timberk T-FH1500-H11MC Electric Fan Heater Instruction Manual
- June 12, 2024
- TIMBERK
Table of Contents
- 1. IMPORTANT INFORMATION
- 2. SAFEGUARDS
- 3. APPOINTMENT OF THE DEVICE
- 4. SPECIFICATIONS
- 5. DELIVERY SET
- 6. DEVICE DESCRIPTION
- 7. OPERATION OF THE DEVICE
- 8. CLEANING AND MAINTENANCE
- 9. TROUBLESHOOTING
- 10. STORAGE
- 11. UTILIZATION RULES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
timberk T-FH1500-H11MC Electric Fan Heater Instruction Manual
Dear customer!
We thank you for your wise choice and for a purchase of an electric fan heater. It will serve you for a long time.
1. IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not responsible for damage of the appliance or its parts
during transportation, as a result of incorrect installation or voltage
fluctuations, as well as when any part of the appliance has been changed or
modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
2. SAFEGUARDS
When using an electric fan heater, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.
- Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
- Do not use outdoors.
- Always unplug the appliance from the power supply before cleaning and when not in use.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.
- Do not use the appliance in immediate proximity to bath, shower or swimming pool.
- Do not place appliance or parts near an open flame, cooking or other heating appliances.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not leave the appliance switched on when not in use.
- If the power cord is damaged, it must be replaced by the manufacturer or its authorized service center or similarly qualified personnel to avoid a hazard.
- Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
- Keep the cord away from sharp edges and hot surfaces.
- Do not pull, twist, or wrap the power cord around appliance.
- Never insert fingers, pencils or any other object through the guard when the appliance is operating.
- To reduce the risks of electric shock do not switch the appliance by wet hands.
- For repair or accessories, contact an authorized service center only.
- Operating unit should be not closer than 0.9 m to flammable or easy deformable under high temperature objects.
- It is forbidden to install the device directly next to or under an electrical outlet or under a conducted electric cable. This can lead to overheating of them, which will create an emergency situation
- If, however, the airflow is inadvertently obstructed during use, the built-in thermal safety cutout will automatically switch off the appliance.
- CAUTION : Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- Do not use the fan heater in rooms less than 4 m2 area.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on. 28. Explanation of warning signs:
Attention! Do not cover
3. APPOINTMENT OF THE DEVICE
Fan heaters are intended for space heating and for creation of comfortable environment indoors during cold seasons. Fan heater must be installed vertically on a flat and solid surface. This device is easy to use and install, also it is efficient and economical due to minimal energy loss, increased heat transfer and efficient distribution of air flow.
4. SPECIFICATIONS
5. DELIVERY SET
1. Fan heater – 1 pc.
2. User manual 1 pc.
3. Warranty card – 1 pc.
4. Package – 1 pc.
6. DEVICE DESCRIPTION
*The image is provided as a reference and may differ from the actual instrument
1. Thermostat control switch
2. Heat select switch
3. Air outlet grille
4. Base
5. Handle
6. Power cord
7. OPERATION OF THE DEVICE
- Set the thermostat to minimum position.
- Set the mode switch to minimum position 0.
- Insert the plug to the power supply.
- MODE CONTROL
- Set the mode switch to the required position:
- 0 – Off;
- Fan (airflow without heat);
- 1 – Warm airflow (900 W);
- 2 – Hot airflow (1500 W).
THERMOSTAT
- If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to lower the temperature and counterclockwise to arise it.
- When the ambient temperature raises to satisfying level, slowly turn the thermostat counterclockwise until the fan heater will switch off. The room temperature thus will be kept at the set level.
- The heater is equipped with overheating protection. When the device overheats, the temperature limiter will disconnect the power from the heating element and automatically turn it on after the heating element cools down. Overheating of the device can be caused by dust contamination of the inlet or outlet grilles, their overlapping, also when the thermal power of the device exceeds the heat loss of the room in which it is used. If the overheating protection is often activated, it is necessary to clean the inlet or outlet grilles from dust or to remove foreign objects blocking the air inlet and/or outlet. If after the above steps the frequent operation of the overheat protection continues, you must contact an authorized service center.
- To turn off the device, set the power mode switch to “O”.
TIP OVER SWITCH
Your heater is designed to automatically shut the heater off when tipped
forward or backward. The unit will automatically turn on once it is returned
to its normal upright position.
Do not use on thick and long pile carpets, as the heater may not work, due the tip over switch not been activated.
8. CLEANING AND MAINTENANCE
Make sure that the appliance is de-energized before starting preventive cleaning.
Recommendations for regular cleaning:
Disconnect the appliance from the mains by unplugging the power cord from the
electrical outlet, allow the appliance to cool down, then wipe the housing
with a soft, slightly damp cloth. For cleaning, it is not recommended to use
detergents, including those with abrasive compositions.
Do not damage the surface of the appliance with sharp objects.
9. TROUBLESHOOTING
If it is impossible to fix these malfunctions with these methods, contact the authorized service center.
10. STORAGE
Make sure that the appliance body and its heating element have cooled down before the appliance is dismantled and packed in its packaging for long-term storage.
Complete all requirements of chapter CLEANING AND MAINTENANCE.
Reel on the power cord.
When the device is not in use for a long time, store it in a cool, dry place in the original cardboard box.
11. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance
with the laws, rules and methods in region of recycling. Detailed information
about the recycling of the device, you can receive from a representative of
the local authorities, after providing full information about the device. The
manufacturer and authorized organization of the manufacturer do not carry
responsibility for the fulfillment by the Buyer of the requirements of
legislation on utilization and methods of utilization of the device selected
by the Buyer. The lifetime of the device is indicated in the warranty card.
Warranty period for the device and warranty terms are specified in the
warranty card. The warranty card is an integral part of the documentation
supplied with this unit. If there is no warranty card in the delivery set, ask
for it from the Seller. The warranty card provided by the Seller must conform
to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove
responsibility for any possible harm which can be caused to people, animals or
property directly or indirectly, if this harm occurred as a result of
noncompliance with the rules and operating conditions, installation of the
device, intentional or reckless actions of the user- and / or third parties,
as well as in situations caused by natural and / or anthropogenic accidents.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>