AR-800 DIY Custom Switch Labels For Auxbeam Switch Owner’s Manual
- June 16, 2024
- AUXBEAM
Table of Contents
AR-800 DIY Custom Switch Labels For Auxbeam Switch
Specifications
- Product: Auxbeam Switch Panel
- Compatibility: BA80, GA80, BB80, GB80, BC60, GC60, AR-800, RA80 XL, AR-600
- Label Options: Auxbeam labels and custom labels
- Label Material: Adhesive-backed white labels
- Label Protection: Matte Scotch tape
- Label Application: Self-stick label stock
- Brightness: Custom labels are slightly brighter than Auxbeam labels
INSTRUCTION
Making Custom Switch Labels for your Auxbeam Switch Panel
If you need to control an accessory for which Auxbeam doesn’t provide a
switch label, making custom labels is very easy – custom labels could be
created with a drawing program. DIY labels can be printed on adhesive-backed
white labels from an office supply store. The labels pictured below are custom
– left to right – spotlight, AC inverter power, USB outlet power, sink pump
and main power for a Trail Kitchen.
Custom switch labels can be printed on white self-stick label stock, available
at any office supply store. After printing the custom label on the label
stock, cover the label with matte Scotch tape and then cut the label to size
from the larger piece of label stock.
Once the label is protected with tape and cut to from the larger piece of
label stock, it can be applied to the switch panel in the same way that the
Auxbeam labels are applied.
In this next photo, the top row of labels came with the product and the bottom
row of labels are custom:
When the switch panel is illuminated, the custom labels are a little brighter than the Auxbeam labels. You may like the extra brightness better, but if you’d like them to be the same brightness as the Auxbeam labels you can use a double layer of the label stock too so less light passes through the custom label.
- Auxbeam 120pcs stickers for BA80, GA80, BB80, GB80, BC60, GC60, AR-800: https://www.amazon.com/dp/B0BG24GMWT
- Auxbeam 120pcs stickers for RA80 XL, AR-600: https://www.amazon.com/dp/B0C13FPNP1
Source: Auxbeam website
FAQ
(Frequently Asked Questions)
- Q: Where can I find Auxbeam stickers for specific models?
- A: You can find Auxbeam stickers for BA80, GA80, BB80, GB80, BC60, GC60, AR-800 on Amazon at this link: Auxbeam Stickers for BA80, GA80, BB80, GB80, BC60, GC60, AR-800. For RA80 XL and AR-600 models, you can find stickers on Amazon at this link: Auxbeam Stickers for RA80 XL, AR-600.
- Q: Can I use other types of labels for custom switch labels?
- A: It is recommended to use adhesive-backed white labels available at any office supply store. These labels provide optimal adhesion and durability for the switch panel.
- Q: How do I clean the surface of the switch panel?
- A: To clean the surface of the switch panel, use a mild soap solution and a soft cloth. Gently wipe the surface to remove any dirt or residue. Ensure the panel is completely dry before applying the custom label.
References
- Auxbeam Switch Panel Sticker for 6/8 Gang Switch Panel Label Decal for Circuit Panel Marine Boat Truck Camper Dashboard Switch Control Labels, 120PCS : Automotive
- Auxbeam Switch Panel Stickers for RA80 XL RB80 XL AR-600 AC-1200 120Pcs 6/8/12 Gang Switch Panel Label, 1" Larger DIY Decals for Car RV Camper Van Truck Marine Boat : Automotive