SEACHOICE 19473 Live Bait Aerator Kit Owner’s Manual

SEACHOICE 19473 Live Bait Aerator Kit

Product Specifications

• Model: Live Bait Aerator Kit
• Part Number: 19473
• Dimensions: 4.35in (110.6mm) x 14in (360mm) x 5.95in (142mm)
• Kit Includes:
  • 350 GPH pump
  • Suction cup base
  • Battery clips
  • Aerator tube
  • Adjustable spray head
• Features:
  • Aerates any portable livewell/baitwell bucket or cooler
  • Fully adjustable spray head to control water flow rate
  • Efficiently moves water and oxygen into livewell tanks to keep fish active
  • Cooler-running motors, premium materials, watertight seals, and waterproof wiring for durability

Product Usage Instructions

Installation

• Clean the surface where the pump suction cups will be placed.
• Press the pump suction cups firmly in place.
• Adjust or remove the spray tube if necessary.
• Connect the battery clips to the battery; use 18-gauge wire for additional lengths.
• For installations over 20 feet, use 14-gauge wire.
• Ensure all wire connections are waterproof and kept out of the water.
• Attach the black lead (negative) to the negative side of the battery and the brown lead (positive) to the positive side of the battery.
• Install a 2.0 amp fuse in the positive lead close to the battery.

FAQ (Frequently Asked Questions)

• Q: Can this pump be used with substances other than fresh and salt water?
  A: No, using the pump with any other medium could cause damage to the pump and may pose risks to individuals and property.

• Q: How do I adjust the water flow rate?
  A: The spray head on the aerator tube is fully adjustable to control the rate of water flow.

Live Bait Aerator Kit Manual

KIT INCLUDES
350 GPH pump / Suction cup base
Battery clips / Aerator tube
Adjustable spray head

FEATURES

• Aerates any portable livewell / baitwell bucket or cooler.
• A fully adjustable spray head to set the rate of water flow.
• Move more water and oxygen into livewell tanks to keep fish active.
• Cooler-running motors, premium materials, watertight seals and waterproof wiring.

WARNING
This pump is designed for use with fresh and salt water. Use with any other medium, including particularly hazardous, caustic or corrosive substance, could result in damage to the pump, the surrounding environment and injury to persons or property, including possible exposure to hazardous substances.

INSTALLATION

1. Clean surface of sand, grease, etc and press pump suction cups firmly in place.
2. Spray tube may be removed and shortened if necessary.
3. If battery is close enough, clip wires to the battery with the battery clips provided. If additional lengths of wire are needed, use 18 gauge wire. On installation over 20 feet, use 14 gauge wire. Make sure all wire connections are completely waterproof, and out the water.
4. The black lead is negative (-). Attach the black lead to the negative (-) side of the battery. The brown lead to the positive (+) side of the battery. Install a 2.0 amp fuse in the positive (+) lead as close to the battery as possible.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>