domli K2 Standing Desk Installation Guide
- June 17, 2024
- domli
Table of Contents
domli K2 Standing Desk
What’s in the box
Safety First!
- Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Please follow the provided instructions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or damages before assembly, and contact us if you notice any issues.
- Please do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
- Do not sit or stand on the product.
- This product is not intended to support people or heavy objects. Avoid placing excessive weight to prevent damage and instability.
- MAX Lifting Weight (including desktop) 100Kg.
Please read the Safety Guidelines above before you start to assemble the product. Assemble the supporting beam (A) of the desk. Select the correct length of the beam according to the size of your top: 1000 mm-1200 mm for the 1200mm long top or 1400 mm-1600 mm for a 1500mm long top. Connect the left and right leg with the motor shaft extension. Loosen both end locking nuts to allow the shaft to extend to the correct length. Attach the rear supporting beam (A) to the legs (L, R).
INSTALLATION
- correct setting for a 1500mm long top.
- Attach the motor to the leg and position the motor shaft.
- Attach the front supporting beam to the legs.
- Adjust the length of the motor shaft to the correct lengths and tighten both shaft locking nuts in place.
- Attach the rear supporting beam (A) to the legs (L, R).
- Attach feet (H) to legs (L, R).
- The correct setting for a 1200mm long top.
- Attach the control unit (K1) and the power block (K2) with screws (8) to the top. Attach feet (H) to legs (L, R)
- The correct setting for a 1500mm long top.
- Attach side brackets (F) to frame.
- Attach the leg assembly to the wood top, using the provided screws (8).
- Connect the wiring to from the control unit (K2) to the motor and the power block (E).
- Secure the cabling in place using the cable clips (11).
- Connect the power plug (10) to the power block.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>