mitoredlight Advanced Red Light Therapy Belt Flexible Device User Manual

: June 11, 2024
: mitoredlight

mitoredlight Advanced Red Light Therapy Belt Flexible Device User Manual

How does red light therapy work?

Red and near-infrared light are part of the electromagnetic spectrum, and more specifically, part of the spectrum of light emitted by the sun. These wavelengths of light are “bioactive” in humans

The specific photons found in red and near infrared light interact with a photoreceptor within our cells called cytochrome c oxidase. This interacts on mutates the mitochondria in our cells to use oxygen more efficiently, which allows the mitochondria to produce more ATP (adenosine triphosphate). Adenosine triphosphate is a complex organic chemical that provides energy to drive many processes in living cells, e.g. muscle contract on, nerve impulse propagate on, and chemical synthesis. Found in all forms of life, ATP is even referred to as the “molecular unit of currency” of intracellular energy transfer. When our cells have more energy, they simply perform better and the body follows suit!

User guidance for all devices

Indications for Use
Mito Red Lights are general wellness devices and are not intended to cure or diagnose any medical conditions. Use of this device is designed to help promote overall health and wellness by supporting cellular function. Mito Red Lights should only be operated based on the user guidelines, as outlined in this user manual.

First Time Users
For first time users, we recommend starting out with 4-5 minute treatments per area, and slowly working up to a 10-15 minute session over the course of 2-3 weeks as your body acclimates to the therapy.

Standard Use
We recommend 10 to 15 minute treatments. per area. Additional 10- minute sessions for specific areas may be beneficial but beyond a certain point, the scientific evidence points to diminishing returns. More is not always better.

For this reason, we recommend you allow at least 6 hours between treatments of the same area. We recommend no more than 30 minutes in any one session. We recommend using the device 4-10 times per week. We recommend taking at least one day off per week.

ADVANCED THERAPYBELT

Package contents

This package includes

Advanced therapy belt
Battery pack
Battery charger
USB adapter
Controller
Jumper cable
Carrier pouch
User manual

User Instructions

Powering The Light Therapy Belt With The Wall Adapter

Connect the male end of the remote control cable to the DC power port attached to the light therapy belt.
Connect the wall power adapter to the female end of the remote control cable.
Plug the power adapter into a standard wall outlet.
Use the remote control to power the belt on and off by holding the button down for 3 seconds.
Once the session is finished, remove power adapter out of the wall outlet.

Powering The Light Therapy Belt With the External Battery

The light therapy belt comes with a 5V external power bank. This option will allow you to power the light therapy belt with the external battery. The battery can be charged using the USB cable:

Connect the male end of the remote control cable to the DC power port attached to the light therapy belt.
Connect the skinny male plug from the jumper cable into the port on the battery pack, then connect the other larger male end into the emotes female port.
To power on the belt, press the power button on the side of the power bank once and hold down the power button down on the remote control for 3 seconds to turn on the belt.
Place the battery in the pocket at the front of the belt during use.
To power off the belt hold the power button on the remote for 3 seconds and then hold the power button on the battery pack for 3 seconds to power off the power bank.

Remote Instructions

Using The Control Panel

Intensity Options
There are five different intensity settings. We recommend starting with a lower setting, and work your way up to the intensity level that is comfortable for you.

Timer Options
Start at 5 minutes as the controller goes in 5 minute increments.
Remote Instructions

QUAD BELT

Package contents

This package includes

Quad belt
Battery pack
Battery charger
USB adapter
Controller
Jumper cable
Carrier pouch
User manual

User Instructions

Powering The Light Therapy Belt With the External Battery

The light therapy belt comes with a 5V external power bank. This option will allow you to power the light therapy belt with the external battery. The battery can be charged using the USB cable:

Connect the male end of the remote control cable to the DC power port attached to the light therapy belt.
Connect the skinny male plug from the jumper cable into the port on the battery pack, then connect the other larger male end into the remotes female port.
To power on the belt, press the power button on the side of the power bank once and hold down the power button down on the remote control for 3 seconds to turn on the belt.
Place the battery in the pocket at the front of the belt during use.
To power off the belt hold the power button on the remote for 3 seconds and then hold the power button on the battery pack for 3 seconds to power off the power bank.

Remote instructions

Using The Remote Control

Brightness Option
The Brightness setting allows you to control brightness from 1 -100 % We recommend starting with a lower brightness, and work your way up to the intensity level that is comfortable for you.

