PARKSIDE PPMA 20-Li B2 Cordless Polisher User Manual

: June 1, 2024
: PARKSIDE

Table of Contents

PARKSIDE PPMA 20-Li B2 Cordless Polisher
Product Information
Product Usage Instructions
Introduction
intended purpose
Functional description
Further safety directions
Preparation
Charging the battery
Operation
Documents / Resources

PARKSIDE PPMA 20-Li B2 Cordless Polisher

Product Information

Specifications:

Model: PPMA 20-Li B2
Cordless Polisher
Sound Level (LpA): 74.2 dB
Sound Power Level (LWA): 85.2 dB
Vibration Value: 5
Various charging times for different models

Product Usage Instructions

Introduction

Familiarize yourself with all the functions and parts of the device by reviewing the illustrations provided in the user manual before use.

General Description

The cordless polisher comes with a handgrip, power switch, polishing disc, synthetic polishing hood, terry cloth polishing hood, unlock button, battery, soft button, battery level indicator, and speed controller.

Preparation

Remove or insert the battery as needed.
Charge the battery based on the recommended charging times for your model.
Attach the polishing hood onto the polishing disc by centering and pulling it tightly.

Safety Instructions

Before using the power tool, read and keep all safety instructions provided in the manual. Use eye and respiratory protection. Pay attention to the symbols and signs on the polishing hoods.

Usage and Handling

Ensure that the power tool is in good condition before use. Do not use a defective switch. Only use the cordless polisher with qualified personnel for repairs using original spare parts.

Restrisks

Follow the safety instructions and charging guidelines in the manual to minimize risks during use.

FAQ

Q: How do I know when the battery is fully charged?
- A: The battery level indicator on the device will show when the battery is fully charged.
Q: Can I use any type of polishing hood with this cordless polisher?
- A : It is recommended to use the provided synthetic and terry cloth polishing hoods for optimal performance and safety.

Before reading, unfold the page containing the illustrations and familiarise yourself with all the functions of the device

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high-quality product. During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified. Keep this manual safe and in the event that the product is passed on, hand over all documents to the third party.

Exploded Drawing

$PARKSIDE-PPMA-20-Li-B2-Cordless-Polisher-FIG $7$$

GRIZZLY TOOLS GMBH & CO. KG

Last Information Update
Ident.-No.: 72094105082023-10

intended purpose

The device is designed for waxing and polishing or dewaxing of vehicle varnish. The device is intended to be used by do-it-yourselfers. It was not designed for heavy commercial use. The tool is to be used by adults. Children over the age of 16 may not use the tool except under supervision. The manufacturer is not liable for damages caused by improper use or incorrect op- eration of this device. Commercial use will invalidate the guarantee.
The device is part of the X 20 V TEAM series and can be operated using

X 20 V TEAM series batteries. The batteries may only be charged using chargers from the X 20 V TEAM series.

General description

See the front fold-out page for illustrations.

Extent of the delivery

Carefully unpack the appliance and check that it is complete. Dispose of the packaging material correctly.

Appliance
1x terry cloth polishing pad(100% cotton)
1x synthetic polishing pad (100% polyester)
Instruction manual

The battery and charger are not included in the delivery.

Functional description

The device is designed for waxing and polishing or dewaxing of vehicle varnish. Rotating the polishing disc helps achieve a consistent mode of operation. The polish-ing bonnets can be exchange for different applications and detachable for cleaning.

