tala DWS-ECHO-CDL-01-US Echo Chandelier Installation Guide
- June 3, 2024
- TALA
Table of Contents
ECHO-CDL-01-US Echo Chandelier
Installation Guide
DAVID WEEKS FOR TALA
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
We advise the fitting of this ceiling rose and pendant to be performed by a
qualified electrician. Please read through these instructions before
commencing work, and keep them for future reference. Please take extreme care
when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth. If your lighting
circuit does not have an earth, ask a qualified electrician to provide an
earth facility. This light fitting s suitable for indoor use only. This
fitting operates on 120V mains voltage.
WARNING
Always switch off electricity supply at the mains during installation and
maintenance. We recommend that the fuse is withdrawn or the circuit breaker is
switched off whilst ork is in progress. Do not just turn off at the wall
switch. All fittings must be installed in accordance with current NFPA 70,
National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
– Small flat head screwdriver
– Wire strippers
– Insulation tape
Further equipment may be required for fixing to your ceiling. Please visit our
website to see our recommended dimmers.
Echo Chandelier Provided Components
A x1 Ceiling Bracket
B x1 Ceiling Plate
C x1 Chandelier
D x7 Tala Sphere IV bulbs
E x2 Flat head bolts
- Suspension cord
- Power cable
- Cable grip
STEP 1
Adjust the Suspension Cord 1. to your desired height by pulling it through the
grip in the centre of the bracket.
Attach A to the ceiling using screws and plug. Always choose screws and plugs
that are appropriate for the ceiling.
STEP 2
Adjust the Cable 2 to your desired length.
Using a flat head screw driver, tighten ‘grub/set screw’ on the cable grip 3 .
This will secure the cable in place.
Maintain all double insulation.
STEP 3
First identify your household wiring using current Building Regulations and
NFPA 70, National Electrical Code (NEC). Attach the pendant wiring to your
household supply shown. Use an appropriate junction box.
STEP 4
Fasten part A to part B using the bolts E provided.
At this stage, final adjustments can be made to the suspension cord and
electrical cable length.
STEP 5
Carefully insert your bulbs into the chandelier rotating each clockwise until
tight. Take care not to tighten too much to avoid breakage.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish of the product.
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a functional
defect with the product during this time, please contact our team at
customerservice@tala.co.uk.
Please note, the flexible cable attached to this luminaire cannot be replaced;
if the cable is damaged, recycle the luminaire and seek a replacement.
Join the Community
Instagram: @tala/Facebook: talaHQ/Pinterest: TalaLED/Tag: lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG |
hello@tala.co.uk
Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850