tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light Installation Guide

: June 1, 2024
: TALA

Table of Contents

Pendant Light Components
WARRANTY AND AFTER-CARE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light Installation Guide

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - product
image

Thoughtful lighting, responsibly designed in London.

Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk

BEFORE STARTING

We advise the fitting of our ceiling rose and pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keep them for future reference. Please take extreme care when carrying out these instructions.

IMPORTANT

This light fitting must be connected to the supply earth. If your lighting circuit does not have an earth, ask a qualified electrician to provide an earth facility. This light fitting is suitable for indoor use only. This fitting operates on 120V mains voltage. Please visit our website to see our recommended dimmers.

WARNING

Always switch off electricity supply at the mains during installation and maintenance. We recommend that the fuse is withdrawn or the circuit breaker is switched off whilst work is in progress. Do not just turn off at the wall switch. All fittings must be installed in accordance with current NFPA 70, National Electrical Code (NEC).

RECOMMENDED EQUIPMENT

– Screwdriver
– Wire strippers
– Insulation tape
Further equipment may be required for fixing to your ceiling

Pendant Light Components

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - Pendant Light
Components

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - Remove the junction
box

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - Slide the
Shade

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - appropriate for the
ceiling

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - Maintain all double
insulation

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - House hold
Mains

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - bolts
provided

Tala BWR-PD-LRG-AA-XX-01 Bower Pendant Light - Insert your bulb into the
lampholder

WARRANTY AND AFTER-CARE

This product has a two-year warranty. If there appears to be a functional defect with the product during this time, please contact our team at customerservice@tala.co.uk.

Please note, the flexible cable attached to this luminaire cannot be replaced; if the cable is damaged, recycle the luminaire and seek a replacement.

Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Energy Ltd. 25B Vyner Street, London E2 9DG | hello@tala.co.uk
Tala North America, Inc. 909 Rose Avenue, Suite 660 North Bethesda, MD 20852,
United States | www.tala.co.uk