bticino 346040 ECO Power Supply Instructions

June 9, 2024
bticino

bticino 346040 ECO Power Supply

DIMENSIONS

bticino-346040-ECO-Power-Supply-fig-1

Front view

bticino-346040-ECO-Power-Supply-fig-2

  1. Primary input connection clamps
  2. Clamps (BUS) for connection to the BUS/SCS
  • This is a CAT II 2500 V power supply and therefore it needs additional external transient voltage protection (higher than the voltages of the design overvoltage category).
  • The power supply must only be installed inside switchboards suitable for DIN devices.
  • The device is only suitable for indoor installation.
  • An omnipolar switch with minimum 3 mm distance between contacts must be installed near the power supply.
  • The switch described above should be considered as a device for the disconnection of the power supply unit from the power mains.
  • Do not weld the ends of the conductors that are inserted into the terminals.

Technical data

bticino-346040-ECO-Power-Supply-fig-3

Warnings and consumer rights

  • Read carefully before use and keep for future reference.
  • Touching the units with wet hands is forbidden.
  • Using liquid cleaners or aerosols is forbidden.
  • Blocking the ventilation openings is forbidden.
  • Modifying the devices is forbidden.
  • Removing protective parts from the devices is forbidden.
  • Exposing the unit to water drops or splashes is forbidden.
  • Installing the units near heat / cold sources is forbidden.
  • Installing the units near harmful gases and powders is forbidden.
  • Fastening the units on unsuitable surfaces is forbidden.

Danger of electrical shock.

  • Risk of devices falling because the surface on which they are installed collapses or inappropriate installation.
  • Switch the power supply OFF before any work on the system.

Caution: Installation, configuration, starting-up and maintenance must be performed exclusively by qualified personnel.

  • Check that the wall installation has been carried out correctly according to the installation instructions.
  • Check that the unit installation complies with the standards in force.
  • Connect the power supply wires as indicated.
  • Use only the items indicated in the technical specifications for any system expansions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

bticino User Manuals

Related Manuals