ANDOR MX5 Wireless Microphone

Transmitter Interface Description

• A: Fixing clip: can be quickly installed to the required fixed position.
• B: External microphone socket: Insert the microphone into this socket and insert it in place.
• C: External audio input interface: the audio signal can be input through the adapter.
• D: TYPE-C charging interface
• E: Built-in microphone: the product supports recording with built-in microphones, or through external microphones.
• F: Code matching indicator: The blue light flashes slowly when the transmitter and receiver are not matched, and the blue light is always on after the code is successfully matched.
• G: Switch machine button:

  • 1: Turn on: Long press this button to turn on the product, and the button position will be green.

  • 2: Power off: Long press this button after power on, and the code indicator will flash blue quickly, which means the product has entered in the off state, you can release your finger.

• H: Charging indicator/power indicator:

  • 1: The red light is always on in the charging state, and the green light is always on when the battery is full.

  • 2: This indicator does not light up in the normal voltage range of the product after starting up.

• When the battery power is low, the red light flashes slowly.
• I: Mute button: The product is in the recording state. Press this button to enter the mute mode, and the receiver cannot output audio signals.
• J: Code pairing button: After booting, press this button to enter the code pairing mode, and the blue light of the code pairing indicator will flash quickly.

Receiver Interface Description

• K: Fixing clip: can be quickly installed to the required fixed position.

• L: Audio signal output port: The port output audio signal can be connected to a camera or mobile phone for recording.

• M: Audio signal monitoring interface: you can insert headphones to monitor the sound quality of the recording in real-time.

• N: TYPE-C charging port.

• 0: Code matching indicator: The blue light flashes slowly when the transmitter and receiver are not matched, and the blue light is always on after the code is successfully matched.

• P: Switch machine button:

  • 1: Turn on: Long press this button to turn on the product, and the button position will light up in green.

  • 2: Power off: Long press this button after power on, and the code indicator will flash blue quickly. which means the product has entered in the off state, you can release your finger.

• Q: Charging indicator/power indicator:

  • 1: The red light is always on in the charging state, and the green light is always on when the battery is full.

  • 2: This indicator does not light up in the normal voltage range of the product after it is turned on.

    When the battery power is low, the red light flashes slowly.

• R: Volume +button: product recording status, you can press this button to increase the volume of the recording.

• S: Volume-button/code matching button:

  • 1: Volume reduction function: After the product is turned on, it enters the recording state, you can press this button to adjust the volume reduction of the recording.

  • 2: Code matching function: When the product is turned on, long-press the volume “+ “button to enter the code matching mode, and the code matching indicator blue light flashes quickly.

Technical Parameter

Product Features

1. 2.400-2.483GHZ, ISM band/GFSK modulation.
2. Support 3Mbps RF audio data transmission.
3.  Support 48KHZ/16bit/single-channel audio sampling.
4. The minimum audio delay is 12.5ms.
5. A wide range of applications: such as news interviews, film and television shooting, character interviews, program hosts, teaching training, and other film and television  recording, as well as connection to mobile phone recording
6. With a real-time return monitoring interface, you can connect headphones to monitor the recording effect.
7. Professional circuit structure, strong anti-noise interference ability.
8. The product has a built-in microphone and an external microphone port. The external microphone has a small collar holder, which can be easily and quickly fixed on the chest clothes, allowing users to use it more flexibly and conveniently.
9. The recording sound quality is clear and the sound quality is excellent, which brings users the ultimate recording experience.

Troubleshooting

Product Use Method Steps

1. The product factory package has already paired and connected the transmitter and receiver by default. If the product is not paired, please refer to the above (product interface description) method for pairing.
2. Insert the 3.5 audio 3P male external microphones into the external microphone socket, please refer to the above (product interface description) to find the correct position.
3. If you need the built-in microphone for recording, you don’t need to connect an external microphone.
4.  To find the location of the audio signal monitoring interface, please refer to (Product Interface Description) plugin headphones to monitor the sound quality of the recording in real-time.
5.  To find the location of the audio signal output interface, please refer to (Product Interface Description).
6. Insert the audio signal output interface into the 3.5 audio 3P male to 3.5 audio 3P elbow cable, which can be connected to the camera for recording.
7. Insert the audio signal output interface into the 3.5 audio 3P male to 3.5 audio 4P elbow cable, which can be connected to the phone for recording.
8. The recording transmitter can touch the mute button to enter the mute mode, and the receiving end cannot output audio signals. For the position of the button, please refer to (product interface description).
9. The output receiver can adjust the volume of the output terminal through the volume +- button. For the position of the button, please refer to (product interface description).
10. Find the external audio input interface. The product supports external audio input. For the interface, please refer to (Product lnterface Description) to find the correct location. The audio signal can be input through the 3.5 audio 3P male to 3.5 audio 3P elbow cable adapter, and the receiver synchronously outputs the audio signal of the audio input.

FCC warning:

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

2. This device may not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.
   compliance

3. Changes or modifications h not expressly approved by the party responsible for a moment has been tested and d B digital device Deen tested a version arto nese redesigned provide re Sudnt to part 15 of the FCC Rules These Sor a Class d to installiaton. his equipment generates, uses, and can radiate radio requency energy and, ir not installed and used in accordance with the instructions, may cause names interference to radio communications. however, there is no guarantee that interference does not occur in a particular installation. IT this equipment does cause name interference to radio or television reception, whicn can de determine Dy turning the equipment on and on, the user is encouraged to try to correct the interference Dy one or more of the following measures

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.
     This device should be installed and operated with a minimum distance of 5 cm between the radiator&your body.

Matters Needing Attention

1. This product is a precision electronic device. Avoid rain or heavy fals. If water enters accidentally, please hand it over to professional technicians.
2. Please turn off the product when it is not used for a long time
3. It should be stored in a dry and clean place. Avoid storage or use in places with high temperature, high humidity and strong magnetic fields.
4. Do not use this product while charging.
5. The transmission distance is affected by the interference intensity: 50 meters without interference, and about 15 meters with strong interference or obstruction.

Product Factory List Configuration

1. Transmitter 1PCS
2. Receiver 1PCS
3. 3.5 audio 3P male to 3.5 audio 3P elbow line 1PCS
4. 3.5 audio 3P male to 3.5 audio 4P elbow line 1PCS
5. 3.5 audio 3P male head microphone 1PCS
6.  TYPE-C Cable 1PcS
7. Product manual 1PCS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>