AUXBEAM QP009631 9 Inch LED Headlights Instruction Manual

9INCH LED HEADLIGHTS & 4INCH FOG LIGHTS
INSTRUCTION MANUAL

Introductions & Tips

Thank you for purchasing our headlight products. This guide will provide you with detailed steps and tips to make the installation process easy and enjoyable. Before starting the installation, it is important to ensure your personal safety and complete the installation efficiently.

1. This manual is applicable to the following three products: QP009631 HEADLIGHT/FOG KIT, QP009524 HEADLCHTS, QP006349 FOG LGHTS.
2. Read the instructions: Before starting the installation, please be sure to read the entire installation manual carefully. Familiarize yourself with the steps and requirements to avoid misuse.
3. Avoid risks involved: If you do not have the necessary skills or experience, or are not familiar with automotive electrical systems, it is recommended that you ask professional technicians to assist in the installation to avoid potential risks.
4. Consult in time if you have any questions: If you encounter problems during the installation process, please feel free to contact our customer support team. Don’t hesitate, we are here to help you.

Package List QP009631 INCIUDES:

• 2x 9inch Headlights
• 2x 4inch Fog Lights
• 4x 15mm Springs
• 6x Hex Socket Screws
• 2X 9005 Female To H13 Male Adapter
• 2x 9005 Female Adapter
• 4x External Wires
• 2x Brackets For Modified Steel Bumper
• 2x Brackets For Plastic Bumper
• 8x T-Tap Connector

QP009524 INCIUDES:

• 2x 9inch Headlights
• 4x 15mm Springs
• 6x Hex Socket Screws
• 2x External Wires
• 4x 15mm Springs
• 4x T-Tap Connector

QP006349 INCIUDES:

• 2x 4inch Fog lights
• 2x 9005 Female To H
• 13 Male Adapter
• 2x 9005 Female Adapter
• 4x T-Tap Connector

Lighting Effects

Installation Steps

NOTE: If you purchased QP009631 HEADLIGHT/FOG KIT, please refer to steps 1-11. QP009524 HEADLCHTS please refer to steps 1-7 and QP006349 FOG LGHTS please start directly from step 9.
Tools required: Flat Head Screw Driver or Nylon Panel Removal Tool 10mm Socket, Ratchet/Drill and Ratchet external 10mm and 13mm Wrenches.

1. Open the hood of your car. Remove the grill by taking out the 6 push pins using a flat head screwdriver or panel popper.

2. Next remove the stock headlights held in with 3 bolts on each light, using a socket. Unplug the stock headlights by pushing the backside connector tab on the wiring harness with your thumb.

3. Plug in both the provided headlight wire plugs and the factory headlight sockets and reinstall your new LED JL headlights into your vehicle. Re-use the 3 mounting screw sand connect the new headlight connector into the stock JL headlight connector. If  ot wiring up DRL or amber turn signals you can proceed to step 7. If you plan to use the DRL or amber turn signals lights, run the DRL and amber turn signal wires into the fender area and back towards the firewall by using the provided external wires (refer to wiring diagram).

4. Now you need to locate the stock fender connector on each side. Remove the ground wires from the fender next to the battery on passengers side. Remove the nut next to it holding them to the fender (be very careful not to drop the nuts). Move the ground wires out of the way to access the front fender harness. It is located directly below the ground bolts.

5. Pull the fender liner back to gain access to the DRL/side marker bracket. Remove the bolts and loosen the two bolts holding the bracket in place. Locate the stock JL Fender Wire Harness connector.

6. Pull back wheel liner, we can see factory fender lights wires. Refer to wiring diagram, on the left drivers side, the WHITE-GREEN wire is for turn signal
   light, the WHITE-YELLOW one is for daytime running light. On the right passengers side, the WHITE-BEIGE wire is for turn signal light, the WHITE-DARK BLUE one is for daytime running light. Using T-tap connectors and external wires, connect the yellow external wires of the new LED headlights to the factory turn signal wires and connect the white external wires to the factory daytime running light wire.

7. Test all functions of the new LED headlights, reinstall the black box with the 10mm bolts back on the fender.

8. Make sure the beam locations not too high up and potentially blinding oncoming traffic, reinstall the grille and secure it with the original push rivets.

9. Fog lights installation: First, remove the bumper. And then disconnect the stock fog light power connector, remove your stock JL fog lights. Reinstall your new LED fog lights. Determine which brackets you will need below. Run the DRL and Amber Turn signal wires into the fender area. Please note our JL fog lights can NOT be installed on the 10th Anniversary bumper, please make sure before purchasing, thanks! 3 Base Fitment list
   2018-2022 Jeep Wrangler JL JLU Wrangler 4xe Sport and Sport S model, Wrangler JL Sport Sahara and the Rubicon with factory Plastic bumper Sahara or Rubicon Wrangler JL with OEM plastic bumperAftermarket bumpers using the OEM “4 Bolt” mounting style location

10. Refer to wiring diagram, connect DRL wire (white external wire) and turn signal wire (yellow external wire) on your new LED fog lights to the JL factory fender wire harness by using T-tap connectors. On the left drivers side, the WHITE-GREEN wire is for the turn signal light, the WHITE-YELLOW one is for DRL; On the right passengers side, the WHITE-BEIGE wire is for the turn signal light, the WHITE-DARK BLUE one is for DRL.

11. Turn on the new fog lights while holding the lamp in place. Rotate the adjustment screw (clockwise to raise, counterclockwise to lower) on the rear of the lamp to aim the light like the existing fog light. When the existing and new fog light horizon lines are aligned, re-torque all bolts of fog lights.

Wiring Diagram
Your factory fender lights wires may be a different configuration than the one used in this instruction guide. Below are the wiring configurations of 5 wires for stock headlights are led and 6 wires for stock headlights are halogen. Thus, your installation or wiring may differ. You can use a multi-meter or consult your model’s wiring diagram to ensure proper function.
6 Wires for Stock Headlights are halogen Wiring Diagram(Note: wire colors may vary)6 Wires for Stock Headlights are Halogen Left Driver Side

6 Wires for Stock Headlights are Halogen Right Passenger Side

5 Wires for Stock Headlights are LED Wiring Diagram (Note: wire colors may vary)5 Wires for Stock Headlights are LED Left Driver Side

5 Wires for Stock Headlights are LED Right Passenger Side

Cautions
Cautions
Read all safety messages and understand all instructions before attempting to install this product. Always wear safety glasses during install.
Quick Feedback
If You Meet Some Problems, Please Contact Our Customer Service for Quick Help.
Method 1: Scan QR code to obtain supporting.

Method 2:Email contact AUXBEAM Customer Service:
 CUSTOMER@AUXBEAM.COM https://auxbeam.com/pages/auxbeam-warranty- submission

Documents / Resources

| AUXBEAM QP009631 9 Inch LED Headlights [pdf] Instruction Manual
QP009631, QP009524, QP006349, QP009631 9 Inch LED Headlights, QP009631, 9 Inch LED Headlights, LED Headlights, Headlights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>