PARKSIDE PBKW 300 A1 Starterset 300 W Smart Instruction Manual

PARKSIDE PBKW 300 A1 Starterset 300 W Smart

PV-Balkon kraftwerk Starterset 300 W Smart PBKW 300 A1

The PV-Balkonkraftwerk Starterset 300 W Smart is a solar panel set that can be mounted on the balcony or terrace of your home. The set comes with a solar panel, hooks, screws, and a user manual. With this set, you can generate your own electricity and reduce your energy bills.

Product Usage Instructions

1. Before using the product, unfold the page containing the illustrations and familiarize yourself with all functions of the device.
2. Anmeldung bei Ihrem lokalen Stromanbieter is erforderlich (Registration with your local electricity provider is required). Please contact your local provider for more information.
3. Read the user manual carefully before using the product.
4. Be careful of electric shock and high temperatures while using the product.
5. The inverter is not a replaceable product. Please contact customer service if you encounter any problems.
6. During installation, keep in mind the limited space available on your balcony or terrace.
7. The set comes with a solar panel, hooks, and screws. Follow the instructions to install the set on your balcony or terrace.

Technical Specifications

• Solar Panel: 300W
• Inverter: Smart Inverter
• AC Voltage: 230V
• Frequency: 50Hz
• Dimensions: 1200mm x 800mm x 50mm
• Weight: 15kg

Safety Instructions

• Read the user manual carefully before using the product.
• Be careful of electric shock and high temperatures while using the product.
• During installation, keep in mind the limited space available on your balcony or terrace.
• Do not attempt to replace the inverter by yourself. Please contact customer service if you encounter any problems.
• If you install a circuit breaker on the AC side, a circuit breaker with a rated current of 10A is recommended.

PV-Balkonkraftwerk Starterset 300 W Smart PBKW 300 A1

Translation of the original instructions

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product. During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed. The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.
Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended Use
This balcony PV system is designed and suitable exclusively for use as a small power supply system for self-consumption. Intended use also includes observing and adhering to all the information in these operating instructions. Any other improper use can lead to a significant hazard to people, animals or the environment.

General notes on balcony solar systems
Most PV systems require installation and placing into operation by a qualified electrician. Small devices with a power of 600 W per household are exempted from this rule: Residents may install those by temselves. Conditions apply:

• According to the German Federal Network Agency (Bundesnetzagentur) and VDE, a standard household socket is not suitable for connecting a balcony PV system. An inlet socket, installed by a qualified electrician, is required.
  An inlet socket is included with your device.

• A qualified electrician shall check the power circuit and circuit breakers to ensure the house installation is compatible with the PV system. Registration with your local power supplier is required. Please contact your local supplier for details. Registration with the Federal Network Agency’s market master data
  register (Marktstammdatenregister) is mandatory. Please visit https://www.marktstammdatenregister.de/MaStR for details.

Individual requirements from your rental agreement or building code may apply.

General Description

The illustrations can be found on the front foldout page.

Extent of the delivery

• PV balcony power plant
• Instruction manual

Overview

1. Solar panel
2.  2x hook
3. 2x long bolt TX M6x65
   • 4x short bolt TX M6X16
   • 6x nut M6
4.  2x clamp with bolt M8x30
   • 2x nut M8
   • 2x bolt TX M10X20
   • 2x headless screw TX M10X20
5. 2x thin sheet
6. 2x solar panel clamp unit
7. Rail guide
8. Inlet socket with installation frame
9.  AC cable：L, N, PE =1.0mm2
10.  Inverter
11. Screw kit for attaching the inverter to the solar panel
    • 2x bolt TX M8X20
    • 2x spring washer M8
    • 2x flat washer M8
    • 2x nut M8
    • 12 Screw kit for attaching the inverter to the rail
    • 2x bolt TX M6X16
    • 2x washer M6x30
    • 2x nut M6

Technical data

PV module:

• Solar panel module number:………………………………………………………………PSM 160
• Max. power………………………………………………………………………………………….160 W
• Full power Voltage……………………………………………………………………………..d.c. 25.0 V
• Max. current Impp……………………………………………………………………………..d.c. 6.4 A
• Maximum overcurrent protection rating………………………………………………………d.c.10 A
• Open-circuit voltage…………………………………………………………………………..d.c. 30.0 V
• Short-circuit current……………………………………………………………………………..d.c. 7.0 A
• PV module efficiency……………………………………………………………………………..19.30 %
• Connection cable…………………………………………..DC connecter compatible, 2 x 2.5 mm²
• Ambient temperat ure range……………………………………………………………-40 °C – 85 °C
• Max. System voltage………………………………………………………………………d.c. 1000 V
• Performance guarantee……………………………………………….25 years on 80% rated power
• Product warranty………………………………………….10 years on material and work man ship

Inverter:

