BaBylissPRO BPOR1 Nano Titanium Italian Hair Dryer Instruction Manual
- June 13, 2024
- BaBylissPRO
Table of Contents
BaBylissPRO BPOR1 Nano Titanium Italian Hair Dryer
POWER & HIGH PERFORMANCE
Your dryer is equipped with a very high-performance motor, made in Italy, with 2000W of power. It delivers air speed of 140 km/hr and airflow of 75m3/hr for an exceptional drying coefficient of over 5 grams of water per minute.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
- DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:
- ALWAYS UNPLUG THE APPLIANCE IMMEDIATELY AFTER USE.
- Do not use while bathing or in the shower.
- Do not place or store appliances where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
- WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- This appliance should never be left unattended when plugged in.
- This appliance should not be used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped, damaged, or dropped into water. Return the appliance to place of purchase for examination and repair.
- Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and other debris.
- Never use while sleeping.
- Never drop or insert objects into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord to operate dryer.
- Do not direct hot air toward eyes or other heat-sensitive areas.
- Air outlet grill and attachments may be very hot during use. Allow them to cool before handling.
- Do not place appliance on any surface while operating.
- While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
- To prolong the life of the dryer, keep filters clean of hair and dust.
- Do not use with a voltage converter.
OPERATING INSTRUCTIONS
This appliance is intended for professional use. Use on Alternating Current (60 hertz) only. Standard dryers are designed to operate at 110 to 125 volts AC. This dryer is not dual voltage. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE DRYER.
-
This hair dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under some abnormal conditions, such as immersion in water.
-
To make sure the ALCI is functioning properly, perform the following test. The purpose of this test is to allow you to make sure the exclusive water-sensing system (ALCI) is working.
-
Plug in hair dryer and press test button on the plug (see appropriate diagram).
-
Hair dryer will stop working. There will be an audible click and reset button will pop out. This indicates the ALCI is functioning properly.
-
To reset ALCI with a reset button: Unit should be unplugged. Then push reset button in and reinsert plug into outlet.
-
If ALCI is not functioning properly, return hair dryer to place of purchase
-
It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
-
Be sure to repeat test every time you use hair dryer to confirm ALCI is operational.
-
Should the dryer go off and the ALCI reset button pop up during use, this could indicate a malfunction in the dryer. Remove plug from outlet and allow the dryer to cool. Push the reset button in and reinsert plug into outlet.
-
Dryer should function normally. If not, return to a BaBylissPRO® Service Center for examination and repair.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well-maintained. Always treat
hair right with superior-quality shampoos, conditioners, and finishing
products.
DRYING BASICS
- Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel-blot hair to remove excess moisture. Section hair. Using the dryer along with your styling brush, direct hot air through a section of hair at a time. Move the dryer steadily across each section so that the hot air passes through the hair. Direct airflow at hair, not scalp.
- Keep the dryer’s air intake vents unobstructed and free from hair while drying.
- To avoid overdrying and possible damage to hair or skin, do not concentrate heat on one section for any length of time. Keep the dryer moving as you style.
- For quick touch-ups between shampoos, dampen hair with a mist of water before styling with the dryer.
- When using your dryer to create curls and waves, dry hair almost completely on a warmer temperature setting, then finish styling with cooler air.
- This dryer includes concentrator attachments. Use the attachments when you need drying power in a small area (such as a curl or a wave), or when you want to relax curly hair.
NANO TITANIUM™
Your BaBylissPRO® Portofino®/Torino® Hair Dryer has many benefits. Nano titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The nano titanium technology uses microparticles of titanium that provide the ultimate heat performance for beautiful, healthy-looking hair results. Nano titanium™ yields maximum far-infrared heat, penetrating the hair from within for gentle drying without damaging hair.
NEGATIVE ION GENERATOR
The BaBylissPRO® Portofino®/Torino® Hair Dryer has a central negative ion
generator that generates an exceptional volume of ions – up to 40 million per
cm3. Hair is naturally positively charged; this positive charge is increased
during drying and generates static electricity that causes the scales of the
hair to move away from each other. The surface of your hair thus becomes rough
and takes on a lifeless appearance. The negative ions generated by the hair
dryer will neutralize the positive charge and, in this way, remove any static
electricity in the hair. With the hair cuticles properly closed, the hair is
shiny and easy to style. It has been proven that ionic technology acts as a
catalyst for hair products.
LIGHT AND ERGONOMIC
The BaBylissPRO® Portofino®/Torino® Hair Dryer is a compact hair dryer, with
an ergonomic handle that makes it very comfortable to use. Weighing 19 ounces
and ideally balanced, it offers optimal working conditions.
CONCENTRATOR NOZZLES
The BaBylissPRO® Portofino®/Torino® Hair Dryer comes with 2 different concentrator nozzles:
- one straight, narrow 60mm nozzle that is perfect for straightening because it lets you achieve the required tension on the hair
- one beveled, large 70mm nozzle for smoother blow-drying; it is slightly diagonal in shape, hugging the shape of the brush perfectly
GET TO KNOW YOUR HAIR DRYER
BODY & VOLUME
To create extra volume, turn the head upside down while drying. Position the
airflow toward the roots for maximum lift. When hair is dry, toss head back
gently and brush hair into place.
