Mounting Dream MD2377 TV Wall Mount Instruction Manual
- June 3, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD2377 TV Wall Mount
What’s in the box
Before getting started, let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 75x75mm/3×3″ and equal to/less than 400x400mm/16×16″?
-
Does your TV (including accessories) weigh less than 60 LBS (27 KG)?
-
What is your wall made of?
-
Installation Tools (Not Included)
-
Safety Caution
Please read this instruction carefully before installation.- This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
Attach Brackets to TV
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
NOTE: Not all hardware included will be used.
- Select TV Screws
- Need Spacer?
- No, go to PAGE 3 for detailed combination
- Yes, go to PAGE 3 for detailed combination.
- Attach the TV Brackets
- Screw and washer
- Spacer(s), screw and washer
Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.
Attach Wall Plate to Wall
- For wood stud installation, follow STEP 2A
- For concrete installation, follow STEP 2B
Parts and Hardware
Concrete wall anchor (NOT INCLUDED)
Wood Stud Installation
CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as
shown.
Go to Step 3
Solid Concrete Wall Installation
CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts (01) MUST BE firmly tightened to prevent unwanted movement of
the wall plate assembly. Ensure the wall plate assembly is securely fastened
to the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as
shown.
Hang and Secure TV to Wall Plate
Before hanging TV, please conduct “wall plate installation integrity test” first.
Adjustments
4-1 TV leveling adjustment (±3°):
Loosen 4 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to
level, and retighten to secure.
4-2 Tilting angle adjustment (+5°/-15°):
Pull TV to your desired angle then fasten 2 tilting bolts with Allen key (02)
.
Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as illustration.