tala The Muse Portable Lamp User Guide

: June 3, 2024
: TALA

Table of Contents

tala The Muse Portable Lamp
PREPARATION
THE MUSE-PROVIDED COMPONENTS
INITIAL SET UP
CHARGING THE MUSE
BATTERY LEVEL INDICATOR
CARE AND CLEANING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tala The Muse Portable Lamp

tala-The-Muse-Portable-Lamp-PRODUCT

Thoughtful lighting, responsibly designed in London. Thank you for making the switch to Tala. Discover the full Tala family at tala.co.uk

PREPARATION

Please read instructions thoroughly before installation and keep them for future reference. Improper assembly can undermine the safety and longevity of the product.
IMPORTANT
All packaging must be removed and bulb carefully screwed in before turning on. The product is designed to work with the Tala 12V LED bulb provided. Do not use alternative bulb as product will not work effectively. For replacements, visit the Tala website or contact us for assistance. Avoid turning on product in hot temperatures above 35ºC. Doing so will reduce lumen output and bulb lifespan. To reduce risk of scratches or markings, ensure bulb is fully housed in the glass case unless changing the bulb.
WARNING
The Muse is not suitable for recessed or enclosed fixtures or environments and should be displayed as instructed. Do not leave the product under direct sunlight while switched on. Ensure all fixings are tightly sealed and do not allow internal components and surfaces to be exposed to water.

THE MUSE-PROVIDED COMPONENTS

tala-The-Muse-Portable-Lamp-
FIG-1

A x 1 The Muse luminaire with LED bulb
B x 1 2mm Hex Key
C x 1 USB Type-C Charging cable

Handle
Lid
12V LED bulb
Dimmer dial
Base
Battery charge level button
USB Type-C power input
Battery charge level Indicator lights

INITIAL SET UP

STEP 1

Release the two screws on the lid with the provided Hex key and remove the handle.

STEP 2

Lift off the lid 2 and carefully remove the packing material from the inside.

STEP 3 Ensure the bulb is screwed in fully and contact is made between the base of the bulb and the housing. The bulb and housing are both safe to touch. Be careful to align the bulb properly and do not over-tighten.

STEP 4 Return the lid and handle back to the original position. Tighten the screws with the provided Hex Key B to secure the handle in place

STEP 5

To turn it on, rotate the dial on the front of the lamp clockwise until the bulb lights up. Adjust the dimmer for your desired light output. Dial the dimmer up for a cool white light, and dial down for a warm, ambient color temperature.

CHARGING THE MUSE

OPTION 1: WIRED CHARGING
Insert the provided USB Type-C charging cable into the input at the back of the lamp base and plug it into a USB Type-A adapter. For optimum charging, use the 0.5m charging cable provided and a 2-Amp USB Type-A adapter.

OPTION 2: WIRELESS CHARGING
Place assembled product flat on a compatible wireless charging pad and ensure it is placed on the center of the pad for effective charging.
When charging correctly, the battery charge level indicator lights Total charging time is 8 hours wired or 10 hours wireless. will start blinking.

BATTERY LEVEL INDICATOR

tala-The-Muse-Portable-Lamp-
FIG-10

IMPORTANT
The Muse uses a Lithium-ion battery pack rated for 1000 full charge/discharge cycles. After this, the battery capacity may begin to noticeably degrade.
Tips to prolong the battery life are:

Once fully charged, please remove it from charger
Avoid letting The Muse reach 0% battery, when the low battery indicator starts blinking, it should be recharged
When not in use, store The Muse with between 25-50% battery (1-2 indicators on)
During charging, make sure The Muse is uncovered to avoid over-heating
Depending on your charger power output, The Muse may not always charge to 100% if the bulb is on at the same time

The battery, bulb, and glass can all be easily replaced. For replacement parts, please visit our website or contact us at customerservice@tala.co.uk

CARE AND CLEANING

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish of the product. Do not use alcohol or other solvents.
Extended use in wet or humid locations can cause condensation to form inside the glass tube. Please follow the ‘Initial Set-Up’ steps to open the lid and allow condensation to evaporate. To avoid condensation, it is recommended that the lamp is not exposed to wet weather for long periods, such as left out in the rain overnight
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a functional defect with the product during this time, please contact our team at customerservice@tala.co.uk.
REGISTER YOUR PRODUCT
Extend your warranty on this product to up to five years – free of charge.
Scan the QR code below to register:

This symbol indicates that electrical and electronic equipment (WEEE) should not be mixed with general household waste. For recovery and recycling, please take this product to a designated collection point where it will be accepted free of charge. Many retailers offer this in-store. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment.

Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG |hello@tala.co.uk
Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands
Tala North America, Inc. P.O. Box 89 1051, Port Washington Blvd. Port Washington, NY 11050, USA

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution; changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.