NetComm NF10WV VDSL N300 WiFi Modem Router with VoIP User Guide
- June 3, 2024
- NetComm
Table of Contents
NetComm NF10WV VDSL N300 WiFi Modem Router with VoIP
WELCOME
Thank you for choosing a NetComm Wireless VDSL / ADSL N300 WiFi Modem Router with VoIP (NF10WV). This guide will help you set up, connect and configure your device quickly and easily.
PACKAGE CONTENTS
This package includes:
- VDSL/ADSL N300 WiFi Modem Router with VoIP (NF10WV)
- RJ45 Ethernet cable
- Power supply (12V/2A)
- RJ11 Telephone cable
- WiFi security card
- Warranty card
- Quick Start Guide
PRE-REQUISITES
If you are using a voice service on the same line as your DSL service, you will need a DSL line filter for each handset on the line. If you have a Naked DSL service, line filters are not required.
INSTALLING THE DEVICE
- Connect the supplied RJ11 cable to the “modem” port of your DSL line filter and then connect the other end to the DSL port on the back of the NF10WV. Connect the DSL line filter (not included) to the wall socket and then connect your handset to the “phone” port of the filter. If you have a Naked DSL service, simply connect the included RJ11 cable from the DSL port of the NF10WV to the wall socket. If you have a VoIP service, connect your handset to one of the Tel ports on the back of the router.
- Connect the supplied RJ45 Ethernet cable from one of the yellow Ethernet ports (1-4) on the back of the NF10WV to your computer.
- Connect the included power adapter to the Power jack of the NF10WV and then plug it into an available wall socket. Press the ON/OFF button to power the router on. The Power light illuminates in red. When the NF10WV has finished booting up, the Power light turns green.
LOGGING IN TO THE WEB INTERFACE
- Open a web browser (such as Internet Explorer®, Mozilla Firefox® or Google Chrome™), type http://192.168.20.1 into the address bar and press Enter.
- At the login screen, type admin into both the Username and the Password fields and click OK.
CONFIGURING THE DEVICE FOR USE WITH AN INTERNET SERVICE
Click on the Basic Setup menu item on the left side of the screen.
ADSL
a. Select ADSL and click the Next button.
b. Select either the PPPoE or PPPoA for your internet connection as
specified by your Internet Service Provider (ISP). Click the Next button.
c. In the User ID and Password fields, enter the username and password
assigned to you by your Internet Service Provider (ISP). Click the Finish
button.
The account settings are saved and the NF10WV connects to the internet.
VDSL
a. Select VDSL and click the Next button.
b. Select the WAN mode for your internet connection as specified by your
Internet Service Provider (ISP). Click the Next button.
For New Zealand customers, the requirement for VDSL is VLAN tag 10, if you are
not sure of the tagging requirement for your connection, please contact your
ISP.
In the User ID and Password fields, enter the username and password
assigned to you by your Internet Service Provider (ISP)
Click the Finish button when you have entered the required details.
Ethernet WAN
a. Connect an RJ45 Ethernet cable to the WAN port on the NF10WV.
Connect the other end of the cable to your WAN service.
b. Select Ethernet WAN then click the Next button.
c. Select the WAN mode for
your internet connection as specified by your Internet Service Provider (ISP).
Click the Next button.
PPP over Ethernet (PPPoE)
In the User ID and Password fields, enter the username and password
assigned to you by your Internet Service Provider (ISP). Click the Finish
button when you have entered the required details.
IP over Ethernet (IPoE)
If your ISP has supplied a static IP address, select Use the following
Static IP address and enter the details, otherwise select Obtain an IP
address automatically. Click the Next button.
The settings are displayed in a summary. Click Apply/Save to save them.
CONNECTING WIRELESS DEVICES
The default settings of the router have the wireless function enabled so there
is no configuration necessary in order to use the wireless function, simply
connect to the SSID (network name) listed on the WiFi security card. When
prompted, enter the password that is also printed on the card.
CHANGING THE WIRELESS PASSWORD
If you would like to change the wireless password to something easier to remember, follow these steps.
-
Select the Wireless menu from the left side of the screen, then select the Security option below it. The Wireless Security page is displayed.
-
In the WPA/WAPI passphrase field, enter the desired password to use for the wireless network. When choosing a password, try to ensure that it
• is unique;
• is sufficiently long (at least 8 characters in length);
• uses a mix of letters, numbers and symbols;
• does not contain any personal information or common words. -
Click the Apply/Save button.