AUXBEAM H4651 Series 4×6 LED Headlights Rectangular Headlamps Instruction Manual

AUXBEAM H4651 Series 4×6 LED Headlights Rectangular Headlamps

Product Information

Specifications

• Model: XBBEEAAAAUMUM
• Color: Silver
• Material: Metal and Plastic
• Power Source: Battery-operated
• Dimensions: 10cm x 5cm x 3cm

Product Usage Instructions

Step 1: Power On/Off

To power on the device, slide the power switch to the ON position. To power off, slide the switch to the OFF position.

Step 2: Setting Up

Follow the on-screen instructions to set up the device for first-time use. This may include language selection, date/time setup, etc.

Step 3: Functionality

Use the buttons on the device to navigate through different modes and settings. Refer to the user manual for specific functions of each button.

Step 4: Maintenance

Regularly clean the device with a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or solvents.

FAQ

• Q: How do I replace the batteries?
  • A: To replace the batteries, open the battery compartment located on the back of the device and replace with new batteries following the polarity markings.
• Q: Can I use this product in extreme temperatures?
  • A: It is recommended to avoid using the product in extreme hot or cold temperatures as it may affect performance.

Connection of wiring harness

TIPS: Some products do not have this function, please refer to the information on the Amazon detail page.

H4 to 3 Pins Wire Harness Wiring Diagrams

Lighting Effect

Installation

Installation Steps (To Exemplify)

1. Turn off the engine, disconnect the battery and carefully remove the front grille.
2. Remove the existing headlights from the bumper and keep all hardware that attaches the headlights to the vehicle.
3. Unplug the connector of the existing headlight.
4. Plug in the headlight H4 plugs. Tap wire to the positive of DRL and turn signal light on both sides(IF ANY).
5. Test these lights to make sure they work well before you put back the hardware.
6. Install fixing screws and the existing hardware.

How to remove the moisture in the headlights

1. Remove the headlights and open the vent valve on the back cover, with the front panel facing down and the cover facing up.
2. Turn on the light for half an hour to remove the moisture.
3. After removing the moisture, cover the vent valve back and install it back in your car.

CAUTION

• READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL THIS PRODUCT.
• ALWAYS WEAR SAFETY GLASSES DURING INSTALL.

QUICK FEEDBACK

IF YOU MEET SOME PROBLEMS, PLEASE CONTACT OUR CUSTOMER SERVICE FOR QUICK HELP.

• Method 1:
  • Scan the QR code to obtain support.
• Method 2:
• Email contact AUXBEAM Customer Service.
  • [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>