STRAIGHTENING
Work with hair in section when creating a super straight look. Using a large
round brush (approximately 2″ in diameter), hold hair taut in each section and
bend ends slightly under as you dry.
MAKING WAVES
Tousled, natural-looking waves are easily created by grasping hair at the
roots and scrunching between fingertips while drying.
*IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI NOW!**
Your local electrician can help you decide which type is best for you – a
portable unit that plugs into the electrical outlet or a permanent unit
installed by your electrician. The National Electrical Code now requires GFCIs
in the bathrooms, garages, and outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI?
- Electricity and water don’t mix. If your hair dryer falls into water while it’s plugged in, the electric shock can kill you… even if the switch is off.
- A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.
- A GFCI can save your life! Compared to that, the price is small! Don’t wait …install one now!
- GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the flow of electricity.
USER MAINTENANCE
Your dryer is virtually maintenance-free. No lubrication is needed. The dryer must be kept clean for proper operating performance. When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the dryer should be wiped clean with a cloth only. Blocked or clogged air intake vents will cause the dryer to overheat. If overheating occurs, an automatic safety device will shut the dryer or the heat off to prevent damage or personal injury. If the unit or the heat cycles off, turn the dryer off, unplug the cord, and allow the dryer to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.
CAUTION
- NEVER allow the power supply cord to be pulled, twisted, or severely bent.
- Never wrap the cord tightly around the dryer.
- Damage will occur at the high flex point of entry into the dryer, causing it to rupture and short.
- Inspect the cord frequently for damage. Stop use immediately if the damage is visible or the unit stops or operates intermittently.
- If the cord or dryer is damaged or does not operate properly, return it for repair to the place of purchase or to an authorized BaBylissPRO® service representative only.
- No repairs should be attempted by the consumer.
STORAGE – IMPORTANT
When not in use, your dryer should be disconnected, allowed to cool, and
stored in a safe, dry location, out of reach of children. Do not wrap the line
cord around the dryer. Allow the cord to hang or lie loose and straight at the
point of entry into the dryer.
LIMITED FOUR YEAR WARRANTY (U.S. ONLY)
BabylissPro will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed, together with your purchase receipt and $15.00 for postage and handling. (California residents need only provide proof of purchase and should call 1-800-326-6247 for shipping instructions.) In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BABYLISS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
SERVICE CENTER
- BabylissPro
- Service Department
- 7475 North Glen Harbor Blvd.
- Glendale, AZ 85307
- ©2016 Babyliss S.A.R.L.
- For information regarding BaBylissPRO
- Professional Products, visit us on the web at www.babylissus.com
- World headquarters: Paris, France
- U.S. headquarters: East Windsor, NJ
- US Service Center: 7475 N. Glen Harbor Blvd.,
- Glendale, AZ 85307
- Made in Italy
FAQs
Is the BaBylissPRO BPOR1 Nano Titanium Hair Dryer suitable for all hair types?
Yes, this hair dryer is designed for all hair types and is highly versatile in its performance.
What is the maximum power output of this hair dryer?
The BaBylissPRO BPOR1 Nano Titanium Hair Dryer operates at a maximum power output of 2000 watts, providing fast and efficient drying.
Does it have multiple heat and speed settings?
Yes, this hair dryer features multiple heat and speed settings, allowing you to customize your drying experience to your preference.
Is the hair dryer lightweight and easy to handle?
Absolutely, the Nano Titanium construction makes it lightweight and comfortable to hold, reducing arm fatigue during use.
Does it come with a concentrator nozzle attachment?
Yes, a concentrator nozzle attachment is included, which helps to direct airflow for precise styling and drying.
What is the advantage of Nano Titanium technology?
Nano Titanium technology generates far-infrared heat, which gently dries hair from the inside out, reducing damage and leaving hair smooth and shiny.
Is this hair dryer suitable for professional use?
Yes, the BaBylissPRO BPOR1 Nano Titanium Hair Dryer is designed for professional use and is a favorite among many hairstylists.
Can I use this hair dryer for creating various hairstyles?
Absolutely, it's versatile enough for everything from quick drying to intricate hairstyling thanks to its multiple settings.
Is it easy to clean and maintain?
Yes, it is easy to clean. Regularly clean the air intake grille and the filter to ensure optimal performance.
Does it have a cool shot button for setting hairstyles?
Yes, there is a cool shot button that releases a burst of cool air to set your hairstyle in place.
Is this hair dryer dual voltage for international travel?
No, it operates on a standard voltage and is not dual voltage, so you may need a voltage converter for international travel.
Is the cord long enough for easy maneuverability?
Yes, it comes with a long cord that provides ample reach and maneuverability while styling.
Is the hair dryer durable and built to last?
Yes, the Nano Titanium construction is durable and ensures a long lifespan for the hair dryer.
What safety features does it have?
It includes an overheat protection feature to prevent overheating during prolonged use, ensuring safety.
Can this hair dryer be used for daily styling without damaging hair?
Yes, when used correctly and with proper heat settings, it can be used for daily styling without causing excessive damage.
What is the warranty period for the BaBylissPRO BPOR1 Nano Titanium Hair Dryer?
The warranty period may vary, but it typically comes with a limited warranty. Check with the manufacturer or retailer for specific warranty details.
Video- Introduction of Product
Download This PDF Link: BaBylissPRO BPOR1Nano Titanium Italian Hair Dryer instruction manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>