tp-link Archer TXE50UH Wireless USB Adapter Installation Guide
- June 16, 2024
- tp-link
Table of Contents
| Quick Installation Guide
Wireless USB Adapter
Images are for demonstration only.
©2024 TP-Link 7106510926 REV1.2.1
1 Connect to a Computer
Note: It is recommended to connect the adapter to a USB 3.0 ( ) port.
Option 1: Directly
Option 2: Via the USB Extension Cable
2 Install Driver
a. Insert the CD and run the Autorun.exe.
Note:
- For some system version, the drivers will be installed automatically when connected to the internet. If not, please run the driver installation manually.
- You can also download drivers manually from the product’s Support page at www.tp-link.com.
b. Select your model and follow the on-screen instructions to install
the Wi-Fi driver.
Note:
- If an unknown publisher message pops up, select Yes to continue.
- If Windows User Account Control requires admin credentials, type user name and password of your Windows administrator account.
3 Join a Wireless Network
a. Click the network icon on the taskbar (the icon might look like one of
these: , , , or ).
b. Select your Wi-Fi network, click Connect and enter the password when
prompted.
Troubleshooting
If you have problems during the installation, please refer to the following
online FAQs.
T1. Can’t find the hardware version of the adapter: https://www.tp-
link.com/faq-46.html
T2. Can’t find or connect to the wireless networks: https://www.tp-
link.com/faq-2253.html
T3. Can’t install the driver: https://www.tp-link.com/faq-2252.html
Support
For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from water, fire, humidity or hot environments.
- This equipment can be powered only by equipment’s that comply with Power Source Class 2 ( PS2) or Limited Power Source(LPS) defined in the standard of IEC 62368-1.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for
control of or communications with unmanned aircraft systems.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU, 2011
/65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-
link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017.
The original UK Declaration of Conformity may be found at https://www.tp-
link.com/support/ukca
References
- CE Regulatory Compliance | TP-Link
- Difficulties Experienced While Installing a TP-Link Wireless Adapter
- Why cannot I connect to my wireless network | TP-Link
- How to find the hardware version on a TP-Link device
- Regulatory Compliance | TP-Link