Maxblinker hx-x10 Electric Scooter User Manual
- May 15, 2024
- Maxblinker
Table of Contents
Maxblinker hx-x10 Electric Scooter
Specifications
- Product: Electric Scooter
- Accessories: Charger, Wrench, User Manual
Product Information
The electric scooter is equipped with various features including rear wheel brake, front wheel brake, throttle button, LED display, headlight, folding clasp, front motor drive, rear motor drive, anti-slip pedal, shock absorbers, tail lights, and more.
Product Usage Instructions
Assembly
Assemble:
- Unfold the pole and fasten the folding lock.
- Align the communication line terminals of the instrument and the controller with the notch connection.
- Align the T-bar of the scooter then insert it into the pole, use the provided screw to install and fix it.
Disassemble:
- Loosen the screws that secure the T-bar of the scooter.
- Pull out the head of the scooter and unplug the communication line between the display and the controller.
- Fold the pole gently.
Folding
Folding Steps:
- Lift the folding wrench.
- Open the folding wrench.
- Loosen the screws that secure the T-bar of the scooter.
Battery Removal and Installation
Remove the Battery:
Unscrew the pedal cover screw counterclockwise.
How to Ride
Wear helmets and other protective equipment before riding.
FAQ
Q: What should I do if I encounter issues during product usage?
A: If you encounter any issues or have questions during product usage,
please contact your dealer for assistance.
Electric Scooter
User Manual
ensure safe use, please read the instruction manual carefully. This
instruction manual contains important safety information and tips, please read
it carefully. Do not use the electric scooter before you read it. Keep the
instruction manual properly.
About the manual
Thank you for choosing and purchasing our electric scooter series products!
The manual introduces the safe operation instructions and precautions of the
electric
scooter. Please read them carefully before using them for the first time. If
it is not used according to the manual, it may bring danger. Our company will
not bear any responsibility for the personal injury or property loss caused by
it! For the safety, please read the manual carefully before use to ensure
correct and safe driving! If you have any questions in the use process, or can
not get the information you need from the manual, please contact your dealer
in time!
Please keep the manual properly for reference at any time!
Packing list
1.Product
Electric scooter*1
2.Accessories
Charger*1
Wrench*1
User Manual*1
Electric Scooter User Manual
T25 *If anything missed, please contact the dealer in time!
-02-
Product introduction
Rear wheel brake
Light & Function button Power button
Front wheel brake
Handlebar
Throttle button LED display
Headlight
Pole
Folding clasp Frame Front wheel Front motor drive Kickstand
Hook
Anti-slip pedal Battery unlock screw
Tail lights Shock absorbers
Fender Rear motor drive
Rear wheel
Fault display Speed
Power
Multifunction
Gear Speed unit
LED display
Instructions of buttons
1. Power Switch: Long press the power button to turn on/off. 2. Function key:
A:Short press the function key once: Cycle to switch gears. Pedestrian mode:
Gear indicator is not displayed.
Normal mode: Gear indicator shows white. Sports mode: Gear indicator shows
red. B:Short press the function key twice: turn on / off the front and rear
lights. When the front lights are on, the taillights are always on. 3.
Accelerator: Press throttle button to start and accelerate. 4. Brake: Hold the
brake handle to brake. Lightly step on the rear fender to assist the brakes.
5. Cruise mode: after the constant speed cruise function is turned on,
maintain the current vehicle speed for 6 seconds (vehicle speed 6km/h). Enter
the cruise mode automatically, and exit the cruise mode when pressing the
acceleration dial again or holding the brake firmly.
Note: When the brake is active, pressing the throttle button to accelerate is
invalid!
-03-
-04-
Product assembly 1. How to assemble
Assemble
1. Unfold the pole and fasten the folding lock.
2. Align the communication line terminals of the instrument and the
controller with the notch connection.
Disassemble
3. Align the T-bar of the scooter then insert it into the pole, use the screw provided with the scooter to install and fix it.
2. How to fold
1.Lift the folding wrench.
2.Open the folding wrench.
1.Loosen the screws that secure the T-bar of the scooter.
-05-
2.Pull out the
head of the scooter, unplug the communication line between the display and
the controller, the dismantling part of the head of the scooter is complete.
3. Fold the pole.
-06-
- Gentl y press down the hook to the rear baffle.
3. Battery removal and installation.
Remove the battery
How to ride
1. Unscrew the pedal cover screw counterclockwise.
1. Wear helmets and other protective equipment before riding.
2.Lift the pedal cover from 3.Unplug the charging plug 4.Lift the battery strap and
the quick-release screw on and the power plug of the take out the battery.
the rear wheel side.
controller.
