Petwant F9 Smart WiFi Pet Feeder User Manual

August 10, 2024
petwant

Petwant F9 Smart WiFi Pet Feeder

Petwant F9 Smart WiFi Pet Feeder

THANKS FOR CHOOSING OUR AUTOMATIC PET FEEDER

Components

  1. Main Body

  2. Food Bowl

  3. USB cable

  4. Desiccant

  5. Manual

  6. Ceramic Bowl

Features

Features

Features

Parameters

Name Parameters
Product Name Smart Pet Feeder
Product Model F9-W
Dimension L284.5mm W184mm H342mm
Color Box Size L191.5mm W177mm H360mm
Material ABS, Ceramic
NW Around 2.2KG
Food Appliance 5~ 15mm Dry Food , freeze dried food
Pets Appliance Cats & Small size dogs
Capacity 3.SL
Power DC SV1A Adapter / 4 * D Size Batteries
Rated Voltage DCSV
Rated Power 0.5W
Working Temperature 5°C~S0°C

Setup and Assemble Feeder

Lift The Latch

Snap your fingers on the food bucket in the recessed position on the back.
Lift upward to open the lid

Place Desiccant

Rotate the desiccant box counterclockwise to tear off the outer package of desiccant Put the desiccant into the box and rotate it clockwise to close it.

Desiccant is not edible, Please keep it away from children, the elderly and pets.

Plug in Power Adapter

  1. Battery power supply: remove the battery cover by releasing the retaining clip, insert 4 good quality alkaline “D” batteries and reinstall the battery cover.
    Note: Please use safe and standard alkaline batteries. Do not mix batteries of different specifications and models.

  2. Power adapter supply: plug in the power adapter and connect the power cable into the card slot.

Install Food Bowl

Tilt the base unit back slightly, align the buckle of the food bowl with the base unit to install; the same step to disassemble.

Fill Pet Food

Open the lid, fill the hopper with a suitable quantity of dry food well in excess of a daily amount. To maintain maximum food freshness, we recommend that a maximum of 7 O days food is loaded.

Note: The device only support 5-1 Smm dry pet food.

Grain Size Self-check:

(Unit: mm)

Disassemble & Clean

Clean the Food Hopper

  1. Turn both knob locks to the unlocked position, unlock the food bucket.
    Disassemble & Clean

  2. To disassemble, hold both sides of the food bucket and lift upwards.

  3. Disassemble the impeller/ feeding slice and feeding mechanism.

  4. The main body of the feeder is not dish washer-safe. Do not immerse the main body in water, this could damage the internal electronics and cause the batteries to short out, create an electrical shock, or catch fire.

  5. Make sure all parts of the feeder are completely clean and dry before filling with food.

Assemble the Food Hopper

  1. Align food hopper with slots in the main body and press down.
    Disassemble & Clean

  2. Fix the feeding slice and impellers as the above picture shows. (Please pay attention to “+ “shape directions.)

  3. Align the impeller bottom cover with slots and rotate in anticlockwise direction until you hear the crack sound.

  4. Adjust the impeller and make the rubber parts cover the food outlet shows in the picture.
    Disassemble & Clean

If the impeller is not well fixed , it may cause the device not able to dispense the food.

Clean the Food Bowl

The food bowl is dishwasher-safe once removed from the main body.

Clean the Body

Use the dry soft cloth to wipe it, the body is not waterproof, please do not use wet cloth.

Replace the desiccant pack

Open the desiccant box cover and replace the desiccant pack. It is suggested to replace it every one or two months.

Replace Alkaline Batteries

Unplug and open battery lid at the bottom, then you can replace the batteries

Replace Alkaline Batteries

Take out the food hopper and empty the food hopper then fill the fresh food and proceed instant feeding once.

Warnings

  1. Please keep the food hopper dry after cleaning it.
  2. Please replace the food on a regular basis if your pets did not eat up.(For time period, please refer to the food packing instruction)
  3. Please clean and maintenance your device on a regular basis to prolong the using period of your pet feeder.

Replacing The Food Dispensing Accessory

The feeder comes standard with a 10g/portion. If you need to replace it with a 5g/portion, follow the steps below. After replacing the Accessory, proceed with the installation steps.

Disassemble & Clean

Open the APP interface, enter to the settings page, select “Dispensing Portion”, choose the equipped dispensing amount and click “Confirm” to finalize the replacement.

Set Up Your Pet Feeder

Get Access to APP

  1. Scan the QR code to download the APP;
  2. Register the account ;
  3. Power on the device and make sure the white indicator slowly flashes;
  4. Click the “+” button on the top right conner of the app and connect the decice following the on-screen instructions.

