruction Manual
Overview
Mounting Surface
Please make sure the mounting surface is strong enough to hold at least 0.88lb (0.4kg).
Ceiling Thickness
Ceiling thickness must be between 1/4” & 1” (6mm & 25mm). If the thickness of
the ceiling is thinner than 1/4” (6mm), use an #6-32 screw to set fixture in
place.
Read and follow these
instructions before installing or maintaining this product.
- This product is suitable for DRY INDOOR LOCATIONS ONLY.
- Make sure this product is NOT on the same circuit as inductive loads, (e.g. fluorescent bulbs, discharge bulbs, ventilation fans, etc…).
- Allow air to flow freely around the fixture.
- Do not switch on line voltage until all wiring is complete.
- Incorrect wiring will result in irreparable damage to LED and power supply.
- This product should only be installed by a licensed electrician.
Warranty
- This product must be installed in accordance with all applicable installation codes and ordinance.
- Limited five (5) years warranty.
- Warranty is void in the eventuality of unauthorized modifications and/or improper use.
Choose Installation Type
Housing Installation
Install appropriate housing between ceiling joists. Connect the driver to the
line voltage and ground to enclosure.
Finish ceiling installation. Make sure hole is cut to appropriate size and
location.
Retrofit & Non Fixed Driver Installation
-
Ensure wire reaches fixture location.
-
Finish ceiling installation. Make sure hole is cut to appropriate size and location.
Connect the driver to the line voltage and ground to enclosure.
-
Connect the driver to the line voltage and ground to enclosure. Push driver into ceiling.
-
Ensure power is off. Lower quick connect wire from ceiling and connect to fixture until you hear a click
-
Compress the 3 springs inward until they clear the hole in ceiling.
-
Rotate fixture to desired orientation. Push it into hole until springs release and fixture is flush with ceiling.
Do not scale this when printing
this template.
4 Rev May 3, 2023 403-216-7043 info@sensolighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>