GOVO GoSurround 220 Bluetooth Soundbar User Guide
- June 17, 2024
- GOVO
Table of Contents
GOVO GoSurround 220 Bluetooth Soundbar
Product Information
Specifications
- Model: GoSurround 220
- Drivers size: 2 x 52 mm
- Frequency Range: 100Hz-20kHz
- Product Sensitivity: 80dB
- Battery Capacity: 2,000 mAh
- Total Playtime: 14 hours
- Charging Port: Type C
- Input Voltage: 5VDC, 1A
- Product Dimensions: 375 x 80 x 65 mm
- Transmission Distance: 10m
- Charging time: 3-4 hours
- Bluetooth: V5.3
Frequently Asked Questions
- Issue: Some terminal music players do not have an automatic switching play function, which may result in a ‘pop’ noise between songs.
- Solution: If you are unable to connect wirelessly to your mobile device, try removing the Speaker from your mobile device’s list of saved devices.
- Issue: A weak connection between the mobile device and the speaker can affect the sound performance.
- Solution: To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
- Issue: Low battery power affecting sound performance.
- Solution: Ensure that the speaker is fully charged to resolve this issue.
Get ready for MORE, for a LIFE of WOW with your all new GoSurround 220. We strongly recommend you go through this manual completely before beginning to use the product as it contains important technical information to ensure you have a seamless audio experience. It can also be referred to in times of difficulty.
PACKAGE CONTENTS
- 1 x GoSurround 220
- 1 x Type C charging cable
- 1 x Aux cable
- 1 x User manual
- 1 x Warranty card
SPECIFICATIONS
| Model | GoSurround 220 |
|---|---|
| Drivers size | 2 x 52 mm |
| Frequency Range | 100Hz～20kHz |
| Product Sensitivity | 80dB |
| Battery Capacity | 2,000 mAh |
| Total Playtime | 14 hours |
| Charging Port | Type C |
| Input Voltage | 5VDC, 1A |
| Product Dimensions | 375 x 80 x 65 mm |
| Transmission Dist. | 10m |
| Charging time | 3-4 hours |
| Bluetooth | V5.3 |
HOW TO USE
| Power On/Off | Slide the button right to ON or left to OFF |
|---|---|
| Music play/pause | Short press the button once |
| Answer/end call | Short press the button once |
| Reject call | Long press the button |
| Next song | Short press the “+” button once |
| Previous song | Short press the “-” button once |
| Volume up | Long press the “+” button once |
| Volume down | Long press the “-” button once |
| Mode change key | Short press the “M” button to swtich through BT/USB/TF |
| Power saving mode | Long press the “M” button |
to turn off the RGB lights
TWS function| Long press the button ( BT mode )
Led Light| Long press the “M” Mode button 3 sec to change to new style
Note: The product can also work while it is being charged.
PRODUCT CONTROL PANEL
INTEGRATED CONTROL PANEL
MULTIPLE CONNECTIVITY
TWS FUNCTION
- Connect 2 GoSurround 220 at the same time to level up your party game.
- Make sure that both your soundbars are in proximity add in Bluetooth mode.
- Long press the Play button on the main soundbar till you hear the beep sound.
- Then your 2 soundbars are connected in TWS mode.
TROUBLESHOOTING
- Some terminal music players do not have an automatic switching play function, which may result in a ‘pop’ noise between songs.
- If you are unable to connect wirelessly to your mobile device, try removing the Speaker from your mobile device’s list of saved devices.
- A weak connection between the mobile device and the speaker can affect the sound performance. To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
- Low battery power can also affect the speaker’s sound performance. Please ensure that the speaker is fully charged to resolve this issue.
SAFETY INSTRUCTIONS
- Read these instructions before using the product.
- Read all warnings carefully.
- Follow all instructions carefully.
- Do not use this apparatus near water.
- Clean only with dry cloth.
Read User Manual Online (PDF format)
Loading......