Overview

$PARKSIDE-PPMA-20-Li-B2-Cordless-Polisher-FIG $1$$

Handle
ON / OFF switch
Polishing disc
Synthetic polishing pad
Terry cloth polishing pad
Release button
Rechargeable battery 8 Soft button
Charge level indicator
Charge level indicator
Speed regulator

Technical specifications

Cordless Polisher ….. PPMA 20-Li B2
Rated input voltage (U) ……………. 20 V
Cordless Polisher ….. PPMA 20-Li B2
Idling speed (n0) ……………….0-3300 min-1
Working width ………………….. Ø 250 mm
Protection category………………………IPX0
Weight ……………………. approx. 1,28 kg
Sound pressure level
(LpA) ………………….. 74,2 dB; KpA= 3 dB
Sound power level (LWA)
measured ………….. 85,2 dB; KWA= 3 dB
Vibration (ah, max) . 10,844/s2; K= 1.5 m/s2
Temperature……………………… max. 50°C
Charging …………………………4 – 40 °C
Operation ……………………… -20 – 50°C
Storage …………………………….0 – 45°C
For use with smart batteries (Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band …. 2400 – 2483.5 MHz
Max. transmission power …….≤ 20 dBm

Levels of noise and vibration were determined according to the norms and regulations in the declaration of conformity.

The specified total vibration values and the stated noise emission values have been measured according to a standardized test method and can be used to compare one power tool with another.
The specified total vibration values and the stated specified noise emission values can also be used for a provisional assessment of the load.

Warning:

The vibration and noise emissions may deviate from the specified values during actual use of the power tool, depending on the type and manner in which the power tool is used – and in particular which type of workpiece is processed. Try to keep the exposure to vibrations as low as possible. Examples of measures to reduce vibration exposure are the wearing of gloves when using the tool and limiting the working hours. For this purpose, all parts of the operating cycle have to be considered (for example, times when the electric tool is switched off and times when it is switched on but running without any load).

Charging times

The device is part of the X 20 V TEAM series and can be operated using X 20 V TEAM series batteries. Batteries of the X 20 V TEAM series may only be charged using chargers of the X 20 V TEAM series.

We recommend that you operate this appliance with the following batteries only:

PAP 20 B1, PAP 20 B3, Smart PAPS 204 A1, Smart PAPS 208 A1

We recommend charging these batteries with the following chargers:

PLG 20 A3, PLG 20 A4, PLG 20 C1,
PLG 20 C2, PLG 20 C3, PLG 201 A1,
PDSLG 20 A1, Smart PLGS 2012 A1
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.
---|---|---|---
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.
See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.| See the front fold-out page for illustrations.

Notes on safety

Caution! When using power tools, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and fire. Please read all these instructions before using this electric tool and please keep the safety instructions.

Symbols and icons

Symbols on the device:

Warning!

$PARKSIDE-PPMA-20-Li-B2-Cordless-Polisher-FIG $3$$

Graphical symbols on the polishing pads:

Symbols used in the instructions:

Hazard symbols with information on the prevention of personal injury and property damage

Precaution symbol with information on prevention of harm/damage
Notice the symbol with information on how to handle the device properly

General Safety Directions for Power Tools

Warning! Read all safety notices, instructions, illustrations, and technical data that have been provided with this power tool. Omissions in the compliance with safety directions and instructions can cause electrical shock, fire and/or severe injuries.

Retain all safety directions and instructions for future use.

The term „power tool“ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool).

WORK AREA SAFETy

a) Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable Iiquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operation of the power tool in a damp environment is unavoidable, please use a residual current circuitry. The use of a residual current circuitry reduces the risk of an electric shock.

PERSOnAL SAFETy

a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention white operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If dust extraction and collection devices can be installed, make sure that these are connected and used correctly. Use of dust collection can reduce dust-related hazards.
h) Do not allow yourself to be lulled into a false sense of security and do not disregard the safety rules for power tools, even if you are familiar with the power tool after using it many times. Careless action can lead to serious injuries within a fraction of a second.

POWER TOOL USE AnD CARE

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Remove the plug from the wall socket and/or remove the rechargeable battery before you change the device’s settings, change accessory parts or put away the power tool. Such preventive safety measures reduce the risk
of starting the power tool accidentally

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Look after the power tool and application tool carefully. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grip surfaces dry, clean and free from oil and grease. Slippery handles and grip surfaces do not permit safe operation and control over the power tool in unexpected situations.

