335253 Video Intercom Bticino Monitor Additional Easykit Wifi 7 Inches Instruction Manual
- June 1, 2024
- bticino
Table of Contents
335253 Video Intercom Bticino Monitor Additional Easykit Wifi 7 Inches
Dimensional Data
- Recommended height, unless different regulations are specified.
Assembly
Disassembling
Available functions
Door opening
Gate opening
Intercom
Automatic switching on of the entrance panel
Entrance panel scrolling
Light switching on
Ringtone exclusion
Audio and video adjustments
Forwarding of call to a smartphone
Front view
-
7 ” (16:9) display
-
Door lock release pushbutton (L+/L- connector)
-
Answer key / Intercom key (available only with internal unit)
-
Scrolling/entrance panel activation key
-
Gate lock release pushbutton (G+/G- connector)
-
Light pushbutton (+/- connector)
-
Bell exclusion notification LED
Red LED flashing: bell excluded -
Wi-Fi signal notification LED
Red LED flashing: WI-FI on but not connected to the network
LED off: WI-FI disabled or working correctly
Red LED steady: Connected Indoor unit is exchanging data with the Home + Security App (auto-switching ON) -
Joystick for adjustments ans programming
Note: when idle, the door opening, gate opening and light control will act on the main Entrance Panel (MD). However, during an audio video communication they will act on the communicating entrance panel.
Back view
- Microphone
- Mini USB socket for device Firmware update
- D1 – D2 removable connection clamps for connection of the entrance panel or previous internal unit
- Micro switch for family 1 / family 2
- Master / Slave micro switch
- R1 – R2 removable connection clamps for connection of the additional internal unit
- Speaker
- DC30V 30W power supply
Wi-Fi Installation
Note: it is recommended that the Connected Indoor unit is installed near
the Wi-Fi router.
Note: it is possible to connect just one Connected Indoor unit for each
Wi-Fi (SSID) network to the Home + Security App
Note: it is possible to connect just one Connected Indoor unit for each
apartment to the Home + Security App
Configuration
For device configuration and installation and for any other information, refer
to the documentation that can be downloaded from the website.
Note: This device includes the Open Source software. For license and
software information, connect your Windows/Linus PC to the device through the
mini-USB port.
| |
---|---|---
www.homesystemslegrandgroup.com|
Download the Home + Security App
Technical Data
Power supply from SCS BUS | DC30V 30W |
---|---|
Maximum cable section for each clamp | 2 x 1 mm2 |
Operating temperature | 5 – 40 °C |
Read carefully before use and keep for future reference
Touching the units with wet hands is forbidden.
Using liquid cleaners or aerosols is forbidden.
Blocking the ventilation openings is forbidden.
Modifying the devices is forbidden.
Removing protective parts from the devices is forbidden.
Exposing the unit to water drops or splashes is forbidden.
Installing the units near heat/cold sources is forbidden.
Installing the units near harmful gases and powders is forbidden.
Danger of
electrical shock
Fastening the units on unsuitable surfaces is forbidden.
Risk of
devices falling because the surface on which they are installed collapses or
inappropriate installation.
Switch the power supply OFF before any work on the system.
Remote operation may cause damage to people or property.
Caution:
Installation, configuration, starting-up and maintenance must be performed
exclusively by qualified personnel.
Check that the wall installation has been carried out correctly according to
the installation instructions.
Check that the unit installation complies with the standards in force.
Connect the power supply wires as indicated.
Use only the items indicated in the technical specifications for any system
expansions.
Customer Support
Hereby BTicino S.p.A., declares that the radio equipment 335253 Connected
Indoor unit is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.bticino.it/red