• Model number:………………………………………………………………………………….PMW 300
• Number of DC input conectors:………………………………………………………………………….2
• DC input connector type…………………………………………………………compatible with MC4
• AC connectors …………………………………………………………………………………………….2
• Input data (DC) Recommended input power (STC)…………………………………….Min. 160W
• Maximum input DC voltage ……………………………………………………………………d.c. 35 V
• MPPT voltage range…………………………………………………………………………d.c. 16-35 V
• Operating voltage range…………………………………………………………………d.c. 18-25 V
• Max. DC short circuit current……………………………………………………………….d.c. 10 A*2
• Max. input current …………………………………………………………………………..d.c. 6.5 A*2
• Output data (AC) Rated output power………………………………………………………….300 W
• Maximum output current…………………………………………………………………………….1.4 A
• Rated voltage range……………………………………………………………….a.c. 230 V
• Rated frequency range…………………………………………………………………………50 Hz
• Power factor………………………………………………………………………………………….0.98 -1
• CEC weighted efficiency: ………………………………………………………………………..95.0 %
• Static MPPT efficiency…………………………………………………………………………………99 %
• Power consumption without sun……………………………………..Max. 2 W (with WiFi module)
• Ambient temperat ure range……………………………………………………………….-25 to 60 °C
• Maximum altitude………………………………………………………………………………….2000 m
• Protection class…………………………………………….………………………………………….. I
• Bluetooth Frequency Band/Power ……………………………2400 MHz-2483.5 MHz/ 5 dBm
• Wifi Frenquency Band/Power……………………………….………2.412-2.472 GHz/14 dBm
• Maximum overcurrent protection rating: …………………………………………………….a.c. 10A
• Max.apparent AC power: ……………………………………………………………………….330 VA
• Max inverter backfeed current to the array: ……………………………………………………. 0 A
• Overvoltage category: …………………………………………………………………II(PV),II(MAINS)
• Ingress protectiona : …………………………………………………………………………………IP64
• Environmental category: ……………………………………………………………………………..PD3
• Wet locations classification: ……………………………………………………………………Outdoor
• Pollution degree classification for the intended external environment …………………………………..…PD3
• Relative humidity ratings rue range: …………………………………………………………….0-95%

Mounting system

• Wind zone suitability ……………………………………………………………………………………..4

1.  Your data will not be deleted from the cloud when the inverter is reset. To delete your data from the cloud, please use the “Disconnect and delete data” function of the associated app.
2. The data protection declaration can be found in the app under “My area”.
3. The mounting system is not intended for permanent installation on the building; screwing to the masonry is not permitted.
4. The assembly may only be carried out as described by clamping the balcony power plant to suitable balcony railings (ideally metal railings).

Saftey information

Graphical symbols

Warning symbols with information on damage and injury prevention.
Hazard symbol with information on the prevention of personal injury caused by electric shock.
Declaration of conformity
(see chapter “Declaration of conformity”): Products marked with this symbol meet all the applicable Community regulations of the European Economic Area.
TÜV SÜD approval mark
This symbol indicates that the device complies with the protection class II.
Read the operating manual.
Read through the instruction manual carefully.
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Red light means overload, green blinking means the inverter is tracking the maximum power point of the solar panel, and continuous green light means the working status.
Caution, risk of electric shock! Energy storage, 1 min discharge.
Caution: High temperature burns!

General Safety Directions

Caution! When using this system, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and fire. Please read all these instructions before using this electric tool and please keep the safety instructions. Beware! The solar panel, accessories, or tools dropping from height can cause severe injuries or death, or property damage. Restrict access to the installation side. Beware! The solar panel dropping from height can cause severe injuries or death, or property damage. Check the mounting system at least once a year. Ensure all screws are tightened properly and no components show wear and tear.

Warning
This product is a PV-module with integrated electronics. Changes and replacement of any part shall only be performed according manufacturer’ s instruction to avoid hazards.
The inverter is a non-removable product. If you have any problems, please contact after-sales service.

Warning! When the photovoltaic array is exposed to light, it supplies a d. c. voltage to the PCE. The isolation transformer between PV and AC inside the inverter meets the requirements of strengthened insulation.

Installation
Suitable Balconies
Before unpacking, please verify that your balcony is compatible with the included mounting system:
The hand rail itself and its connection to the building is capable and approved to carry the added weight. This must include the wind force. Please check the technical specifications for the maximum suitable wind zone, and verify the local wind zone with your local authorities to verify. The hand rail is round, within a diameter of 45 mm. The banister has vertical or horizontal struts, round, with a diameter within 20 mm. The mounting system is only suitable for installing the panel parallel to the banister itself; no added inclination is allowed. Check your state building code for requirements for the erection of installations. The static system calculation should allow installations up to 7 m above ground.