CAREFUL HAnDLInG AnD USE OF BATTERy DEVICES

a) Charge the batteries only in chargers that are recommended by the manufacturer. Risk of fire if a charger that is suitable for a specific type of battery is used with other batteries.
b) In the power tools, use only the batteries designed for the purpose. The use of other batteries may result in injuries and risk of fire.
c) Keep the unused battery away from paper clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery contacts may cause burns or fire.
d) If used incorrectly, liquid may leak from the battery. Avoid contact with this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns.
e) Do not use damaged or altered batteries. Damaged or altered batteries can be unpredictable and lead to fire, explosion or risk of injury.
f) Do not expose batteries to fire or elevated temperatures. Fire or temperatures over 130 °C can cause an explosion.
g) Follow all instructions for charging and never charge the battery or the battery-powered tool outside the temperature range stated in the operating instructions. Incorrect charging or charging outside the permitted temperature range may destroy the battery and increase the risk of fire.

SERVICE

a) Have your power tool serviced by a qualified repair person us ing only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b) never repair damaged batteries. All battery repairs should be carried out by the manufacturer or authorised customer service centers only.

Further safety directions

Warning! Touching or inhaling harmful or toxic dusts that may arise from polishing paint containing lead or from polishing certain wood and metals represents a danger to the operator and people who are close by. Keep persons nearby away from the hazard area. Eyes should be protected from the foreign matter, which can cause to fly during the various applications. Dust or breathing masks should filter the dust that is created during operation. Wear hearing protection in addition. If you are exposed to loud noise for a long time, you may suffer hearing loss. Wear protective gloves in addition where appropriate.
Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or fire.
Observe the safety information and notes on charging and proper use as shown in the instruction manual for your battery and charger from the X 20 V Team series. A detailed description of the charging process and further information can be found in the separate operating instructions.

Residual risks

Even if properly operating and handling this electric tool, some residual risks will remain.
Due to its construction and build, this electric tool may present the following hazards

a) Lung damage, if suitable respiratory protection is not worn;
b) Ear damage if working without ear protection.
c) Eye damage if no suitable eye protection is worn.
d) Damage to your health is caused by swinging your hands and arms when operating the appliance for longer periods of time or if the unit is not held or maintained properly.

Warning! During operation, this electric tool generates an electromagnetic field which, under certain circumstances, may impair the functionality of active or passive medical implants. To reduce the risk of serious or lethal injuries, we recommend that persons with medical implants consult their doctor and the manufacturer of their medical implant before operating the machine.

Preparation

Removing/inserting the battery

To remove the battery (7) from the device, press the release button (6) on the battery and pull the battery (7) out.
To insert the battery (7), push the battery (7) along the guide rail into the device. You will hear it click into place.

Only insert the battery once the battery-operated tool is fully ready for use.

Checking the charge status of the battery

The charge level indicator (9) signals the state of charge of the battery (7) by illuminating the corresponding LED(s). To see this, press the soft button (8) next to the charge level indicator (9).

3 LEDs illuminated (red, orange, and green):
- Battery charged
2 LEDs illuminated (red and orange):
- Battery partially charged
1 LED illuminated (red):
- The battery needs to be charged

Charging the battery

If warm, allow the battery to cool before charging.

If necessary, remove the battery (7) from the device.
Slide the battery (7) into the charging slot of the charger.
Plug the charger into a socket.
Once charging is complete, disconnect the charger from the main supply.
Remove the battery (7) from the charger.

Attaching the polishing pad to the polishing disc

Align the polishing disc (3) upwards.
Grasp a terry cloth polishing pad (5) or a synthetic polishing pad (4) with both hands and widen the elastic outwards.
Place the polishing pad (4/5) over the edge of the polishing disc (3) at one point. Pull the pad all the way around the edge.
Pull the polishing pad (4/5) centred and tight onto the polishing disc (3).

Operation

Switching on and off

Insert the battery (7).
To switch on, tilt the on/off switch (2) to position „I“, the device turns on.
To switch off, tilt the on/off switch (2) to position „0“, the device turns off.
Firmly hold the device with both hands on the handle (1).
The speed can be set using the wheel on the front of the device.

