tala Basalt Pendant Light Installation Guide
- June 3, 2024
- TALA
Table of Contents
tala Basalt Pendant Light
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
We advise the fitting of our ceiling rose and pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keep them for future reference. Please take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth.
If your lighting circuit does not have an earth, ask a qualified electrician
to provide an earth facility. This light fitting is suitable for indoor use
only. This fitting operates on 120V mains voltage. Please visit our website to
see our recommended dimmers.
WARNING
Always switch off electricity supply at the mains during installation and maintenance. We recommend that the fuse is withdrawn or the circuit breaker is switched off whilst work is in progress. Do not just turn off at the wall switch. All fittings must be installed in accordance with current NFPA 70, National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Screwdriver
- Wire strippers
- Insulation tape
Further equipment may be required for fixing to your ceiling
Scan me for more technical help
FOR INDOOR USE ONLY
SKU – BSALT-I-SET-SGL-PD-01-US SKU – BSALT-I-SET-SGL-PD-02-US
Pendant Components
- A x1 Ceiling Rose with Cable
- B x1 Basalt Pendant
- C x1 Basalt Bulb
- D x1 Ceiling Bracket
- E x2 Bolts M4
- F x1 Grub/Set Screw
- G Screws and Rawl plugs
STEP 1
- Attach bracket D to your ceiling using screws and plug.
- Always choose screws and plugs that are appropriate for the ceiling type.
STEP 2
Adjust the cord to your desired length. Using a flat head screw driver,
tighten ‘grub/set screw F
- This will secure the cable in place.
- Cut off excess cable and strip wires to expose the copper core.
- Maintain all double insulation.
STEP 3
- First identify your household wiring using NFPA 70, National Electrical Code (NEC).
- Attach the pendant wiring to your household supply as shown.
- Use an appropriate junction box.
STEP 4
Fasten the ceiling rose A onto the ceiling bracket D using the bolts provided E
STEP 5
Lift metal sleeve F and screw in the bulb firmly. Take care not to let the
metal sleeve fall onto the bulb.
STEP 6
Carefully lower metal sleeve F onto the bulb and rotate until the sides of the
sleeve align with the bulb.
Make any final adjustments before switching on the lights
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a functional
defect with the product during this time, please contact our team at
customerservice@tala.co.uk.
Please note, the flexible cable attached to this luminaire cannot be replaced;
if the cable is damaged, recycle the luminaire and seek a replacement.
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Energy Ltd. 25B Vyner Street, London, E2 9DG |
hello@tala.co.uk
Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>