KUZCO LP46841 LED Linear Pendant Instructions

: June 1, 2024
: KUZCO

Table of Contents

KUZCO LP46841 LED Linear Pendant
Product Usage Instructions
INSTALLATION INSTRUCTION
Documents / Resources

KUZCO LP46841 LED Linear Pendant

KUZCO-LP46841-LED-Linear-Pendant-PRODUCT

Specifications

Model: LP46841
Dimensions: (insert dimensions here)
Power: (insert power specifications here)
Material: (insert material specifications here)

Product Usage Instructions

Installation

Remove the fixture from its original package.
Attach the mounting plate to the electrical junction box using the provided screws.
Pull the strap through the canopy to the desired length. Attach the strap plate to the canopy and secure it with nuts.
Mount the inner ceiling barrel to the mounting surface with the anchor and screw. Attach the outer ceiling barrel to the inner ceiling barrel. Cut off any unwanted length of the strap, loop it through the buckle on the non-power side, and secure it with a screw.
Make proper electrical connections – black to hot L, white to neutral N, ground to GND – using the wire nuts provided.
Attach the canopy to the mounting plate with canopy screws.

Maintenance

Regularly clean the fixture with a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Troubleshooting

If the fixture is not functioning properly, first check the electrical connections and ensure they are secure. If issues persist, contact technical support for assistance.

FAQ

Q: How do I adjust the length of the pendant?

A: To adjust the length of the pendant, follow step 3 in the installation instructions to pull the strap through the canopy to the desired length and secure it with nuts.

Q: What should I do if the fixture does not turn on?

A: Check the electrical connections following step 5 in the installation instructions. Ensure proper connections are made and contact technical support if needed.

START FROM HERE

Make sure POWER is COMPLETELY OFF at the fuse box
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area
Wear gloves at all times during this installation
Read instructions carefully before you start assembly
Keep this installation sheet for future reference
Technical Support: 1-855-855-8926

Please Note:

This Kuzco LED fixture comes with pre-wired LED module(s)
Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
120V input

INSTALLATION INSTRUCTION

KUZCO-LP46841-LED-Linear-Pendant-FIG-1

Remove the fixture from its original package
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package
Pull the strap (6a) through the canopy (2a) to the desired length.
- Attach strap plate (3b) to strap plate screws (3c) in the canopy (2a) and secure with nuts (3a) (See illustration 2)
Mount the inner ceiling barrel (4b) to the mounting surface with anchor (4a) and screw (4c). Attach the outer ceiling barrel (4d) to the inner ceiling barrel (4b) with screws (4e).
- Pull strap (6a) to the desired length cut off any unwanted length and loop it through the buckle (4g) on the non-power side. Secure with screw (4f) (See Illustration 1)
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in the hardware package
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)

19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W:kuzcolighting.com
20240109