AUXBEAM Emergency Rooftop Strobe Flashing Light Bar User Manual
- June 1, 2024
- AUXBEAM
Table of Contents
AUXBEAM Emergency Rooftop Strobe Flashing Light Bar
Product Information
Specifications
- EMERGENCY STROBE LIGHT BAR
- Available Sizes: 17 Inch, 21.5 Inch, 31.5 Inch, 38.5 Inch, 47 Inch
- Control Methods: Button Control (17 Inch), Switch Panel A (21.5 & 31.5 Inch), Switch Panel B (38.5 & 47 Inch)
- Power Options: Cigarette Adapter (17 & 21.5 Inch), Power Line Access Battery (31.5, 38.5, 47 Inch)
Product Usage Instructions
LED Rooftop Strobe Light Bar
Product Display: Available in various sizes.
Control Method Instructions:
- Button Control for 17 Inch
- Switch Panel A for 21.5 & 31.5 Inch
- Switch Panel B for 38.5 & 47 Inch
Installation Instructions
Bracket Installation (31.5, 38.5, 47 Inch):
- Insert the bolt into the short bracket and then into the bottom holes of the light bar.
- Secure tightly with a nut.
- Fix the long bracket in the gap at the top of the car door.
- Insert bolts into overlapping holes of the two brackets and add nuts to hold the light bar firmly on the vehicle.
Magnet Installation (17, 21.5 Inch): Attach directly to the car roof.
Wiring Instructions:
- Cigarette Adapter for 17 & 21.5 Inch
- Power Line Access Battery for 31.5, 38.5, 47 Inch (Black Cable for Negative, Red Cable for Positive)
Dual Visor Strobe Light Bar
Product Display:
Installation Instructions:
- Determine the best location on the vehicle visor.
- Clean the surface to remove dirt and debris.
- Attach suction cups to the light bar and press firmly onto the visor.
Dual Windshield Dash Strobe Light Bar
Product Display:
Installation Instructions:
- Determine the best location on the windshield.
- Clean the area with water and dry it.
- Attach suction cups to the light bar and press firmly onto the windshield.
Dual Traffic Advisor Light Bar
Product Display:
Installation Instructions:
- Determine the best location on the windshield.
- Clean the area with water and dry it.
- Attach suction cups to the light bar and press firmly onto the windshield.
Frequently Asked Questions (FAQ)
-
How do I power the Emergency Strobe Light Bar?
The smaller sizes (17 & 21.5 Inch) can be powered using a cigarette adapter, while the larger sizes (31.5, 38.5, 47 Inch) require access to the vehicle’s battery using specific wiring instructions provided. -
Can I install the light bar on any vehicle?
The light bars are designed for easy installation on most vehicles, but always ensure compatibility and appropriate mounting locations before installation. -
Can I adjust the strobe patterns of the light bar?
The strobe patterns may vary depending on the specific model and control method. Refer to the user manual for instructions on adjusting strobe patterns if applicable.
LED ROOFTOP STROBE
PRODUCT DISPLAY
CONTROL METHOD INSTRUCTIONS
- BUTTON CONTROL (17 Inch)
1. Lighted power switch to turn on and off
2. To change between 23 different patterns- SWITCH PANEL A (21.5 & 31.5 Inch)
- Pattern Display
- Quick-select Directional Buttons
- Save Your Favorite Pattern
- On/Off(with memory function)
- Previous Mode Select Button / Next Mode Select Button
- Alternate Flashing Button
- Auto Cycle Mode Button(from 1-20 patterns)
- SWITCH PANEL B (38.5 & 47 Inch)
1. Pattern Display
2. Quick-select Directional Buttons
3. Save Your Favorite Pattern
4. On/Off (with memory function)
5. Pause Flash (Take down & Alley function is not affected)
6. Select Pattern Button
7. Steady White Light Front and Back
8. Steady White Light Both SidesINSTALLATION INSTRUCTIONS
- BRACKET INSTALLATION (31.5 &38.5&47 Inch)
1. Insert the bolt into the short bracket, then insert it into the bottom holes of the light bar.
2. Secure them tightly with a nut.
3. Fix the long bracket in the gap at the top of the car door.
4. Insert the bolts into the overla-pping holes of the two brackets.
5. Add the nut to hold the light bar on the vehicle firmly.- MAGNET INSTALLATION (17 &21.5 Inch)
Attach the strobe light bar directly to the roof of the car.
WIRING INSTRUCTIONS
- CIGARETTE ADAPTER (17 &21.5 Inch)
- POWER LINE ACCESS BATTERY
(31.5&38.5&47 Inch)
DUAL VISOR STROBE
PRODUCT DISPLAY
CONTROL METHOD INSTRUCTIONS
- Pattern Display
- Quick-select Directional Buttons
- Save Your Favorite Pattern
- On/Off(with memory function)
- Previous Mode Select Button / Next Mode Select Button
- Alternate Flashing Button
- Auto Cycle Mode Button (from 1-20 patterns)
INSTALLATION INSTRUCTIONS
- Determine the best location for the light bar on vehicle visor.
- Clean the surface of the vehicle visor to ensure that it is free of any dirt or debris.
- Attach the suction cups to the light bar.
- Place the light bar on the vehicle visor and press it firmly.
- Connect the cigarette adapter harness to your vehicle’s electrical system.
DUAL WINDSHIELD DASH STROBE
PRODUCT DISPLAY
CONTROL METHOD INSTRUCTIONS
- Pattern Display
- Quick-select Directional Buttons
- Save Your Favorite Pattern
- On/Off(with memory function)
- Previous Mode Select Button / Next Mode Select Button
- Alternate Flashing Button
- Auto Cycle Mode Button (from 1-20 patterns)
INSTALLATION INSTRUCTIONS
- Determine the best location for the light bar on your windshield.
- Clean the area where you plan to install the light bar with water and dry it with a rag.
- Attach the suction cups to the light bar.
- Place the light bar onto the windshield and press down firmly.
- Connect the cigarette adapter harness to your vehicle’s electrical system.
DUAL TRAFFIC ADVISOR
PRODUCT DISPLAY
CONTROL METHOD INSTRUCTIONS
- Pattern Display
- Quick-select Directional Buttons
- Save Your Favorite Pattern
- On/Off(with memory function)
- Previous Mode Select Button / Next Mode Select Button
- Alternate Flashing Button
- Auto Cycle Mode Button (from 1-20 patterns)
INSTALLATION INSTRUCTIONS
- Determine the best location for the light bar on your windshield.
- Clean the area where you plan to install the light bar with water and dry it with a rag.
- Attach the suction cups to the light bar.
- Place the light bar onto the windshield and press down firmly.
- Connect the cigarette adapter harness to your vehicle’s electrical system.
CUSTOMER SERVICE
SCAN QR CODE TO OBTAIN SUPPORTING
CUSTOMER@AUXBEAM.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>