Zenox Rookie Series MK-II Gaming Chair User Guide
- June 17, 2024
- Zenox
Table of Contents
**Zenox Rookie Series MK-II Gaming Chair User Guide
**
SUPPORT
Contact us via email at aftersales@zenoxstore.com, or WhatsApp™ at +852 8481 7841
HEAVY
The product is considerably heavy, grab a friend and do the installation together if possible
CAUTION
Stop using the product with damaged parts.
Sit in the center of the chair, back against the backrest
Do Not Sit at the edge of the chair, as it will tilt the balance.
Do Not Stand on the chair, and use it as any form of stool or ladder.
Be Careful when using the recliner and other moving parts of chair
Avoid Direct Sunlight as it would cause fading and damage the upholstery.
Avoid Strong Chemicals or scrubbing excessively, as it would cause fading and damage the upholstery
Assemble Videos
www.zenoxstore.com/pages/assembly-guides
www.zenoxstore.com
(+852) 65634820
sales@zenoxstore.com
Package Content
A – 1 Set of Pillows (2pcs)
B -1 Backrest
C – 1 Seat assembly with armrests
D -1 Class-4 gaslift with covers
E -1 Wheelbase
F – 1 Set of casters (5pcs)
G -1 Tilt mechanism
H – 1 Set of backrest side covers (2pcs)
I – 1 Hex key
Bolts are pre-installed, remove and reuse
ANSTALLACTION ANSTRUCTION
Put together the base.
Side and align the backrest and seat.
Remove the bolts and install the telemechanism
Clip on the backrest side covers.
Put togther the seat base and pillows.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>