tala BSALT-I-SET-TRI-PD-01-US Basalt Triple Pendant Installation Guide
- June 3, 2024
- TALA
Table of Contents
INSTALLATION GUIDE
Basalt Triple Pendant
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
BEFORE STARTING
We advise the fitting of our ceiling rose and pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keep them for future reference. Please take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth. If your lighting
circuit does not have earth, ask a qualified electrician to provide an earth
facility. This light fitting is suitable for indoor use only. This fitting
operates on 120V mains voltage. Please visit our website to see our
recommended dimmers.
WARNING
Always switch off the electricity supply at the mains during installation and
maintenance. We recommend that the fuse is withdrawn or the circuit breaker is
switched off whilst work is in progress. Do not just turn off at the wall
switch. All fittings must be installed in accordance with the current NFPA 70,
National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
– Small flat-head screwdriver
– Wire strippers
– Insulation tape
– M10 (17mm) (5/8IN) wrench or Adjustable wrench
Further equipment may be required for fixing to your ceiling.
SKU – BSALT-I-SET-TRI-PD-01-US
SKU – BSALT-I-SET-TRI-PD-02-US
BASALT TRIPLE PENDANT – COMPONENTS
STEP 1
Attach to the ceiling using screws and a plug. Always choose screws and plugs
that are appropriate for the ceiling.
STEP 2
Thread all three pendant cables through ceiling plate cord grips.
STEP 3
Pull cables through to your desired length. Using a flathead screwdriver,
tighten the set screws to secure them. 
STEP 4
Cut off excess cable and strip wires to expose the copper core. Maintain all
double insulation. 
STEP 5
Connect the pendants, plate and mains wiring as shown.
STEP 6
Move up onto.
Use another washer and nut to D to secure it in place. Do a final tighten with
the correct spanner. 
STEP 7
Lift the metal sleeve and screw in the bulb firmly. Take care not to let the
metal sleeve falls onto the bulb
STEP 8
Rotate the metal sleeve To align with the bulb F Carefully lower the metal
sleeve onto the bulb. you can now make and final tweeks to the alignment of
the bulb and sleeve.
PENDANTS DISPLAY GUIDE
MINIMUM CORD LENGTH
For all bulbs shortest recommended cord length is 14 in.
DISTANCE BETWEEN PENDANTS
The recommended minimum distance between pendants is 4 in. 
PENDANTS – RECOMMENDED CABLE LENGTHS
SCENARIO 1
Above a coffee or dining table, or where height is required for seated
tasks
SCENARIO 2
Above side tables, or where height is required for storage
SCENARIO 3
Above a kitchen island or bar, or where height is required for standing
tasks
SCENARIO 4
Above a stairwell or walkway, or where height is required for walking
underneath
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish of the product.
WARRANTY AND AFTER-CARE
This product has a three-year warranty. Within this time we will replace any
parts that have functional defects.
Please report any faults by emailing:
[email protected]
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag:
lighttoliveby
Tala North America, 68 Jay Street, #602, Brooklyn, NY 11201 |
+1929-294-9574 |
[email protected]