If the circuit breaker is added at the AC side, the circuit breaker with the rated current of 10A is recommended.

Required Tools

• A. Torx T27 & T45 Key
• B. 10 mm & 13 mm spanner wrench

Step 1: Decide installation position

• The solar panel is suitable for vertical and horizontal mounting. The orientation has no influence on power production. You only need to consider the available space and the desired location of the inverter.
• If you wish to connect a second panel (sold separately) to the same inverter, please mind the limited length of the connector cables. Choose an orientation and inverter position that allows rinning the cables tension-free.
  Choose an inverter position within cable distance to the inlet socket. The manual shows an example of vertical assembly.

Step 2: Attach rail to the balcony

• Decide on a suitable position for the clamps. Use the clamps (4) to bend a metal sheet (5) carefully around a suitable strut. Do not fold or kink the sheet (5). Attach the clamp units (4) to the banister using the screws in each opposing claw. A large distance between the two clamps is preferrable. Do not tighten yet. Screw the rail guide (7) to the clamp units. The open side of the rail guide must face outside, away from the clamp units. Do not tighten yet. Carefully adjust the position of the clamps to ensure the rail is horizontal. Now, tighten the screws holing the clamp units to the balcony struts, then tighten the screws holding the rail guide.

Step 3: Attach hooks and inverter to solar panel

• Unpack the carton box. To prevent damage to the solar panel, place it on a soft matt. Do not step on the solar panel. Verify that the contents match the scope of delivery.
• Attach the hooks to the solar panel, using two short screws (3), and to two nuts (3).
• Use screw kit (11) to install the inverter on the solar panel as shown in figure F.
• Alternatively, use screw kit (12) to attach the inverter to the rail (7) as shown in figure G.

Step 4: Place the panel

• With the help af a second person, hang the solar panel to the hand rail by the mounting hooks.
• Ensure the inverter’s connectors are accessible. If necessary, adjust the position of the inverter, rail, or solar panel.
• Once satisfied,use the solar panel clamps to attach the solar panel to the rail (7)
• Use the long bolt (3) to secure the solar panel to the hand rail. Do not overtighten!

Step 5: Electrical connections

• Remove the protective caps from one DC input connector pair, guide the cables through the bannister to ensure there is no tension on the cables. Connect the solar panel to the inverter. Fully insert the plugs to ensure the connection is permanently watertight.

• Remove the protective cap from one AC connector. Connect the matching plug of the AC cable to the inverter. Ensure the plug is locked in position to ensure it is permanently watertight.
  Guide the AC cable towards the inlet plug, ensuring there is no strain, no sharp edges, and no other damage hazard for the cable. Insert the plug into the inlet socket. Ensure the plug is locked in position to ensure it is permanently watertight. Congratulations, the installation is complete.

• The inverter and WLAN module will take a few seconds to boot up. Please follow the respective installation guide on how to access the inverter.

Connecting to the Lidl Home app

The inverter can be connected to the Lidl Home app.

1.  Also see the section “Activating/deactivating Bluetooth”.

2.  Enable Bluetooth on your smartphone.

3. Open the Lidl Home App. From here there are options , and to connect the inverter.

4. If the inverter is the first device you want to connect to the app:

5.  On the tab, select the option „Add device“. The app scans the area for available devices and indicates if available devices have been found. If this is not the case, read on if possible

6.  If you select „ADD DEVICE“, the available devices are displayed in a list.

7.  Select the inverter by setting the check mark . Select only one device at a time. If there are other check marks for other devices, clear the check marks by pressing them.

8.  Select the WiFi network your smartphone connect and enter the password (only supports 2.4G router network).

9. Confirm the successful connection with „Done“. The inverter is now listed in the tab and is connected.
   If you have already connected other devices to the app:

10.  On the tab , select the in the upper right. The app scans the area for available devices and indicates if available devices have been found.
    If this is not the case, read on if possible . If a list of available devices is not automatically suggested to you:
    If the inverter is not suggested automatically, follow these steps:

11.  On the tab , select the in the upper right.

12. Select „Others“ in the bar on the left.

13. Select „Others-1“.

14.  Select the Wi-Fi network your smartphone connect and enter the password then press”NEXT”

15.  Switch to the “AP mode” by choosing at the upper right menu ” “. Check the Wi-Fi LED status on the inverter and press „Confirm the indictor is blinking slowly“ if with yes answer.

16.  Now connect to the device’s hotspot. The device will be connect in 2 minutes. Upgrading the firmware can change the features of the app.

Activating/ deactivating Bluetooth
To activate Bluetooth, make sure the inverter is on power. If the indicator isn’t blinking, please start the reset step:

1. Power on the device;
2. Hold the RESET button for 5 seconds. Once the indicator is blinking rapidly, please hold the RESET button for 5 seconds again.
3. Make sure that the indicator is blinking slowly;

When the inverter is powered off, Bluetooth is deactivated. The inverter is shown in the Lidl Home app as “offline”.