Download the APP

Note: Only 2.4Ghz is allowed and 5Ghz or mixed frequency is not fit for this device.

Set Up Your Programmed Feeding

The pet feeder will dispense the food based on the programmed feeding and users can receive the feeding notifications accordingly.

Reset Your Pet Feeder

If change the network, press and hold the“ ”button for 10 seconds till heard a prompt sound“ ” white indicator flash, reconnect the device with APP.

Remote Feeding

Enter device setting page and click “Feeding” , select servings and click Feed to complete the remote feeding.

Note: Users can not feed your pets via APP when powered by batteries.

Manual Feeding

Double-click the“ ”button to instant feed one serving .

More servings will be feed repeat the above steps

Attention: Can not manually feed on device if turn on the “Device Key Lock” on the APP

Display Panel

Set Up Your Pet Feeder

Double press : Instant feed one portion
Press and hold 10 second : Reset the

Set Up Your Pet Feeder

Indicator Information

| OFF| Working normally
---|---|---
Indicator| Lack of food & Food jamed
Motor brolcer
ON| Low batterry
| Quick Flash| Not powered
Battery supply
White Flash| Connecting device
White Slow Flash| Normal network
ON| Internet status

Safety Precautions

Read all instructions carefully before attempting to operate this device.

Ensure power supply

  1. Please check the power supply before going out.
  2. Device has RTC time saving function, timer will not stop working when switch off.
  3. Please pay attention to the battery display when powered by batteries, users need to replace the batteries when” ES:LP” shows on device screen;
  4. It’s suggested to replace the batteries once a year if you do not get the device work by batteries, for the power will be running off with time goes by.
  5. When powered by batteries, it is normal for the electric quantity icon to fluctuate occasionally because of the large transient current.

Keep Device

  1. Device need to be placed horizontally and firmly, it’s not allowed to tipped one side and rock or upside down.
  2. Keep device placed in a dry area and not expose the device under sunlight. Also not to place the feeder in a high place to avoid the damage from dropping.
  3. Do not remove any parts from the feeders beside food tray and food hopper.
  4. Do not place anything on the top of this feeder.
  5. Ensure there is no barriers near the food outlet to make the pets can be fed normally.

Caution

  • For indoor use ONLY.
  • Is NOT dishwasher safe. Hand clean only.
  • For dry food use ONLY. Works best with 5-15 mm food diameter or smaller.
  • NOT recommended for puppies or kittens less than 7 months old or unable to reach the feeding dish.
  • DO NOT use this feeder with puppies, kittens, dogs or cats with any physical disability.
  • Intended for use with dogs or cats ONLY.
  • DO NOT allow small children to play with, in or around feeder.
  • Before leaving for extended time, always replace Battery Backup with 3 new “D” size batteries.
  • DO NOT place any foreign objects in the feeder.
  • DO NOT operate feeder without Bowl, Food Hopper and Lid securely in place.
  • To avoid tripping, always keep power cord out of the way of foot traffic.
  • Feeder must be placed on a level surface.
  • DO NOT disassemble feeder other than Bowl, Lid and Battery Cover.
  • Dispose of all packaging material properly. Some items may be packed in poly bags; these bags could cause suffocation; keep away from both children and pets.
  • DO NOT attempt any repairs or modifications to the feeder.
  • Check with your veterinarian if you are unsure about the proper MEAL SIZE for your pet.

FAQ

What happened to your device| How to check by yourself| How to solve it
---|---|---
Unable to assemble the food hooper| Impellers not assembled properly| Cheek and assemble the impellers
Device Abnormal| Impurities inside food hopper| Clean the impurities inside of food hopper
Food size in app li cable| Ensure to use 5-1Smm dry food
Photelectric sensor faulty| Contact Aft er-sale Service
Motor faulty| Contact After-sale Service
Food Jam| Food excessive in food tray| Empty the food tray and set up the suitable servings for your pets
Food jammed in food outlet| Ensure to use 5-1Smm dry food
Food outlet got blocked by food| Remove and clean the food outlet
Food outlet is not clean| Use soft cloth to clean the food outlet
In frared Sensor Defective| Contact After-sale Service
Lack of Food| Lack of food| Supplement the food and instant feed once
Food hopper not fix well| Take out the food hooper and check if all the accessories are assembled properly
Device Offline| Device is in battery mode| Check if power cu t or power adapter is fixed properly
Network abnormal or something wrong with wifi| Please check if the WIFI is normal and re-connect the pet feeder
Mainboard Defective| Contact After -sale Service

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals