tala Brass Triple Pendant with Voronoi II Suspension Lamp User Guide

tala Brass Triple Pendant with Voronoi II Suspension Lamp

• Thoughtful lighting, responsibly designed in London.
• Thank you for making the switch to Tala.
• Discover the full Tala family at tala.co.uk

BEFORE STARTING

We advise the fitting of our Canopy and Pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keep them for future reference. Please take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth. If your lighting circuit does not have an earth, ask a qualified electrician to provide an earth facility. This light fitting is suitable for indoor use only. This fitting operates on 240V mains voltage. Please visit our website to see our recommended dimmers.
WARNING
Always switch off electricity supply at the mains during installation and maintenance. We recommend that the fuse is withdrawn or the circuit breaker is switched off whilst work is in progress. Do not just turn off at the wall switch. All fittings must be installed in accordance with current Building Regulations and IEE Wiring Regulations.

RECOMMENDED EQUIPMENT

• Small flat head screwdriver
• Wire strippers
• Insulation tape
•  M10 (17mm) (5/8IN) spanner or Adjustable spanner Further equipment may be required for fixing to your ceiling.

TRIPLE PENDANT – PROVIDED COMPONENTS

• A. x1 Ceiling Bracket
• B. x1 Ceiling plate
• C. x1 M10, Internal tooth washer
• D. x1 Nut
• E. x3 Tala Pendants
  Oak, Walnut, Brass or Graphite

INSTALLATION INSTRUCTION

• STEP 1 : Attach to the ceiling using screws and plug. Always choose screws and plugs that are appropriate for the ceiling.

• STEP 2: Thread all three pendant cables E though ceiling plate cord grips B.

• STEP 3: Pull pendant cables through cord E grips to yB our desired length. Using a flat head screwdriver, tighten set screws B1 to secure them.

• STEP 4: Cut off excess cable and strip wires to expose the copper core. Maintain all double insulation.

• STEP 5: Connect the pendants, plate and mains wiring as shown.

• STEP 6: Move B up onto A. Use toother washer C and nut D to secure it in place.
  Do a final tighten with the correct spanner.

• STEP 7: Screw bulbs into pendants E clockwise.

PENDANT DISPLAY GUIDE

ADJUSTING THE CORD

• To adjust the cord to your desired length, using a flat head screw driver, loosen  the grub/ 1set screw and push the  cable up into the ceiling plate.
• Secure the cable in place by re-tightening the grub screw. Maintain all double insulation.

MINIMUM CORD LENGTH A
For all bulbs shortest recomended cord length is 300m

DISTANCE BETWEEN PENDANTS B
Recomended minimum distance between pendant, dependant on bulb style, are as follows:

• Voronoi I – 150mm
• Voronoi II – 200mm
• Voronoi III – 350mm
• Basalt – 100mm
• All other bulbs – 100mm

PENDANTS – RECOMMENDED CABLE LENGTHS

• SCENARIO 1
  Above a coffee or dining table, or where height is required for seated tasks

• SCENARIO 2
  Above side tables, or where height is required for storage

• SCENARIO 3
  Above a kitchen island or bar, or where height is required for standing tasks

• SCENARIO 4
  Above a stairwell or walkway, or where height is required for walking underneath

CARE AND CLEANING

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish of the product.

WARRANTY AND AFTER-CARE

• This product has a three-year warranty. Within this time  we will replace any parts that have functional defects.
• Please report any faults by emailing: customerservice@tala.co.uk

Join the Community

• Instagram: @tala
• Facebook: talaHQ
• Pinterest: TalaLED
• Tag: lighttoliveby
• Tala Studios, 25B Vyner Street, London E2 9DG
• +44 20 3026 3246
• hello@tala.co.uk

References

• Tala | Shop Official Tala® Lighting | Light to Live By

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>