BEGA 85 171 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85 171 Performance Floodlight
Product Usage Instructions
DIMENSIONS
Instructions for use
Product Description
Overvoltage protection
Installation
Cleaning / Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 171 Performance Floodlight

BEGA-85-171-Performance-Floodlight_-PRODUCT

Specifications:

Luminaire made of aluminum alloy
LED power supply unit : 220-240 V at 50/60 Hz
Safety class : I
Protection class : IP 65
Impact strength: IK07
Energy efficiency class : D

Product Usage Instructions

Connection and Setup:

Ensure to order a separate mains plug for connecting the floodlight to the mains.
Use the connection adapter with various accessories for mounting on trees, pipes, or wooden structures.

Safety Information:

Follow national safety regulations for installation and operation of the luminaire. The manufacturer is not liable for damage due to improper use or installation.

Overvoltage Protection:

The luminaire’s electronic components have overvoltage protection according to DIN EN 61547. Consider additional protection components against transients available on the manufacturer’s website.

Total Load:

Ensure that the total power consumption does not exceed 6 A when configuring your lighting system. The power consumption of Model 85 171 is 0.05 A.

Lamp Specifications:

Module Designation| Color Temperature| Colour Rendering Index| Module Luminous Flux| Luminaire Luminous Flux| Luminaire Efficiency
---|---|---|---|---|---
LED-1269/930| 3000 K| CRI > 90| 1265 lm| 918 lm| 95.6 lm/W

FAQ

Q: What should I do if the luminaire is not working after installation?
- A: Check the power connection, ensure proper setup according to the manual, and verify that the mains plug is correctlyconnected.
Q: Can I use extension cables with this luminaire?
- A : Yes, extension cables are available as accessories for connecting the floodlight to the mains.

DIMENSIONS

BEGA-85-171-Performance-Floodlight-FIG1

Instructions for use

Application

Performance floodlight BEGA UniLink® with connection adapter for use in combination with various accessories, e.g. for mounting on trees, pipes or wooden structures.
A separate mains plug must be ordered in order to connect the floodlight to the mains. The various country-specific mains plug with 0.5 m connecting cable, as well as extension cables and five-way distribution boxes are available as accessories.

Product Description

Luminaire made of aluminum alloy, aluminum, and stainless steel
BEGA Unidure® coating technology
Color graphite or silver
Clear safety glass
Silicone gasket
Reflector surface made of pure aluminium Optical silicone lens · BEGA Hybrid Optics® Rotation range of floodlight 360°
Swivel range -30°/+70°
5 m mains supply cable
X05RN-F FEP 2 × 1 + 1G2,5 with
BEGA UniLink® plug-in connector
BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V 50/60 Hz
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Conformity mark
Weight: 1.3 kg

This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Total load

When configuring your lighting system, please ensure that the maximum power consumption of 6 A is not exceeded. Information on power consumption can be found in the instructions for use and data sheets for all BEGA UniLink® luminaires.

Power consumption of 85 171: 0,05 A

Lamp

Module connected wattage: 8.4 W
Luminaire connected wattage : 9.6 W
Rated temperature: ta = 25 °C
Ambient temperature: ta max = 50 °C

85 171 K3

Module designation: LED-1269/930
Color temperature: 3000 K
Color rendering index : CRI > 90
Module luminous flux : 1265 lm
Luminaire luminous flux : 918 lm
Luminaire luminous efficiency: 95,6 lm / W

85 171 K4

Module designation: LED-1269/940
Color temperature: 4000 K
Color rendering index : CRI > 90
Module luminous flux :1330 lm
Luminaire luminous flux : 965 lm
Luminaire luminous efficiency: 100,5 lm / W

Lighting technology

Symmetrical wide beam light distribution
Half beam angle 48°
For special lighting applications, the symmetrical light cone can be changed to a flat beam using an additional diffuser lens.

Caution:

The BEGA UniLink® plug connectors may only be connected and disconnected in a voltage-free state.

Installation

Unscrew the hexagon socket screws (wrench size 3 mm) on the sides of the connection adapter and screw the corresponding accessory to the floodlight.
Torque = 5 Nm.

Plug the floodlight’s connecting cable into the plug contact of the connecting cable with the country-specific mains plug, or into the distribution box or extension cable.

To ensure a sufficiently low protective conductor resistance (loop resistance), the connecting cable of each luminaire in the system must not exceed a length of 50 m from the entry point.

Adjustment of beam direction

Undo the joint screw (hexagon socket head wrench size 3 mm) and set the desired beam direction.
Tighten the joint screw.
Torque = 2.5 Nm.

Cleaning / Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Maintenance

The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Please note:

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.
Open the floodlight:

Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.

Replace the LED module.

Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop.

Accessories

The following combination options are available for fitting to floodlights with connection adapter

71 223: Screw clamp with connection adapter
71 224 : Tube clamp with connection adapter
71 225 : Lashing straps with connection adapter
71 226 : General fasteners with connection adapter
71 227 : G½ mount with connection adapter

Shields and diffuser lenses that alter the light distribution are available as accessories for these floodlights.

71 288 : Exchangeable lens flat beam
71 330: Shield
71 335: Cylindrical shield

Country-specific mains plug with 0.5 m connecting cable

71 180 Plug type F / E : system common in Germany and Europe
71 181 Plug type G : system used in Great Britain (“Commonwealth plug”)
71 182 Plug type J : system common in Switzerland and Liechtenstein
71 183 Plug type L : system common in Italy and Greece
71 184 Plug type K: system common in Denmark and Greenland

BEGA UniLink® extension cables with socket and plug

71 186: BEGA UniLink® Extension cable 5 m
71 187 : BEGA UniLink® Extension cable 10 m
71 188 : BEGA UniLink® Extension cable 20 m

BEGA UniLink® connecting cables with a plug connector and one free cable end to connect to e.g. a conventional connection box

71 247: Connecting cable 5 m with free line ends
71 256: Connecting cable 0.5 m with free line ends
BEGA UniLink® distribution box with five connection sockets for the connection of BEGA UniLink® luminaires, extension cables or additional five-way distribution boxes
71 189 : BEGA UniLink® Five-way distribution box

For the accessories, a separate instruction for use can be provided upon request.

Spares