BEGA 85232 Performance Floodlight with Mounting Box Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85232 Performance Floodlight with Mounting Box
Product Information
Dimensions
Product Description
Safety
Installation
Specifications
Maintenance
Replacing the LED module
Accessories And Spares
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85232 Performance Floodlight with Mounting Box

Product Information

Specifications

Product Name: Performance Floodlight with Mounting Box
Application: For a variety of interior and exterior lighting applications
Installation: To be carried out by a qualified electrician
Overvoltage Protection: In accordance with DIN EN 61547
Beam Direction Adjustment Torque: 7 Nm

FAQ

Q: Can I install the floodlight without professional help?
- A: No, the installation should only be done by a qualified electrician to ensure safety and proper functionality.
Q: How do I protect the electronic components from overvoltage?
- A: Additional overvoltage protection components are recommended, along with using bounce-free switching contacts like an electronic relay.

Dimensions

BEGA-85232-Performance-Floodlight-with-Mounting-Box-
fig-2

Application

Performance floodlight with mounting box.
For a variety of interior and exterior lighting applications.
BEGA Ultradark Optics® offer maximum of illumination and eye comfort due to a minimised diffuse light percentage and highly efficient glare suppression.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Matt safety glass
Internal louvres and polymer lens
BEGA Ultradark Optics®
Louvres and interior surface of anti-glare ring with maximum light-absorbing ultra-black nano-coating
Rotation range of floodlight 350°
Swivel range -25°/+90°
Mounting box with 2 fixing holes
ø 4.8 mm · 67 mm spacing
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@
Connecting terminal 2.5@ with plug connection
Earth conductor connection
BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit 220-240 V 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
– Conformity mark
Wind catching area: 0.023 m²
This product contains light sources of energy efficiency class(es) E, F

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Please note:

Contact with the inner surface of the luminaire reflector should be avoided in order to permanently protect the special stray light-minimising properties of the nano-coating.

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo hexagon socket head screws (wrench size 3 mm) at the mounting box and remove mounting plate.
Disconnect the earth conductor connection from the plug connection.
Pass the power connecting cable through the cable entry in the mounting plate.
Note position of application of the mounting plate “arrow down”.
Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection to terminal (plug connection).
For digital control please use the 2-pole plug connector DA, DA.
In case this connector is not used the luminaire will be operated at full light output.
Push plug into coupler as far as it will go.
Connect the floodlight unit’s green and yellow protective earth conductor to the terminal marked in the mounting plate.

BEGA-85232-Performance-Floodlight-with-Mounting-Box-
fig-5

Make sure that gasket is positioned correctly.
Place floodlight unit onto the mounting plate as displayed in the sketch, align and screw together firmly.

Adjustment of beam direction:

Undo joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction.

Tighten the joint screw.
Torque = 7 Nm.

Specifications

Lamp

Module connected wattage / 18.3 W
Luminaire connected wattage / 20.5 W
Rated temperature / ta = 25 °C
Service life criteria / 50 000 h / L70

85 232 K3

Module designation / LED-1254/930
Colour temperature / 3000 K
Colour rendering index / CRI > 90
Module luminous flux / 2190 lm
Luminaire luminous flux / 1542 lm
Luminaire luminous efficiency / 75,2 lm / W

85 232 K4

Module designation / LED-1254/940
Colour temperature / 4000 K
Colour rendering index / CRI > 90
Module luminous flux / 2375 lm
Luminaire luminous flux / 1672 lm
Luminaire luminous efficiency / 81,6 lm / W

Lighting technology

Symmetrically focused wide beam light distribution with minimal diffuse light percentage.
Half beam angle 25°

Maintenance

Cleaning / Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Maintenance

The connecting cable between mounting box and floodlight has to be inspected regarding obvious damages and has to be replaced by a qualified electrician only.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified person using commercially available tools.
Disconnect the system from the power supply.

Open the floodlight:

Loosen the locking pin (hexagon socket wrench SW 2.5) on the back of the floodlight housing.
Remove the trim ring along with the safety glass and reflector by twisting it anti-clockwise.

Please note:

Contact with the inner surfaces of the louvres and luminaire reflector should be avoided in order to permanently protect the special stray light-minimising properties of the nano-coating.
Grasp the louvres from the outside and lift them out. Loosen the three mounting screws (Torx drive T20) and lift the lens holder (with the loosely inserted lenses) upward horizontally out of the housing.
Replace LED module.
Please follow the installation instructions for the LED module.
Install in reverse order.
When installing the lens holder, make sure that the LED connecting cable is not pinched.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place the trim ring with glass and reflector on the floodlight housing so that the notches in the trim ring and luminaire housing sit on top of each other.
Twist on the trim ring clockwise as far as the stop. Screw in the locking pin.