EUFAB 17467 Magnetic Mobile Phone Holder for Mounting to Ventilation Grate Instruction Manual
- June 2, 2024
- EUFAB
Table of Contents
- EUFAB 17467 Magnetic Mobile Phone Holder for Mounting to Ventilation
- Product Information
- Product Usage Instructions
- FAQs
- PROPER USE OF THE PRODUCT
- SAFETY PRECAUTIONS
- OPERATING INSTRUCTIONS
- MAINTENANCE AND CARE
- CONTACT INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EUFAB 17467 Magnetic Mobile Phone Holder for Mounting to Ventilation
Grate
Product Information
Specifications
- Secure to the ends of the ventilation grate using the hard rubber clamp
Product Usage Instructions
1. Proper Use of the Product
The mobile phone holder is designed to mount mobile telephones to the dashboard of a vehicle. It is attached to the ends of the ventilation grate without the need for adhesive or screws. The phone is held in place with a magnetic metal plate and a magnet on the holder. This product is not intended for use by children, individuals with limited mental abilities, or those lacking experience or necessary knowledge. Keep it out of reach of children. Using the product correctly also involves following all instructions provided, especially the safety guidelines. Any other use is considered misuse and may result in damage or injury. EAL GmbH is not liable for damages due to improper use.
2. Scope of Delivery
- 1x mobile phone holder
- 1x magnetic metal plate with adhesive coating
3. Mounting Instructions
To mount the mobile phone holder, attach the hard rubber clamp to one end of the ventilation grate in your vehicle.
To attach your mobile phone to the holder, simply place the phone with the magnetic metal plate onto the holder.
4. Additional Tips
Avoid exposing your mobile phone to direct airflow. Close the corresponding ventilation flap to prevent overheating when the vehicle’s heating is on or condensation when the air conditioning is running.
FAQs
- Q: Can the magnetic metal plate damage my phone?
- A: The metal plate is designed to be safe for use with mobile phones and should not cause any damage when used correctly.
- Q: Can this holder be used with all types of mobile phones?
- A: As long as your phone is compatible with magnetic mounting, it should work effectively with this holder.
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes! Not observing such may lead to personal injury, and damages to the device or your property! Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well. Please check the contents of the package for integrity and completeness prior to use!
PROPER USE OF THE PRODUCT
The mobile phone holder is used to mount mobile telephones to the dashboard of a vehicle. It is fitted to the fins of the ventilation grate in the vehicle and does not need adhesive or screws to mount. The mobile telephone is mounted with the help of a magnetic metal plate and the magnet of the phone holder. This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device. Utilisation according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety instructions. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
SCOPE OF DELIVERY
- 1x mobile phone holder
- 1x magnetic metal plate with adhesive coating
SPECIFICATIONS
- Secure to the fins of the ventilation grate using the hard rubber clamp
SAFETY PRECAUTIONS
- The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure yourself or damage the device.
- Children may not play with the device.
- Cleaning and user maintenance may not be carried out by children without supervision.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product for its designated purpose!
- Do not manipulate or disassemble the device!
- The telephone mounted using the mobile phone holder may not obstruct the driver‘s vision.
- The telephone mounted using the mobile phone holder may not hinder the driver when operating the vehicle.
- All operating elements of the vehicle must remain freely accessible.
- Observe all country-specific laws when it comes to the use of mobile telephones in traffic situations.
OPERATING INSTRUCTIONS
Attaching the adhesive magnetic metal plate: If you use a protective case for your mobile telephone, remove this first. Clean the rear of your mobile telephone to remove dirt, dust and grease. To do this, read the care instructions in the manual for your mobile telephone. Remove the protective film from the adhesive coating of the magnetic metal plate. Firmly press the metal plate, as centrally as possible, onto the rear of your mobile phone.The magnetic metal plate is so thin in its dimensions that the majority of protective cases can be fitted over the top of it.
Mounting the mobile phone holder:
Fit the hard rubber clamp to one fin of the ventilation grate in your vehicle
Mounting the mobile telephone to the holder:
Simply place the telephone, with the fitted metal plate, onto the handy holder.
- Do not expose your mobile telephone to the direct airflow. Close the relevant ventilation flap. Otherwise, the phone may become overheated when the vehicle heating is running, or condensation may form when the air conditioning is operating.
- Depending on the protective cover used, it is possible that optimum adhesion will not be achieved
The magnetic plate can be removed from your mobile device by carefully lifting the plate from the rear of the mobile device using the blade of a knife.
- Do not use aggressive cleaners or solvents to remove adhesive residue. For more information, read the care notes for your mobile device.
- Depending on the protective cover used, it is possible that optimum adhesion will not be achieved.
- The adhesive may cause permanent discolouration of the device surface at the point at which the adhesive was applied.
To remove the mobile phone holder, pull it off the fins of the ventilation grate. It may be necessary to hold the fin to prevent the grate and its mechanisms from being damaged.
MAINTENANCE AND CARE
When used as directed, the phone holder is maintenance-free.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of the phone holder at the end of its lifetime via the recycling container or the public/municipal collection points. The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other forms of reusing waste equipment!
CONTACT INFORMATION
EAL GmbH
- Otto-Hausmann-Ring 107
- 42115 Wuppertal, Germany
- +49 (0)202 42 92 83 0
- +49 (0) 202 42 92 83 – 160
- info@eal-vertrieb.com
- www.eal-vertrieb.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>