tala Linear Triple Pendant Installation Guide
- June 3, 2024
- TALA
Table of Contents
**tala Linear Triple Pendant Installation Guide
**
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
PRODUCT OVERVIEW
BEFORE STARTING
We recommend the installation of this light fitting is performed by a qualified electrician. Please read the instructions before commencing work, and keep them for future reference. Take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth. If your lighting
circuit does not have an earth, ask a qualified electrician to provide an
earth facility. This light fitting is suitable for indoor use only. This
fitting operates on 120V mains voltage. Please visit our website to see our
recommended dimmers.
WARNING
Always switch off electricity supply at the mains during installation and
maintenance. We recommend that the fuse is withdrawn or the circuit breaker is
switched off whilst work is in progress. Do not just turn off at the wall
switch. All fittings must be installed in accordance with current NFPA 70,
National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Small flat head screwdriver
- Wire strippers
- Insulation tape
- 17mm wrench or adjustable wrench
Further equipment may be required for fixing to your ceiling.
Linear Triple Pendants – Provided Components
-
A. x1 Ceiling Bracket
-
B. x1 Linear Canopy pre-wired with three Tala Pendants
-
C. x2 M10, Internal tooth washer
-
D. x2 Nut
-
E. Screws and Rawl Plugs
(Always use screws and plugs that are appropriate to the ceiling)
Installation Instructions
STEP 1
Attach A to the ceiling using screws and plugs. Always choose screws and
plugs that are appropriate for the ceiling.
STEP 2
Using the carabiner clips, attach B to and allow the canopy to A hang
on the suspension cables.
STEP 3
Pull pendant cables B1 through cord grips B2 to your desired length.
Using a flat head screwdriver, tighten set screws B3 to secure them.
Tidy the excess cable into the Linear Canopy.
STEP 4
If necessary, cut off excess cable and strip wires to expose the metal core.
Then, re-wire pendants into the Ceiling plate. Maintain all double insulation.
Connect the Ceiling Bracket A to the Mains Electricity as shown
STEP 5
Move B up onto A and secure using the C and D as shown.
STEP 6
Screw in bulbs clockwise into the pendants.
PENDANT DISPLAY GUIDE
MINIMUM CORD LENGTH A
For all bulbs shortest recommended cord length is 14 in
PENDANTS – RECOMMENDED CABLE LENGTHS
SCENARIO 1
Above a kitchen island or bar, or where height is required for standing tasks.
SCENARIO 2
Above a coffee or dining table, or where height is required for seated tasks.
SCENARIO 3
Above a stairwell or walkway, or where height is required for walking
underneath..
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish of the product. Do not use alcohol or other solvents.
WARRANTY AND AFTER-CARE
This product has a two-year warranty. Within this time we will replace any
parts that have functional defects.
Please report any faults by emailing:
[email protected]
Support
Join the Community
[email protected]
Instagram: @tala
Facebook: talaHQ
Pinterest: TalaLED
Tag: lighttoliveby
Tala North America, Inc., 2 Research Place, Suite 300, Rockville, MD 20850,
United States of America