Install the battery
1. Put the battery vertically into the scooter.
2.Long-Press the power button to turn on scooter, stand on the pedal with one foot, press the accelerator, and push the other foot back on the ground.
2.Connect the charging
plug and the power plug of the controller to the battery.
3. Cover the pedal and fasten the silicone edge of the pedal.
-07-
4. Install the screws and tighten it clockwise.
3. When the electric scooter is sliding, put the other foot on the pedal and keep both feet remain stable.
4. Continuously press the throttle to speed up. Turn the handle to adjust the direction.
-08-
5. Hold the brake grip firmly to slow down and stop.
Note:
1. Riding in rain or snow, the braking distance will be extended, Pls pay
attention to slow down. 2. The rear brake can be used for normal driving. The
front and rear brakes need to be used together for emergency braking. Don’t
use the front brake for emergency braking at high speed. Otherwise, it can
cause a rollover.
Safety notes
1. Please abide by traffic laws when using electric scooters. Forbidden to
ride it into motor lanes.
P
2. Don’t park electric scooters in the building’s lobby, evacuation corridor,
or safety exit.
120
kg
6. When the scooter stops or runs at a slow speed, you can get off.
7. Please don’t ride at high speed before you are familiar with the
performance of
the scooter to avoid accidents.
-09-
3. DO NOT ride after drinking or taking medicine.
4. Forbidden to ride with overweight (maximum load: 120Kg).
-10-
5. Forbidden to ride on the road with heavy water, which is easy to cause
danger.
14+
6. Pregnant women and users younger than 14 years old are not allowed to
ride.
9. Forbidden for multiple people or carrying children to ride an scooter at
the same time.
10. Forbidden to modify the battery of an electric scooter privately.
Modification of the battery is dangerous, and improper operation may cause the
battery to explode or fire.
7.Forbidden to ride electric
scooters up and down steps or jumping obstacles.
-11-
8. Forbidden to leave the handlebar with one hand or both hands at the same time when riding.
11. Forbidden to modify electric scooters privately. Private modification may cause an unstable electronic system and cause danger when riding. -12-
Recommended tire pressure: 320Kpa~350Kpa
12. Before riding an electric scooter, please carefully check the scooter
condition make sure that there are no signs of looseness or damage on any
part.
Power circuit, front and rear brakes
Front light
Rear light
13.Before using the electric scooter, check whether the power circuit,
front and rear lights, reflectors, front and rear brakes are normal, and stop
Battery instructions
This is about how consumers charge and maintenance , also hereby listed the
detailed spec of battery for your info, please refer to this manual well and
follow so as to keep long lifespan , performance for the battery.
1. Battery parameters
Name
Parameter Name
Type
Max Charging Voltage
Temperatu re
Li-ion battery 54.6V
-10-40°C
Battery Capacity
Max Charging Current
Charging Temperature
Paramet er 18.2Ah
2A
Name
Rated Voltage
Charging time
0-40°C
Store Time (-10-40° C)
Paramet er 48V
9-10h
3 months (full charge)
2. Warns for battery
1. The battery must be charged and used within the temperature range required
by the battery specification to make the electric scooter work stably and
efficiently.
2. Please make sure you take off the charger when you install the battery to
prevent any danger from happening.
3. It is never allowed to dissolve or impale the battery, also make sure NO
metal stuff go contact with the battery pin electrode, otherwise it might
break the battery .
4. It is forbidden to disassemble or pierce the battery pack casing to avoid
short circuit caused by metal objects contacting the battery contacts,
otherwise it may cause battery damage or personal injury.
5. It is potentially causing fire or explosion if water entering battery
circuit, thus stop using the battery in case this happening and go to the
after sale immediately.
6. You are only allowed to charge the battery with the original adaptor
packed, otherwise it will be causing any unexpected consequence.
7. If finding the battery broken and smells bad or felt hot , you need to
stop using and keep the battery away from other stuffs.
8. It helps prolong the lifespan if storing battery after 100% fully charged.
9.It is not allowed to store the battery under -20°C or higher 50°C condition.
10.You have to charge it to at least 80% capacity if battery not used more
than 30 days.
Better to charge it 100% full every 90 days to protect the battery function.
11.It will help prolong the battery lifespan significantly that you charge
well accordingly to
the manuals after every driving instead of running it out. At room
temperature, the battery can play a higher range and performance. But battery
life and performance will degrade if used at temperatures below 0°C.
Typically, the range may be half or
less than at room temperature at -10°C. 12. Do not charge and park electric
scooters in residential buildings. Keep away from
using it and repair it in time if there is an abnormality.