Waxing/polishing paint surfaces

Use the terry cloth polishing pad (5) for applying polish.
Apply the wax or polish on a slightly smaller area than the area you would like to polish.
Work with the polish in a crosswise movement or circular motion. Exert only moderate pressure on the surface.
Please refer to the information from the Polish manufacturer.

Do not allow the polish to dry out. There is a risk or surface damage. Therefore, do not work in direct sunlight or on a heated surface.

Dewaxing/polishing paint surfaces

Use the synthetic polishing pad (4) to remove wax.
Work in a crosswise movement or circular motion. Exert only moderate pressure on the surface.
Please refer to the information from the Polish manufacturer.

Cleaning and maintenance

Switch off the device and remove the battery before carrying out any maintenance work.
Have any work on the device that is not described in this instruction guide performed by a professional. Only use original parts.

Always check the device before using it for obvious deficiencies such as loose, worn or damaged parts, correct the positioning of screws or other parts. Examine the polishing disc in particular. Exchange the damaged parts.

Cleaning

Do not use any cleaning agent or solvent. Chemical substances can etch the plastic parts of the device. Never clean the device under running water.

Thoroughly clean the device after every use.
Clean the ventilation openings and the surface of the device with a soft brush or cloth.
Hand wash to thoroughly clean the covers after each use. Only use a mild soap sud.

Storage

Store the appliance in a dry place (0 – 45 °C) well out of reach of children.

Waste disposal and environmental protection

Remove the battery from the device and recycle the device, battery, accessories and packaging in an environmentally-friendly manner.

Electrical devices do not belong in domestic waste. The crossed-out waste bin symbol means that this product must not be disposed of with household waste after its service life.

Directive 2012/19/EU on waste electrical and electronic equipment: Consumers are legally obliged to recycle electrical and electronic equipment in an environmentally sound manner at the end of its life. In this way, environmentally friendly and resource- saving recycling is ensured.
Depending on the implementation in national law, you may have the following options:

Return to a shop,
Hand over to an official collection point,
Return to the manufacturer/distributor.

This does not affect accessories enclosed with the old devices or tools without any electrical components.

Do not throw batteries into domestic waste, fire (risk of explosion) or water. Damaged batteries can harm the environment and your health if poisonous fumes or liquids escape.

Hand over the device at a utilization location. The plastic and metal parts employed can be separated out and thus recycled use can be implemented. Ask our Service-Center for details.
Defective units returned to us will be disposed of for free.

Dispose of the batteries according to local standards. Defective or used batteries must be recycled in accordance with Directive 2006/66/EC. Hand in the batteries at a used battery collection point where they are recycled in an environmentally friendly manner.

For more information, please contact your local waste management provider or our service centre.
Dispose of batteries in a discharged state.

We recommend covering the contacts with an adhesive strip to protect against short circuits. Do not open the battery.

Replacement parts / Accessories

Spare parts and accessories can be obtained at www.grizzlytools.shop

If you have issues ordering, please use the contact form.

If you have any other questions, contact the ” Service Center” (see page 27).

Terry cloth polishing pad ………91103977
Synthetic polishing pad ………..91103978

Guarantee
Dear Customer,
This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace –at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred. If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on the repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery. The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. terry cloth polishing pad, synthetic polishing pad) or to cover damage to breakable parts (e.g. switches).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorized service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, please follow the directions below:

Please have the receipt and item number (IAN 434654_2304) ready as proof of purchase for all inquiries.
Please find the item number on the rating plate.
Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.
After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.
We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect. Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.
We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: 0800 1528352
(German phone number)
E-Mail (Germany): k[email protected]
IAN 434654_2304

Importer

Please note that the following address is not a service address. Please initially contact the service center specified above. Grizzly Tools GmbH & Co. KG Stockstädter Straße 20 63762 Großostheim

GERMANY