BUMBLEBEE Converting RC Car Instruction Manual
- October 30, 2023
- BUMBLEBEE
Table of Contents
Converting RC Car
Instruction Manual
INSTALLING BATTERIES IN THE TRANSMITTER:
- Open the battery compartment.
- Insert 2 x 1.5V AA batteries with correct + and – polarities.
- Close the cover.
INSTALLING THE VEHICLE BATTERY:
- Loosen the screw to open the battery cover.
- As shown in Figure 2, remove the battery cover, connect the rechargeable battery with connector and close the battery cover.
HOW TO CHARGE:
A. Loosen the screw to open battery cover.
B. Separate the rechargeable battery from connector.
C. Connect the USB charging cable with rechargeable ‘ battery first. (The
battery connector will only fit in one way. do not force the connectors
together), then plug the USB charging cable into a USB port. The red LED light
on the USB charging cable will light up and will be solid when charging.
D. The green LED light will light up and will be solid after it has finished
charging. Disconnect the USB charging cable from the USB port and then
disconnect the rechargeable battery with USB charging cable.
Attention: Do not charge battery Immediately after each play. Let the
battery cool down for a while.
500mAh rechargeable lithium battery + USB charging cable (Included).
HOW TO USE:
- Turn on the vehicle first and then turn on the transmitter.
- Move the control stick of the transmitter to match the vehicle.
- When the vehicle is functioning, that means they are matched.
- If you have more than two vehicles, please pair one by one. When the second vehicle is pairing, please always keep the first vehicle and transmitter on.
- Please turn off both the vehicle and transmitter and re-start all pairing processes if you are changing to play with another 2.4GHz transmitter.
Press and hold the transformation button to transform the vehicle.
Press the motion sensing button, the indicator light on the remote control will flash and enter the motion sensing mode, then you can put your hand close to the sensing area in front of the vehicle to transform it.
Press the voice sensing button, the indicator light on the remote control
will flash and enter the voice sensing mode, and then you can say “transform”
or something else into the microphone position to transform it.
WARNING: THIS TOY PRODUCES FLASHES THAT MAY TRIGGER EPILEPSY IN
SENSITISED INDIVIDUALS.
WARNING: FOR THE PURPOSES OF RECHARGING THE BATTERY, ONLY USE THE
DETACHABLE SUPPLY UNIT PROVIDED WITH THIS TOY.
WARNING: CHOKING HAZARD-SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3
YEARS.
PRODUCT MAY VARY SLIGHTLY FROM IMAGE SHOWN. PLEASE KEEP PACKAGING FOR FUTURE
REFERENCE. READ THE INSTRUCTIONS BEFORE OPERATING THE PRODUCT. PERFORMANCE
TIPS: DO NOT DRIVE THE VEHICLE THROUGH WATER. DO NOT DRIVE THE VEHICLE INTO
ANY HARD OBJECT.
WARNING: BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND DO
NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES. NON-
RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. RECHARGEABLE BATTERIES ARE
ONLY TO BE CHARGED UNDER ADULT SUPERVISION. THE SUPPLY TERMINALS ARE NOT TO BE
SHORT-CIRCUITED. REMOVE BATTERIES FROM THE TOY WHEN NOT IN USE FOR EXTENDED
TIME OR WHEN BATTERIES BECOME EXHAUSTED. BATTERY INSTALLATION BY AN ADULT IS
REQUIRED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE.
KEYCODE: 43270798
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>