-13-
combustibles when charging, and the charging time should not be too long.
13.Improper disposal of used batteries may seriously pollute the environment.
Please abide by local regulations when disposing of this battery.
-14-
Tips:
1. When the internal temperature of the battery exceeds 50°C, the battery is
in a protected state and cannot be charged.
2. After fully charged, the electric scooter exhausts its stored power after
about 90-120 days of standby. If it is not charged in time, it may cause
damage to the battery due to excessive discharge. This damage is unrecoverable
and it is beyond of our warranty.
3. Charging steps
Open the charging port cover, Make sure the charging port is clean and dry.
Connect the charger with the battery and the other end with power(100V-
240V;50/60Hz),
make sure the charging indicator is on. When the indicator light on the
charger changes, indicating that the charging process is
normal, otherwise check if the line connection is good. The indicator turns
green when the charger is charging, it indicates that the battery has
been filled to 99%, Please stop charging; long time over charge will affect
the battery life. Tip: When the battery is charged separately, the charging
status can be viewedon the charging indicator on the battery. It displays red
color when charging and green color after full charging.
Changing method 1:
Changing method 2:
Battery interface
Charging Product name Main specification Unfolding size:
Folding size:
Center distance of front and rear wheels
Electric scooter
mmmmm m
mmmmm m
mm
13406301320 1340630625 1030
Parameter
Net Wpoeritght Max speed Max load Max climbing angle Operating temperature
Storage temperature Waterproof level Battery specification Battery type
Battery capacity Rated voltage(DC) Maximum charging voltage(DC) Motor
specification Motor type
Rated power Rated voltage Charger specification Input voltage(AC) Output Power
Output voltage Output current
kg km/h kg ° °C °C /
/ Ah V V
/ W V
V W V A
38 40 120 30 -10 ~ +40 -20 ~ +45 IPX4
Li-ion batter y 18.2 48 54.6
Permanent magnet brushless 1200*2 48
100~240(50~60Hz) 109.2 54.6 2
Note:
Remove the battery to open the silicone charging port, plug the charger DC
plug into the battery charging port; plug the power cord into the charger,
then connect the other port to the socket (100V-240V; 50/60Hz), and confirm
the charger indicator is on normally.
Only use the original electric scooter charger for charging. Do not use any
other models of power chargers to avoid danger caused by voltage mismatch.
-15-
-16-
Maintenance
1. Maintenance considerations
Make sure the electric scooter charger and charging line are disconnected and
ensure that the electric scooter is off.
Wipe the shell with a soft cloth to clean the electric scooter. Please don’t
put more lubricating oil on bearing when you do the maintenance for it.
Please check the brake system and tire are vulnerable parts at least once a
month. When the brake performance and tire grip are reduced, please contact
the dealer to replace the corresponding parts.
Please do not replace the accessories which not provided by manufacturer
without permission, to avoid the safety hazard caused by the inconsistency for
accessories with the scooter.
It is forbidden to clean electric scooters by using water cannon or soaking in
liquid. This will cause permanent damage of the electronic devices in the
host.
In order to protect the user’s safety, the user can not take apart the
electric scooter, otherwise, the user will give up the maintenance warranty
rights of the product automatically.
Tips: Please charge your electric scooter before storage, for preventing the
battery from
discharging too long time. Please ensure charge at least once every three
months. If the storage environment temperature is lower than 0°C, please don’t
charge
electric scooter. Please put it in inside environment temperature (above 10°C)
and then charge, storage temperature is – 10°C to 35°C. Please keep the
electric scooter in a suitable place indoor, dry and appropriate temperature.
You can mask the electric scooter to prevent from the dust.
2. Maintenance of tires.
The tires of this product are pneumatic. When the tire height sinks 20%-30%,
it needs to be inflated. The recommended inflated tire pressure is 320-350
Kpa. The tire needs to be inflated at least once in 2-3 months. Regular
inspection of the inflation can reduce the puncture situation and extend the
life of the tire.
Warranty card
9.1 The product has passed the inspection of the quality control department
and allowed to be sold.
Please keep the warranty card and purchase invoice properly, and present the
warranty card and purchase invoice when repairing. Effective date : Quality
inspection pass seal:
9.2. Warranty Card
Username
Mailing address Phone Purchase address Price
Description & Specification Dealer signature
Gend
Age
er
Zip
Sales order number Body number
User signature
Please keep the warranty card and purchase invoice as after-sales proof. This card must be provided during the warranty. If this card is not provided or the card is altered privately, the company has the right to do non-warranty treatment!
-17-
-18-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>