AUXBEAM H5054 5×7 LED Headlights High Low Beam Led Sealed Beam Headlamp with DRL Angle User Manual
- June 1, 2024
- AUXBEAM
Table of Contents
H5054 5×7 LED Headlights High Low Beam
Led Sealed Beam Headlamp with DRL Angle
User Manual
LED Headlights 5×7″7×6″
H5054 5×7 LED Headlights High Low Beam Led Sealed Beam Headlamp with DRL
Angle
SCAN QR CODE TO OBTAIN SUPPORTING CUSTOMER@AUXBEAM.COM
H4 TO 3 PINS ADAPTER WIRING DIAGRAMS
The pins on the headlight may be different to some old vehicles, you may need
to swap the pins. Here below are the pins out types:
LIGHTING EFFECT
INSTALLATION STEPS
- Turn Off the engine, disconnect the battery and carefully remove the existing headlights from the grille on the driver side.
- Unplug the connector of the existing headlight.
- Replace it with new LED headlight. Some vehicles require the use of H4 to 3-pin adapter. (Package included)
- Lay and secure wires to avoid damaging the wires or light. Install the headlight with the existing hardware into the light housing.
- Install the headlight with the existing hardware into the light housing. Test the function of the headlight.
- Repeat the steps 1-5 on the passenger side, once the headlights have worked properly, reinstall all hardware.
TIPS
- Personal safety first: Safety always comes first. During the installation process, please ensure your personal safety. If you need to work under a vehicle, make sure you use proper support and safety equipment to avoid injury.
- Read the instructions: Before starting the installation, please be sure to read the entire installation manual carefully. Familiarize yourself with the steps and require- ments to avoid misuse.
- Avoid risks involved: If you do not have the necessary skills or experience, or are not familiar with automotive electrical systems, it is recommended that you ask profession- al technicians to assist in the installation to avoid potential risks.
- Check and test: After the installation is complete, be sure to check all connections to ensure that the product has been installed correctly. Before the actual drive, test to make sure everything is working properly.
- Consult in time if you have any questions: If you encounter problems during the installation process, please feel free to contact our customer support team. Don’t hesitate, we are here to help you.
LED HEADLIGHT
WIRING DIAGRAM
AUXBEAM
BRAND INTRODUCTION
Founded in 2008, Auxbeam strives every day to share our enjoyment of open-air,
off-road adventure with as many people as possible. Today, Auxbeam has
achieved a leading market position on account of affordable price and updated
excellent quality products, high standards of manufacturing and superior
customer service.
Nowadays…
Auxbeam focuses on providing all types of cost-effective outdoor auto spare
parts in special design styles to meet different customers’ needs. We offer a
wide variety of items, including auto parts & accessories, LED lights, switch
panels and so on.
QUESTIONS & ANSWERS
Q: WHAT SHOULD I DO IF MY HEADLIGHTS ARE FLICKERING AFTER INSTALLATION?
A: The potential causes of headlight flickering include loose wiring, faulty
alternators, dimming switch problems, voltage regulator malfunctions, emc
error and bulb issues. Simple issues like loose wiring can be addressed by
yourself. The other issues can usually solved by installing a driver/load
resistor/LED decoder with your LED headlights. And you can also use an anti-
flicker adaptor and warning cancelers to address this problem. If the problem
persists after taking the above measures, please contact us promptly to
replace the LED headlights for you.
Q: WHY DOES TURNING ON THE HEADLIGHTS CAUSE I INTERFERENCE WITH THE AUDIO
EQUIPMENT IN THE CAR?
A: This situation is more likely to occur in older car models. It is because
the installation of new LED headlights has caused electromagnetic interference
to the audio equipment (radio, CD player, etc.) in the car. In this situation,
you can buy an anti-interference magnetic ring to solve it.
Q: HOW TO REMOVE THE MOISTURE IN THE HEADLIGHTS?
A: First, remove the headlights and open the vent valve on the back cover,
with the front panel facing down and the cover facing up. Second, turn on the
light for half an hour to remove the moisture. Third, after removing the
moisture, cover the vent valve back and install it back in your car.
CAUTIONS
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS BEFORE ATTEMPTING TO
INSTALL THIS PRODUCT.
ALWAYS WEAR SAFETY GLASSES DURING INSTALL.
THANK .YOU
FOR CHOOSING
AUXBEAM’S PRODUCTS
https://auxbeam.com/pages/auxbeam-warranty-submission
If you have any questions, please to contact our customer service. CUSTOMER@AUXBEAM.COM
www.facebook.com/auxbeam
www.instagram.com/auxbeamledlight
www.youtube.com/@)AuxbeamAuxbeam)
****www.auxbeam.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>