universal douglas BT-4BTSW-A Bluetooth Switches Installation Guide

: June 3, 2024
: universal douglas

universal douglas BT-4BTSW-A Bluetooth Switches Installation Guide

Risk of Electric Shock.

All servicing should be performed by qualified service personnel.
To reduce the risks of electric shock disconnect power supplies before servicing

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Be aware that Line Voltage Connections may be 120Vac or 277Vac or 347Vac
Do not install near gas or electric heaters.
Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
Do not use this equipment for other than intended use
o Wireless devices are only for lighting control
o Wireless controls cannot be used with portable heating appliances

1. Introduction

Douglas Lighting Controls Bluetooth® Wall Station Switches;

BT-4BTSW-A (4-button switch)
BT-8BTSW-A (8-button switch)
BT-DMSW-A (dimmer & 1-button switch)
Provide ON/OFF, Dimming, and Scene control based on the device configuration and fixture wiring. The devices require a Douglas Lighting Controls Bluetooth Controller (BT-PP20-A) connected to the fixture(s).
Each switch is available in either a 120/277VAC or 347VAC model. The devices are capable of communicating with other Douglas Lighting Controls Bluetooth enabled devices (occupancy sensors, gateways, and controllers as part of the defined wireless eco-system) via the Bluetooth wireless network.
Commissioning is conveniently done at deck level with our free iOS App using the Bluetooth functionality of the smartphone.

2. Part Numbers & Names

Part Number| Model
BT-4BTSW-U-A| DOUGLAS LIGHTING CONTROLS Bluetooth 4-Button Switch 120/277VAC
BT-4BTSW-3-A| DOUGLAS LIGHTING CONTROLS Bluetooth 4-Button Switch 347VAC
BT-8BTSW-U-A| DOUGLAS LIGHTING CONTROLS Bluetooth 8-Button Switch 120/277VAC
BT-8BTSW-3-A| DOUGLAS LIGHTING CONTROLS Bluetooth 8-Button Switch 347VAC
BT-DMSW-U-A| DOUGLAS LIGHTING CONTROLS Bluetooth Dimmer & 1-Button Switch 120/277VAC
BT-DMSW-3-A| DOUGLAS LIGHTING CONTROLS Bluetooth Dimmer & 1-Button Switch 347VAC

3. Design Features

Standard single gang dimensions
Tinned and stripped, colour coded wires
Bluetooth wireless technology
120/277VAC models
347VAC models

4. Specifications

Mounting

The device is designed to be mounted into the appropriately sized 120/277VAC or 347VAC wall station gang box

Power

Line Voltage: 120/277VAC or 347VAC (device dependent)
Frequency: 60Hz

Operating Environment

Indoor, stationary, non-vibrating, non-corrosive atmosphere and non-condensing humidity

Operating Temperature

32°F to 104°F (0°C to 40°C)

Storage Temperature

-14° to 140°F (-25° to 60°C)

Approvals

Certified to CAN/CSA C22.2 No. 14
Conforms to UL 508 Standard
FCC Class A
ASHRAE 1 Compliant
CEC Title 24 Compliant

Note

Contains IC: 8254A-B1010SP0
Contains FCC ID: W7Z-B1010SP0

5. Dimensions

6. Installation Features

Tinned and stripped, colour coded wires (Black – Line, White – Neutral, Green – Ground)
Mounts into listed standard wall station gang box
Bluetooth enabled for wireless fixture control and wireless mesh networking
Switches can be used with Decora style switch covers

7. Installation/Wiring/Commissioning

CAUTION Risk of Electric Shock. All servicing should be performed by qualified service personnel. To reduce the risks of electric shock disconnect power connections before servicing.

6. Installation Features

For Installation with field-installed conductors of 60°C (140°F) minimum rating
Mounts into the appropriately sized 120/277VAC or 347VAC wall station gang box – see dimension diagram
Install device into position
Connect wires as shown on diagram (14AWG)
Download free smartphone Commissioning App
Use Commissioning App to configure system

DOUGLAS LIGHTING CONTROLS
toll free: 1-877-873-2797 techsupport@universaldouglas.com
www.universaldouglas.com