DAKOTA MICRO DM-2IS 7 inch AHD Waterproof Monitor User Manual
- June 5, 2024
- DAKOTA MICRO
Table of Contents
DM-2IS 7-inch AHD Waterproof Monitor
User Manual
Dakota Micro Single Camera to Dual Monitor Adapter Cable
AHD Waterproof Monitor
-
Dakota Micro PN: DM-2IS
-
The splitter cable is 21 inches long.
-
The splitter has one (1) video input with two (2) video outputs.
-
The splitter looks like this: A. 5-pin Male Switchcraft Connector (to Dakota Micro Monitor or Transmitter)
B. 5-pin Male Switchcraft Connector (to Dakota Micro Monitor or Transmitter)
C. 5-pin Female Switchcraft Connector (to AgCam®/ EnduraCam®/RazerCam® Camera) -
This splitter allows for a variety of different setups:
A. One (1) AgCam®/ EnduraCam®/ RazerCam® Camera into two (2) Dakota Micro Monitors.
B. One (1) AgCam®/ EnduraCam®/ RazerCam® Camera into one (1) Dakota Micro Monitor and (1) Dakota Micro Transmitter
C. One (1) Dakota Micro Receiver into two (2) Dakota Micro Monitors. -
Warranty on this item is 1 year from the date of purchase.
DAKOTA MICRO, INC. LIMITED WARRANTY
Subject to the disclaimer, limitations, and other directions stated hereafter,
Dakota Micro, Inc. warrants that the Product will be free from defects in
material and workmanship for periods as stated hereafter from the date of
original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO
THE REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY,
DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE,
INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral
statements or representations made by anyone which are contrary to or at
variance with the terms stated in this LIMITED WARRANTY are void.
Dakota Micro, Inc. will, at its option, either repair the defect or replace
the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period of three (3)
years for AgCam®/EnduraCam® and InnoPro® cameras; two (2) years for
AgCam®/EnduraCam® monitors, and Wireless components; Twelve (12) Months for
all Overview® and RazerCam® Cameras & Monitors, cables and all other
accessories.
The Dakota Micro, Inc. limited warranty periods outlined above apply
throughout the United States and Canada only. A one (1) year maximum limited
warranty for all Products applies to all other geographic locations unless
otherwise stated in writing by Dakota Micro, Inc.
This limited warranty does not apply to any issues connected with an
appearance that has no relation to the performance of the Product nor to any
Product the exterior of which has been damaged or defaced, which has been
subjected to improper voltage or another misuse, abnormal service or handling,
or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser
should follow the process set forth in the Product Warranty/Repair Process,
and provide proof of purchase to Dakota Micro, Inc.
Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other
person is authorized to make any warranties other than those described herein
or to extend the duration of any warranties beyond the time periods described
herein.
The warranties described herein shall be the sole and exclusive warranties and
remedies provided by Dakota Micro, Inc. Correction of defects, in the manner
and for the period of time described herein, shall constitute complete
fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to
the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or
in any way responsible for any damages or defects in the Product which were
caused by repairs or attempted repairs performed by anyone other than Dakota
Micro, Inc.
Some states do not allow the limitation or exclusion of incidental or
consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or another judicial proceeding for the
enforcement of any right provided for herein or otherwise, or with respect to
any claim that a purchaser may have against Dakota Micro, Inc. shall be
instituted only in the Courts of the State of North Dakota, either in the
state district court located in Wahpeton, North Dakota or in Federal District
Court located in Fargo, North Dakota. Without regard to conflicts of law
principles, the laws of the state of North Dakota shall govern the
interpretation and enforcement of the terms of this Limited Warranty and all
aspects of the relationship between Dakota Micro, Inc., and the purchaser.
This warranty gives you specific legal rights and you may also have other
rights, which may vary from state to state.
Disclaimer
Dakota Micro Inc. products, specifications, pricing, and programs are subject
to change without prior notice. Dakota Micro Inc. reserves the right to make
design changes at any time without the obligation to retroactively install
them on previously sold units.
8659 148½ Ave. SE.
Cayuga, ND 58013
Management System Registered to ISO 9001
www.dakotamicro.com
Author: SJE
Rev. By: SJE
Rev Date: 04/07/22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>