ELECOM M-DY10DR Wireless Mouse Instruction Manual

ELECOM M-DY10DR Wireless Mouse

Name and function of each part

• Mouse

• Receiver unit

• Illustrations of this manual are M-DY11DR as all names and functions are the same with M-DY10DR.

1. Left button
2. Right button
3. Wheel
4. Power indicator light It tells the timing of the battery replacement. The base of the wheel illuminates in green for a few seconds when the battery level gets low.
5. Optical sensor
6. Power switch
7. Receiver-unit storage compartment
8. Battery cover
9. Battery-storage compartment
10. USB connector (male)

Inserting the Battery

1. Remove the battery cover.
2. Insert the battery.
   • Ensure that the battery is inserted with its positive + and negative – ends oriented correctly.
3. Attach the battery cover.

Turning the power On

1. Slide the power switch to the ON position.

Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. The mouse is released from the power-saving mode when it is touched.

• Mouse operation may be unstable for a few seconds after returning from the power-saving mode.

Connecting to a PC

1. Start the PC.
2. Insert the receiver unit into the PC’s USB port.
   • Plug in the connector in the correct
   • place with the correct side facing up.
   • If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
   • Do not directly touch the terminal area of the USB connector.
3. The driver will be automatically installed, and you will then be able to use the mouse.

Specifications

Magnetic surface (e.g. steel desk): approx. 3 m

• These values were obtained in ELECOM’s test environment and are not guaranteed.

Dimensions (W × D × H)| Mouse:

Approximately 51 mm × 84 mm × 36 mm (M-DY10DR) Approximately 58 mm × 95 mm × 39 mm (M-DY11DR)

Receiver unit:

Approximately 15 mm × 18 mm × 7 mm

Operating temperature/ humidity| 5°C to 40°C/90%RH or less (without condensation)
Storage temperature/ humidity| -10°C to 60°C/90%RH or less (without condensation)
Supported battery| AAA alkaline battery, AAA manganese battery, AAA nickel- metal hydride rechargeable battery
Operating time| Estimated operating time when using an alkaline battery Continuous operating time: approx. 94 hours Continuous standby time: approx. 750 days

Estimated usage time: approx. 215 days

The above is assuming the computer is used for eight hours a day with 5% of that time spent operating the mouse.

Supported OS| Windows® 10, Windows® 8.1, Windows® RT8.1, Windows® 7, Windows Vista®, Windows® XP, Macintosh OS X 10.11, Macintosh OS X 10.10 (Updating the OS or installing a service pack may be necessary.)

Safety Precautions

• Prohibited action
• Mandatory action
• The situation that needs attention

WARNING

• If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the receiver unit from the PC, and remove the battery from the product. If you continue to use the product under these conditions, it may cause a fire or electric shock.
• If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the receiver unit from the PC and remove the battery from the product. After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
• Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the receiver unit from the PC, and remove the battery from the product. After that, contact the retailer from whom you purchased the product.
• Continuing to use the product while it is damaged may cause a fire or electric shock.
• Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
• Do not put this product in fire, as the product may burst, resulting in a serious fire or injury.
• Do not insert or remove the receiver unit with wet hands. Also, do not make alternations to or forcefully bend the receiver unit.
• Doing so may cause a fire or electric shock.
• The receiver unit presents a swallowing hazard for children, so be sure to store it in a place out of the reach of children.

CAUTION
Do not place this product in any of the following environments:

• In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
• In a moist place or a place where condensation may occur In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (near a magnet, etc.)
• In a dusty place
• This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid.
• Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
• Avoid looking directly at the light of the optical sensor as doing so may cause eye damage.
• Only use this product with PCs and video game systems.
• Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.

References

• ELECOM Global | エレコム株式会社

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>