ansio 1051 Tower Fan Instruction Manual

: June 14, 2024
: ansio

Table of Contents

GUARANTEE
RULES FOR SAFE OPERATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS FOR USE
OPERATION
CARE AND MAINTENANCE
CLEANING
WASTE DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**ansio 1051 Tower Fan Instruction Manual

**

GUARANTEE

This product comes with a standard 1 Year warranty against all manufacturing defects.

In addition, register your purchase at www.ansio.co.uk within 15 days, and you can get an additional one-year FREE Extended Warranty.

Terms and conditions apply. Visit our website for more info.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

You can always contact us when you need any assistance in returning the goods or any

warranty related questions. This guarantee does not affect your statutory rights.

CAUTION

Read Rules for Safe Operation, Installation Instructions and Operation carefully.

WARNING

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without supervision.
When the fan is assembled, the rotor blade guard shall not be taken off anymore.
- Prior cleaning, unplug the fan.
- The rotor guard shall not be dissembled/opened to clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

RULES FOR SAFE OPERATION

Never insert fingers, pencils, or any other object through the grille when fan is running.
Disconnect fan when moving from one location to another.
Be sure fan is on a stable surface when operating to avoid overturning.
DO NOT place the fan in a windowsill, rain may create electrical hazard.
This product is for household use only.

INSTALLATION INSTRUCTIONS

Base Installation

Take out the fan body and the spare parts from the box. Put the front base onto rear base and join them together. Pass the power cord through the flute, then insert the fan body into the base.
Fix the fan body on the base with the plastic nut.

INSTRUCTIONS FOR USE

Warning: Do not rotate the timer knob clockwise from “180 min” to “ON” position.

OPERATION

Switching On

Set the appliance on a dry, level and sturdy surface
Plug the appliance to the mains

On/Off, Speed Selection

To turn the fan ON, press LOW or MID or HIGH button.

Note: For the fan to function, the timer setting should not be in “OFF” position.

To turn the fan OFF press the “OFF” button.

Oscillation

To have the fan oscillate, press the SWING button once. The fan will start oscillating within a rotating angle of 60o
To stop the oscillation, press SWING button again. The fan will stop oscillating.

Timer function

Rotate the timer knob to the desired time. Once the timer counts down to zero, the fan will automatically turn off.

CARE AND MAINTENANCE

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service
personnel if service is needed.

Before cleaning and assembling, fan must be unplugged.
To ensure adequate air circulation to the motor, keep vents at the rear of the motor free
of dust. Do not disassemble the fan to remove dust.
Wipe the exterior parts with a soft cloth soaked in a mild detergent.
Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner, bending.
Do not allow water or any other liquid into the motor housing or interior parts.
When not in use, store the fan (preferably in its original box) in a cool, clean and dry location.

CLEANING

Be sure to unplug from the electrical supply source before cleaning.
Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove soap film with dry cloth.

WASTE DISPOSAL

This item must not be disposed of with the household waste.
Please recycle where facilities exist. Check with your Local Authority for recycling advice. The crossed-out wheeling bin symbol is to emphasize that when the item is disposed, it must be separately collected for recycling the materials they contain in the interest of environment and human health.
By ensuring that you dispose of your old electrical and electronic equipment
according to The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), you are helping to preserve our natural resources

For your nearest disposal facility, visit www.recycle-more.co.uk

Environmental Agency Registration Number for ANSIO: WEE/MM6674AA

KEEP THIS INSTRUCTION MANUAL SAFELY, DO NOT THROW IT AWAY

Ansio Ltd.,
PO Box 106, Banstead, SM7 9BU, UK.
support@ansio.co.uk | www.ansio.co.uk

Customer Support – UK Toll Free 0800 080 6781 or +44 207 157 9795

support@ansio.co.uk
Model: ANSIO 1051 | 1052 | 1034 4 (Jan’23v.01)