DOMUS LINE 3480900 X-Driver Lightning System Installation Guide
- June 4, 2024
- DOMUS LINE
Table of Contents
- DOMUS LINE 3480900 X-Driver Lightning System
- Specifications
- Optional Accessories Table
- INSTRUCTION MANUAL SERIES: X-DRIVER 15-30-60Watt
- IR-XD LSW & IR-XD Dsw
- PIR XD
- Remote Control matched transmitter
- Reset matched transmitter
- Remote control Function
- SEARCH FOR DEVICES
- INTRODUCTION
- WARRANTY
- IC warning
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DOMUS LINE 3480900 X-Driver Lightning System
- The device is in insulation class II. Connection to the earthing circuit is not necessary.
- Lamp power supply unit thermally protected at 110°C
Specifications
| X-DRIVER 15Watt| X-DRIVER 30Watt| X-DRIVER 60Watt
---|---|---|---
Input voltage
| 100-120VAC,220-240Vac
(100-120VAC for North America only)
Input frequency| 50/60Hz
Input current| 0,25A for 100-120Vac
0,12A for 220-240Vac
| 0,40A for 100-120Vac
0,20A for 220-240Vac
| 0,35A for 100-120Vac
0,80A for 220-240Vac
Output voltage| 12-24Vdc| 12-24Vdc| 12-24Vdc
Rated output power| 0-15W| 0-30W| 0-60W
Dimming range| 2%-100%
Operation mode| PWM+PFM
Ambient temperature| -20…+40°C
IP protection| IP20
Optional Accessories Table
INSTRUCTION MANUAL SERIES: X-DRIVER 15-30-60Watt
IR-XD LSW & IR-XD Dsw
PIR XD
Remote Control matched transmitter
Reset matched transmitter
Remote control Function
App. DOMUS 4U
Enter the APP, press Info, and read the instructions. DOMUS 4U can control max. 5 X-DRIVER
SEARCH FOR DEVICES
With the DOMUS4U application that uses the LE Bluetooth technology of your device to search for all the Domus Line X-DRIVER devices in your home, you can switch on, switch off or adjust the brightness or light color of the devices connected to it with just a simple touch. After selecting the devices, you will be able to store them and rename them however you like (for example, Kitchen lights, Bathroom lights, and so forth).
WARNING
Safety is guaranteed if these instructions are followed and therefore they
must be kept. Installation may require the involvement of qualified personnel.
Before proceeding with the installation of the device ensure that the
environmental conditions are in compliance with and suitable for the product
characteristics. Before any operation on the device disconnect the main power.
INTRODUCTION
The power supply is designed exclusively for LED lamps. It can be used together with control modules, IR/ PIR sensors, remote control remote controls, and APP (see options l table accessories). The built-in protection circuit turns off the power supply when there is a short circuit, overload, or overheating. X-DRIVER restarts automatically after the problem has been resolved.
WARRANTY
The warranty on the device is valid on l y if powered by a power supply provided by DOM US Line. The warranty’s genera l terms and conditions for th i s device are available at www.domusline.comThis device complies with part 15 of lhe FCCRules. Operation is subject lol the following two conditions: (1) This device may nol cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.
FCC warn i ng : Any changes or modifications not expressly approved by lhe party responsible for compliance could void the user’s authority to operate lhe equipment.
Note: This equipment has been leveled and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and receiver.
- Connect lhe equipment into an outlet on a circuit different from that to which
- the receiver is connected.
- Consulllhe dealer or an experienced radio/TV technician for help.
IC warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to lhe following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipmenl complies with FCC radialion exposure limils sel forth for an unconlrolled environment This equipmenl should be inslalled and operaled wilhminimum dislance 20cmbelween the radialor & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>