1HORA AUT206 Wireless Earbuds User Manual
- June 12, 2024
- 1HORA
Table of Contents
1HORA AUT206 Wireless Earbuds
Package Included
Product Usage Instructions
- Do not try to disassemble or replace any parts in the product except for the operation methods specially marked in the manual.
- Do not submerge the product in water or any other liquid as it is not designed to be waterproof.
- If any liquid accidentally enters the product, please disconnect and remove the product immediately.
- To avoid electric shock, ensure that your hands are dry when installing or uninstalling the product.
- Do not place the product near a heat source or expose it directly to fire.
- Do not place the product in an environment with a strong electromagnetic force as it may cause damage to the product. P
Earbuds Specifications
MODEL:AUT2D6
Connection Distance: 1 OM approx.
Battery capacity: 3.7V 40mAh
Earphones Duration: 6H approx.
Charging Time: 1.5H approx.
FCC ID :2A9HV-Al1T206
Charging Case Specifications
Battery capacity: 3.7V 300mAh
Charging Time: 1.5H approx.
Rated Input: 5V- 330mA
(All technical information is subject to actual performance)
FCC Warning
This device complies with pert 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Charging for Charging Case
Charging Status: Flashing green light
Charging Completed: Steady green light
When the charging case is low in power, white light flashes, please charge in time.
Input: 5V-330mA (Charging case)
LED Indicator Status
Charging Case| Put the earbuds into charging case to automatically charge the
earbuds| Pairing Status: Red & white light flashing altemately
Connected Status: Light turns off
Charging Status: Red light stays on
Charging Completed: Rad light turns off
Low Battery status: Red light flashes
---|---|---
Using Type-C charging cable| Using Type-C charging cable Connect to 5V charger
to automatically charge the earbuds| Charging: Green light flashing
Charging Completed: Green light stays on
Charging Case Charging for Earbuds: While light stays on until fully
charged, then turns off
Product Operating Instructions
-
Power On
Earbuds automatically turn on when taken out of the charging case. -
Power Off
Method 1: Put earbuds back into the charging case to automatically tum off.
Method 2: Press and hold the touch button for 10 seconds to tum off. -
Pairing
Take the earbuds out of the charging case and they will automatically enter Bluetooth pairing mode. Select and connect to the earbuds’ name R1 HORA- AUT206″ from your device’s Bluetooth list.
-
Operation of Touch Button
Music Playback Mode -
Left/Right Earphone Operation
(L)x 1
Play/Pause: Click the touch button on the left earphone (L) for once
(R)x 1
Next Song: Click the touch button on the right earphone (R) for once
(L) or (R) fa-2 Seconds
Voice Assistant: Long-press (L) or (R) for 2 seconds to activate (Siri)
Phone Call Mode
- Left/Right Earphone Operation
Answer Call: Click (L) or (R) for once
End Call: Click (L) or (R) for once
Reject Call: Long-press (L) or (R) for 2 seconds
Warranty Statement
We provide a 3-month warranty service for this product, but the following situations are not covered by the warranty.
- Warranty period has expired.
- Warranty card has been altered and does not match the product code and body.
- Malfunction or damage caused by misuse, abuse, Improper transportation, use, maintenance or storage.
- Malfunction or damage caused by force majeure (such as earthquakes, wars, fires, etc.) or accidents.
- Damage to zippers or buckles due to excessive force.
- Stitching or tearing caused by overloading.
- Damage caused by any sharp object.
- Products with signs of burning or water immersion.
- Damage caused by unauthorized disassembly or modification.
- Aging, discoloration, wear and tear, cracking, and other wear and tear that occur during normal use of the product.
- If the original identification label of the product is changed or damaged, this warranty will be void.
Completeness and appearance of the product and accompanying materials are not covered by the warranty. Please inspect and raise objections on the spot when receiving the product.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.