Features of the app
If you select a inverter, this will take you to the overview page.

• Brief overview (above)
  Here, in the window above, a brief overview of the inverter is provided with a picture. The current temperature ,status, power generate/ income/ consume are shown.

• Statistics
  Here you will find the DAY/MONTH/YEAR power generate data.

• Settings
  You will find ” ” button at the bottom right after you have selected the inverter. And you can make the “Price setting” ,enter the market electricity unit price, the income caused by power generation will be shown at the Home page. You can also access„ Device ID“ „Device model“ from this menu.

• Important !
  You will find the at the top right after you have selected the inverter. Press the then and you can rename the inverter under „Name“ or assign a „Location“ to the inverter. You can also access „Device Information“ from this menu. In this menu, you can select to receive a notification on your smartphone if the inverter is online under “Offline Notification” . Under „Share Device“, you can authorize another user from the same household to use the inverter via the Lidl Home app. You can also find the frequently asked questions here under „FAQ“. ,The inverter can also be removed under „Remove Device“. See also chapter „Disconnecting the device from the app“

Disconnecting the device from the app

1.  In the tab, select the icon in the top right
2.  Select „Device Management“.
3.  Select the inverter by setting check mark . The inverter can be removed under „Remove device“ on the bottom.

Cleaning and Maintenance

Beware! Brushes and other cleaning tools dropping from height can cause severe injuries or death, or property damage. Use a soft cloth and a mild detergent to clean the solar panel, inverter, and cables. Do not use metal objects.
Do not use abrasives, as they can cause the solar panel’s surface to become dull and cloudy. This can severely reduce the efficiency. Reduced efficiency due to improper cleaning is not covered by warranty. After cleaning, rinse all parts properly. Detergents remaining on the device an cause corrosion.

Waste Disposal/ Environmental Protection

Dispose of the panel, its accessories and the packaging in an environment- friendly manner. Electrical appliances must not be disposed of with the domestic waste. The plastic and metals can then be sorted out and graded for recycling. Our Service Centre will be happy to answer any questions in this respect. Defective units returned to us will be disposed of for free. Small devices can also be returned to the shop where they were purchased. It is the user’s own responsibility to delete any personal information from the device to be disposed of.

Guarantee
Dear Customer, this device comes with a three-year warranty from the date of purchase. For the solar panel, we also provide a 10 year guarantee for the material and a 25 years peak power guarantee. (Less than 20 % solar power degratation.) In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee
The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase. If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred. If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects
The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking.
Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover
The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery. The warranty is only valid for material or manufacturing defects. This warranty does not extend to consumable parts exposed to normal wear and tear (e.g. battery capacity). This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Neither does it extend to damage resulting from water, frost, lightning and fire or improper trans port. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch. Processing in Case of Guarantee To ensure efficient handling of your query, please follow the directions below:

• Please have the receipt and item number (447982_ 2207) ready as proof of purchase for all enquiries.
• Please find the item number on the rating plate.
• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.
• After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you.

Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you. We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect. Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted. We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Deutschland
Tel.: +49 2152 9603 100
E-Mail: [email protected]
IAN: 447982_ 2207

Importer
Please note that the following address is not a service address. Please initially contact the service centre specified above.

Ga-Po Vertrieb GmbH
Heinrich-Horten-Straße 5
47906 Kempen, Germany

declaration of conformity

We hereby confirm that the Solar module PSM160 and Inverter PMW300 in model PBKW 300 A1
Serial number 000001 – 015360
conform with the following applicable relevant version of the EU guidelines:

• 2014/53/EU
• 2011/65/EU

In order to guarantee consistency, the following harmonised standards as well as national standards and stipulations have been applied:

• EN IEC 61215-1:2016
• EN IEC 61215-1-1:2016
• EN IEC 61215-2:2016
• EN IEC 61730-1:2016
• EN IEC 61730-2:2016
• EN IEC 62109-1:2010
• EN IEC 62109-2:2011
• EN IEC 61000-6-1:2019
• EN IEC 61000-6-3:2021
• EN 301 489-1 V2.2.3
• Draft EN 301 489-17 V3.2.5
• EN 300 328 V2.2.2:2019
• EN 50663:2017
• EN 62311:2008

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Ga-Po-Vertrieb GmbH
Heinrich-Horten-Str. 5, 47906 Kempen
Germany

The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.

Ga-Po-Vertrieb GmbH
Heinrich-Horten-Str. 5, 47906 Kempen
Deutschland
Modell-Nr.: PBKW 300 A1
Stand der Informationen
Last Information Update
Version des informations
Stand van de informatie
Stan informacji
Stav informácií
Estado de las informaciones: 03/2023

References

• Startseite | MaStR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>