Timer Options
Control your session time from 1 – 30 minutes. Controller goes in 1 minute increments.
Remote instructions

FULL BODY MAT

Package contents

This package includes

Full body mat
Controller
Power supply brick
Power cord
Carrier pouch
User manual

User instructions

Powering The Full Body Mat

Connect the male end of the remote cord into the cord that is attached to the Red light Mat. Be sure to line up the slot of both sides. Once attached press firmly and tighten middle wheel.
Connect the female end of the remote cord into power adapter cord. Be sure to line up the slot of both sides. Once attached press firmly and tighten middle wheel.
Plug the power adapter into a standard wall outlet.

Remote instructions

Using The Remote Control

Brightness Option
The Brightness setting allows you to control brightness from 1 -100 % We recommend starting with a lower brightness, and work your way up to the intensity level that is comfortable for you.

Timer Options
Control your session time from 1 – 30 minutes. Controller goes in 1 minute increments.
Remote instructions

Cautions & Disclaimer

DO NOT expose to running water. If your light comes into contact or becomes submerged into water or other liquid, unplug it immediately from the electrical power outlet. If it is to be used in the vicinity of water, we recommend using an electrical outlet protected by Ground Fault Circuit Interrupter (GFCI).
DO NOT directly touch the light or touch the plugs or switches with wet hands.
DO NOT apply or touch the light to, or with, wet or damp skin.
DO NOT pull, carry, or lift the light by its cord. If the cord is damaged, don’t use the light.
DO NOT use on or near heated surfaces.}
DO NOT operate this light in areas where it could be exposed to flammable or combustible products or vapors. Explosion or fire may occur.
DO NOT store or use your device in hot temperatures exceeding 120 degrees Fahrenheit.
DO NOT use your light if it is damaged. Continuous use of a damaged light may result in electric shock or injury.
DO NOT use extension cords unless they are designed to carry the total wattage of the light being powered.
DO NOT unplug by pulling directly on the cord. Grasp the plug itself, not the cord, when unplugging from an outlet.

Specifications

ADVANCED RED LIGHT THERAPY BELT
Battery Capacity: 15,000 mAh
50/50 split Red / NIR
LEDs: 405 diodes with 3 chips per diode = 1,215 LED chips per belt!
Wavelengths: 660nm (Red) & 850nm (NIR)
Intensity: 5 intensity levels to choose from.
Power Input: 120V (can be used internationally w/ plug adapter)
Charge Power Output: 12V
Weight: 1.5 pounds
Dimensions: 48″x7″
Treatment area dimensions: 21″ x 5″
1 Year Warranty
Runs 2-6 hours on a single charge (depending on intensity level selected)
QUAD WAVELENGTH BELT
Battery Capacity: 15,000 mAh
67% NIR, 33% Red
LEDs: 405 diodes with 3 chips per diode = 1,215 LED chips per belt!
Wavelengths: 630nm, 660nm (Red) & 810nm, 850nm (NIR)
Brightness: 1%-100%
Power Input: 120V (can be used internationally w/ plug adapter)
Charge Power Output: 12V
Weight: 1.5 pounds
Dimensions: 52″x7″
Treatment area dimensions: 22″ x 6″
1 Year Warranty
Runs 2-6 hours on a single charge (depending on intensity level selected)
FULL BODY MAT
50/50 split Red / NIR
LEDs: 1,280
Wavelengths: 660nm (red) and 850nm (NIR)
Brightness: 1%-100%
Input Voltage & Power: 100V-240V, 50-60HZ, 97 Watt
Weight: 7 pounds
Dimensions: 62″ x 24″
Timer: 1 – 30 minutes
Driver: 24V 5A, UL
1 year Warranty
Material: Neoprene
Runs on power supply from electrical outlet

About

Located in Scottsdale, Arizona, Mito Red Light is dedicated to bringing the highest powered, highest quality red light therapy lights to market at the best possible value.

Having extensively studied and realized the benefits of red light therapy firsthand, Mito Red Light was brought into existence in order to provide consumers truly affordable, yet highly effective red light therapy options.

Contact

If you have any further questions, please feel free to contact us at: info@mitoredlight.com

you can also call our phone number
Monday – Friday 9am – 5pm MST 1 (866) 861- MITO
Mail correspondence can be sent to:
Mito Red Light, Inc 9319 N 94th Way, Suite 400 Scottsdale, AZ 85258

Learn more about us at www.mitoredlight.com

Application mitoredllight
mitoredllightofficial
mitoredllight
mitoredllightofficial